|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 14mm(9/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
11.64 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
11.64 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 14mm(9/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
10.97 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
9.85 |
|
|
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
May be glued or pressed into place
Impact resistant, UV stabilized Nylon
|
8.04 |
|
|
Fairlead - Stainless Steel Lined - 14mm(9/16") ID - Black
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.
Features:
Impact resistant, U.V. stablised Nylon
Stainless steel liner
|
6.17 |
|
|
Snatch Block Acetal Sheave - Single - 11mm(7/16") Max. Rope Diameter
Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when the load is released. The standard snap shackle head allows the block to swivel through 360°. Soft resilient cheeks reduce clatter and protect gelcoat and painted surfaces. Attachment point provided for shock cord hanger.
Features:
Easily operated latch mechanism
Lightweight
Soft resilient cheeks
Applications:
Temporary sheeting point while changing sheets for boats up to 10M (33')
Temporary reefing block for boats up to 10M (33')
Spare or replacement block for general use on larger boats depending on line angle and load
Materials:
U.V. stabilized Acetal sheaves
Grade 316 stainless steel frame and load strap
Soft thermoplastic rubber cheeks
Investment cast Grade 15-5PH stainless steel snap shackle
Specifications:
Sheave Ø: 51mm(2")
Max. Rope Ø: 12mm(1/2")
M.W.L.: 500kg(1,100lbs)
B.L.: 1,000kg(2,200lbs)
Weight: 250g(8.8oz)
|
152.66 |
|
|
Split Ring - 11mm(7/16") Diameter
Suits Clevis Pins RF260-RF266
|
0.86 |
|
|
xSonic SS60 Stainless Steel 20° Tilt Thru-Hull Depth/Temp Transducer - 9-Pin - 10M Cable
The SS60 is a stainless steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
Dual Frequency - Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSSevo3, Lowrance HDS G3
|
403.61 |
|
|
Compression Handle - Nylon White/Stainless Steel - Locking
Compression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for compartments or hatches.
Features:
Outer Diameter: 3"
Cut-Out:2-1/2"
Surface Depth: 1/8" - 3/4"
Shaft Length: 1-9/16 - 1-3/4"
|
48.28 |
|
|
Compression Handle - Nylon White/Stainless Steel - Non-Locking
Compression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for compartments or hatches.
Features:
Outer Diameter: 3"
Cut-Out:2-1/2"
Surface Depth: 1/8" - 3/4"
Shaft Length: 1-9/16 - 1-3/4"
|
41.22 |
|
|
Sailmaker Stainless Steel Thimble - 5mm(3/16") Cable Diameter
Used to create eyes in both rope and wire rope
|
7.06 |
|
|
Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter
Used to create eyes in both rope and wire rope
|
13.75 |
|
|
XKA Stainless Steel Trim Tab Kit with One-Touch Control - 9 x 12
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
Lectrotab's one-touch leveling LED control puts the complete control of your trim tabs at your fingertips.
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm)
Boat Length - 16' to 25' (5 to 7.5 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Rocker Switch Dimensions (W x H) - 3" x 3" (77 x 77 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2.5" (57 to 64 mm)
Rocker Switch Operating Voltage - 12 or 24 V
In the Box:
One (1) One-Touch Control
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
988.80 |
|
|
XKA Stainless Steel Trim Tab Kit with MLC-1 Control - 9 x 12
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button. It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight.
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm)
Boat Length - 16' to 25' (5 to 7.5 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting Hole Cutout - 2" (50 mm)
Control Operating Voltage - 12 or 24 V
In the Box:
One (1) Manual Leveling Control
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
997.04 |
|