|
Race Sheave - Acetal Ball Bearing - 50mm(1-15/16") OD
Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.
Acetal Sheaves:
Choice of bearings
Solid bearing - high strength and durability, utilizing the self-lubricating properties of Acetal
U.V. resistant Acetal sheaves
|
5.29 |
|
|
Series 40 AP Sheave - Acetal Solid Bearing - 40mm(1-9/16")OD
Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.
Acetal Sheaves:
Choice of bearings
Solid bearing - high strength and durability, utilizing the self-lubricating properties of Acetal
U.V. resistant Acetal sheaves
|
5.99 |
|
|
Race Sheave - Acetal Ball Bearing - 66mm(2-5/8") OD
Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.
Acetal Sheaves:
Choice of bearings
Solid bearing - high strength and durability, utilizing the self-lubricating properties of Acetal
U.V. resistant Acetal sheaves
|
7.92 |
|
|
Race Sheave - Acetal Ball Bearing - 28mm(1-1/8") OD
Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.
Acetal Sheaves:
Choice of bearings
Solid bearing - high strength and durability, utilizing the self-lubricating properties of Acetal
U.V. resistant Acetal sheaves
|
3.52 |
|
|
Series 60AP Rope Sheave - Acetal Solid Bearing - 60mm(2-3/8") OD
Ronstan’s range of Acetal sheaves is moulded from a specially modified ultra-violet resistant grade of material to provide a long service life in the tough marine environment. Acetal is well suited to the application, with characteristics of high strength and resistance to impact and wear. It also exhibits excellent low friction properties for bearing applications. .
Features:
High strength and durability, utilizing the self-lubricating properties of Acetal
U.V. resistant acetal sheaves
|
7.06 |
|
|
Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex Key
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Adjustable Mid Mount
Fits rails with 1-1/4" or 1-5/16" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
96.68 |
|
|
Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve
Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
73.16 |
|
|
Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve
Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
73.16 |
|
|
Stainless Steel Clamp-On Rod Holder
Stainless Steel
Type 316
Polished
Features and Benefits
Adjustable clamp to fit multiple pipe and tube sizes
For use on vertical and horizontal pipe/tube
Rotate and lock in fishing angle
Rotates and locks every 18°
Form-fitted PVC White Liner
Specifications:
Clamp Fits (Outside Diameter):1-11/16" & 1-15/16" O.D. (Pipe)
Location:T-Top, Leaning Post & Poling Platform Leg
Rod Holder Inside Diameter: 1-5/8"
|
147.61 |
|
|
Stud Catch
Length: 1-15/16"
Width: 3/8"
Fastener: #6(4)
Material: Brass
|
4.98 |
|
|
Race Acetal Sheave Solid Bearing - 39mm(1-1/2") OD
Features:
High strength & durability, utilizing the self-lubricating properties of Acetal
|
4.40 |
|
|
Series 30 Utility Ball Bearing Block - Single, Swivel Shackle Head
Features:
Low friction 2-stage ball bearing system provides consistent performance over the full working load range.
High static and dynamic load capacity.
Light weight
Versatile head fittings
Product Information:
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Can be fitted with a shackle in either of two planes to allow correct alignment of the block.
Applications:
Primary lead blocks on dinghies and catamarans
Control lines on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Acetal ball bearings
Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks
Grade 316 stainless steel load straps and head fittings
|
23.11 |
|
|
Series 30 Utility Ball Bearing Block - Single, Becket, Swivel Shackle Head
Features:
Low friction 2-stage ball bearing system provides consistent performance over the full working load range.
High static and dynamic load capacity.
Light weight
Versatile head fittings
Cheek cut-outs for easy bearing maintenance
Product Information:
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.
Applications:
Primary lead blocks on dinghies and catamarans
Control lines on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Acetal ball bearings
Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks
Grade 316 stainless steel load straps and head fittings
|
36.82 |
|
|
Series 30 Utility Ball Bearing Block - Stand-up, Loop Top
Features:
Low friction 2-stage ball bearing system provides consistent performance over the full working load range.
High static and dynamic load capacity.
Light weight
Versatile head fittings
Priduct Information:
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.
Applications:
Primary lead blocks on dinghies and catamarans
Control lines on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Acetal ball bearings
Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks
Grade 316 stainless steel load straps and head fittings
|
20.54 |
|
|
Spinnaker Pole Ring - Curved Base - 30mm(1-3/16") ID
Features:
Suits most common mast profiles
Grade 316 Stainless Steel
Specifications:
Material Ø: 6.4mm(1/4")
Ring Ø: 30.0mm(1-3/16")
Mast Ø: 60.0mm(2-3/8")
Weight: 45g(1.6oz)
|
42.84 |
|