|
Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.
|
139.00 |
|
|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
71.99 |
|
|
1-1/8" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Boxed: 50ft. / (15.24m)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.39" / (mm) 35.4
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45
Bend Radius: (inch) 3.5" / (mm) 8.9
*Burst Pressure is 4 x Working Pressure
|
118.87 |
|
|
1-1/8" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.433" / (mm) 36.4
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 6.80
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
137.32 |
|
|
Solid Braid Polyester Cord Hank - 1/8" x 50' - White
Utility Cordage
Features:
Solid braid polyester cord
Mildew and rot resistant
Excellent for many quick tie and flag halyard applications
|
2.33 |
|
|
Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.
|
199.00 |
|
|
Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.
|
41.99 |
|
|
3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black
Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.
Features:
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose (distribution, return, vent and transfer)
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50 ft. (15 m) Boxed
Specifications:
Inner Diameter: (inch) 3/8" / (mm) 9.50
Outer Diameter: (inch) 0.681 / (mm) 17.3
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 2" / (mm) 50.8
Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10
|
127.31 |
|
|
5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - Black
Trident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.
Features:
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50 ft. (15 m) Boxed
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) 0.960 / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2
|
160.07 |
|
|
Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.
|
48.29 |
|
|
3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray
This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.
Features:
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50’ (15m) Boxed
Specifications:
Inner Diameter: (inch) 3/8" / (mm) 9.50
Outer Diameter: (inch) 0.588 / (mm) 14.9
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 4" / (mm) 101.6
Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15
|
121.68 |
|
|
5/8" x 50' Boxed Reinforced PVC (FDA) Hot Water Feed Line Hose - Drinking Water Safe - Translucent Red
Trident 166 Series Red - polyester reinforced PVC hose for "Hot Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures of up to 149ºF (65ºC) and can handle pressures to a maximum of 250 psi (varies based on i.d size).
Features:
The Red cover allows for easy identification of "Hot Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for hot, pressurized applications, hot water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Red Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) .866 / (mm) 22.5
Working Pressure: (PSI Vac In./Hg) 230 / (bar) 16
Bend Radius: (inch) 1.26" / (mm) 32
*Burst Pressure is 4 x Working Pressure
|
53.88 |
|
|
5/8" x 50' Boxed Reinforced PVC (FDA) Cold Water Feed Line Hose - Drinking Water Safe - Translucent Blue
Trident 165 Series Blue - polyester reinforced PVC hose for "Cold Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures as low as -18.4ºF (- 28ºC) and can handle pressures up to 250 psi (varies based on I.D size).
Features:
The Blue cover allows for easy identification of "Cold Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for cold pressurized applications, water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Blue Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) .866 / (mm) 22.5
Working Pressure: (PSI Vac In./Hg) 230 / (bar) 16
Bend Radius: (inch) 1.26" / (mm) 32
*Burst Pressure is 4 x Working Pressure
|
53.88 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
189.00 |
|
|
1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1-1/4" / (mm) 31.8
Outer Diameter: (inch) 1.40" / (mm) 32
Working Pressure: (Psi) 70 / (bar) 4.8
Bend Radius: (inch) 1.5" / (mm) 38
Weight: (Lb./50ft.) 35 / (Kg/m) 15.7
*Burst Pressure is 4 x Working Pressure
|
425.15 |
|