|
Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve
Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve
Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with Sleeve
Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with Sleeve
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Horizontal
Fits rails with 1.66" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Aluminum Clamp-On Rod Holder - Horizontal - 2.375" OD
Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex Key
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Adjustable Mid Mount
Fits rails with 1-1/4" or 1-5/16" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
107.70 |
|
|
1" Polished SS Adjustable Clamp-On Rod Holder
Choose the angle you need while providing the versatility of mounting either horizontally or vertically
Clamp-on rod holders are sized IPS pipe
Includes a heavy white vinyl liner
Rod holder ID 1-5/8"
|
92.93 |
|
|
1-1/4" Polished SS Adjustable Clamp-On Rod Holder
Choose the angle you need while providing the versatility of mounting either horizontally or vertically
Clamp-on rod holders are sized IPS pipe
Includes a heavy white vinyl liner
Rod holder ID 1-5/8"
|
92.93 |
|
|
1-1/2" Polished SS Adjustable Clamp-On Rod Holder
Choose the angle you need while providing the versatility of mounting either horizontally or vertically
Clamp-on rod holders are sized IPS pipe
Includes a heavy white vinyl liner
Rod holder ID 1-5/8"
|
92.93 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5005SL
Color: Silver
Fits: 2.375" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5005GL
Color: Gold
Fits: 2.375" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
165.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe
Color:Black
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe
Color:White
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5205SL
Color: Silver
Fits: 2.375" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5205GL
Color: Gold
Fits: 2.375" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
165.38 |
|