|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
12" Vertical Mount
Compatible with Vertical Radars, Satellite Domes, Dome Lights, and Night/Thermal Vision Cameras
12" Tall
Vertical
Round
|
315.90 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
6" Vertical Mount
Compatible with Vertical Radars, Satellite Domes, Dome Lights, and Night/Thermal Vision Cameras
6" Tall
Round
Vertical
|
262.80 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
12" Aft Angled Mount
12" tall
Aft Raked 30 degrees
|
336.60 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
12" Heavy Duty Aft Mount
12" Tall
Aft raked 30 degrees
|
543.60 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
18" Aft Angled Mount
18" tall
Aft Raked 30 degrees
|
477.90 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
6" Aft Angled Mount
6" tall
Aft Raked 30 degrees
|
289.80 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
24" Aft Angled Mount
24" tall
Aft Raked 30 degrees
|
537.30 |
|
|
The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.
Features:
All-new sleek, modern design
First all modular system - extremely versatile
Simple selection and installation
Easy to add accessories
Powder coated aluminum
Requires Vision Mounting Plate to install radar or sat dome antenna
36" Aft Angled Mount
36" tall
Aft Raked 30 degrees
|
703.80 |
|
|
Wedge kit for 0-4 degree angle adjustment - 7" diameter
While underway, the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 67550 0-4 degree Wedge for Round Base Vision Mounts the elevated bow will be offset aligning your radar to see better. Edson's 0-4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Base Mount and Mounting Plate sold separately
**NOTE: ONLY COMPATIBLE with Vertical Round Base Vision Series Mounts (68930, 68900, 68770, 68910, 68730, 68740)**
|
104.40 |
|
|
Wing w/Light Arm Receiver
Edson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Specifications:
Base Mount and Mounting Plate sold separately
For Vertical Mounts
37" Wide
|
372.07 |
|
|
Light Arm Receiver f/Vertical Mounts
Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.
Base Mount and Mounting Plate sold separately.
|
51.30 |
|
|
Vision Series Mounting Plate for Simrad HALO™ Open Array
Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family.
The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style.
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
89.99 |
|
|
Light Arm for Radar Domes and Sat Domes
Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.
Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
194.40 |
|
|
Light Arm for Open Array Radars
Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar.
Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.
Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).
Specifications:
Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)
Base mounts sold separately
|
209.70 |
|
|
The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas. It is constructed from lightweight aluminum and is powder-coasted white for a durable finish. For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System.
Features:
Rugged Design
Marine-grade aluminum construction
Powder-coated white
Rivets included for mast attachment
Easy installation
First all modular system - extremely versatile
Simple selection and installation
Requires Vision Mounting Plate to install radar or sat dome antenna
Mast Mount Radar Platform
For sailboats and trawlers
Swivel Feet fit most masts
Rivets included
|
484.20 |
|