|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
11.64 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 14mm(9/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
11.64 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
9.85 |
|
|
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
May be glued or pressed into place
Impact resistant, UV stabilized Nylon
|
8.04 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 14mm(9/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
10.97 |
|
|
Fairlead - Stainless Steel Lined - 14mm(9/16") ID - Black
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.
Features:
Impact resistant, U.V. stablised Nylon
Stainless steel liner
|
6.17 |
|
|
Stainless Steel Deck Step 2-1/4" x 8-3/8"
Injection Molded Rubber/Stamped 304 Stainless Steel
These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.
|
20.78 |
|
|
Snatch Block Acetal Sheave - Single - 11mm(7/16") Max. Rope Diameter
Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when the load is released. The standard snap shackle head allows the block to swivel through 360°. Soft resilient cheeks reduce clatter and protect gelcoat and painted surfaces. Attachment point provided for shock cord hanger.
Features:
Easily operated latch mechanism
Lightweight
Soft resilient cheeks
Applications:
Temporary sheeting point while changing sheets for boats up to 10M (33')
Temporary reefing block for boats up to 10M (33')
Spare or replacement block for general use on larger boats depending on line angle and load
Materials:
U.V. stabilized Acetal sheaves
Grade 316 stainless steel frame and load strap
Soft thermoplastic rubber cheeks
Investment cast Grade 15-5PH stainless steel snap shackle
Specifications:
Sheave Ø: 51mm(2")
Max. Rope Ø: 12mm(1/2")
M.W.L.: 500kg(1,100lbs)
B.L.: 1,000kg(2,200lbs)
Weight: 250g(8.8oz)
|
152.66 |
|
|
Welded Ring - 8mm(5/16") Thickness - 42.5mm(1-5/8") ID
Round Welded Stainless Steel Ring
8mm(5/16") Thickness
42.5mm(1-5/8") Inner Diameter
|
11.45 |
|
|
Split Ring - 11mm(7/16") Diameter
Suits Clevis Pins RF260-RF266
|
0.86 |
|
|
Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter
Used to create eyes in both rope and wire rope
|
13.75 |
|
|
Stainless Steel Cushion Clamp - 9/16" - 10-Pack
Nominal Diameter:9/16" (14mm)
Thickness: 0.06
Width: 1/2" (13mm)
Screw Size: #10
Prevents corrosion
Resistant to oils, acids, saltwater
Temperatures range from -50° to 300°F
Absorbs shock and vibration
Reduces unwanted noise
1/4" clearance mounting hole
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.26 |
|
|
Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX-1513-4 - 4-Blade - 15.3" x 13 Pitch
The Prop that put the "four" in Perfourmance! Turning Point's Four Blade revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: two blades utilize the high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.
Now manufactured in the Industry leading TP17 stainless, the Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.
Proprietary Stainless Steel, TP17™
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
384.55 |
|
|
Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX-1513-4L - 4-Blade - 15.3" x 13 Pitch
The Prop that put the "four" in Performance! Turning Point's Four Blade revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: two blades utilize the high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.
Now manufactured in the Industry leading TP17 stainless, the Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.
Proprietary Stainless Steel, TP17™
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
384.55 |
|
|
Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX-1423-4 - 4-Blade - 14.3" x 23 Pitch
The Prop that put the "four" in Performance! Turning Point's Four Blade revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: two blades utilize the high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.
Now manufactured in the Industry leading TP17 stainless, the Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.
Proprietary Stainless Steel, TP17™
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
384.55 |
|