Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 5mm(3/16") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 4mm(5/32") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 3mm(1/8") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 6mm(1/4") Cable Diameter Used to create eyes in both rope and wire rope

Welded Ring - 8mm(5/16") Thickness - 42.5mm(1-5/8") ID Round Welded Stainless Steel Ring 8mm(5/16") Thickness 42.5mm(1-5/8") Inner Diameter

Stainless Steel Cushion Clamp - 5/16" - 10-Pack Nominal Diameter:5/16" (8mm) Thickness: 0.04 Width: 3/8" (10mm) Screw Size: #8 Prevents corrosion Resistant to oils, acids, saltwater Temperatures range from -50° to 300°F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Chain Stopper - 5/16" - 3/8" Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.

Fairlead - Stainless Steel Lined - 14mm(9/16") ID - Black Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance. Features: Impact resistant, U.V. stablised Nylon Stainless steel liner

Thimble Shackle - Captive Pin - Diameter 8mm - 5/16" Features: Thimble shackle with captive pin forged in grade 316L stainless steel Allows to spliced a rope without adding an additional thimble With the captive pin, no risk to lose the pin Outstanding working and breaking loads Applications: Mainsheet halyards Max rope size: 12mm Specifications: Materials 316 stainless steel grade Working load (lb) 2200 Breaking load (lb) 6610 Weight (lb) 0.172 Dimensions (see 2nd image): A (inch) 1-39/64" B (inch) 5/8" C (inch) 5/16" D (inch) 5/8" D diameter (inch) 5/16" E (inch) 9/32" F (inch) 2-63/64" G (inch) 1-21/32"

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope Diameter Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load. Features: 360° Rotation Small T-Cleat & Fairlead Applications: Sheet leads and halyards on dinghies and catamarans Materials: Alloy cleating arms Grade 316 Stainless Steel fittings

V-Cleat Open - Medium - 4-8mm(3/16" - 5/16") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

V-Cleat Fairlead - Medium - 4-8mm(3/16" - 5/16") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

Wire Rope Grip - Size 8 - 8mm(5/16") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused

S-Hook - 8mm(5/16") Diameter S-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release. Grade 316 stainless steel