Light Arm for Radar Domes and Sat Domes Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.  Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

Light Arm for Open Array Radars Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

GPS Mount with Light Extension Adapter Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The  powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light.  *Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.* The 67400 GPS Mount with Light Extension Adapter requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Vision Series Mounting Plate for Simrad HALO™ Open Array Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family. The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style. Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.

Light Arm Receiver for Aft Angled Mounts The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Light Arm Receiver f/Vertical Mounts Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Base Mount and Mounting Plate sold separately.

Vision Series Mounting Plate for Simrad HALO™ Open Array - Hard Top Only This powder coated marine-grade aluminum plate is used to mount a Simrad HALO™ Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops. This product is used independently and is not compatible with the other Vision Series Mounts and Plates.

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately. 

Attwood LED 12V Combination Anchor/Streaming Light Edson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters) The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Perko Combination Anchor/Steaming Light (50" Wire Length) Edson offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. All-Round White Light with 12 volt bulb and is constructed of Black Polymer and Chrome Plated Zinc Alloy Top.  Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length The 67500 Perko Combination Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Universal Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Universal Mounting Plate fits most brand and models 2kW, 4kW and Braodband Radars.  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Mounting Plate for Raymarine T300 & T400 Thermal Cameras and Flir M-Series- Year 2017 and Newer With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Year 2017 and NEWER Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras and FLIR M-Series (M-324XP, M-625XP, M-324L, M-625L, M-612L, M-618CS, M-324S, M-324CS, M-625S, M-625CS, M-617CS, M132, M232).  Mounting Plates are required to complete an Edson Vision Series Mounting System. Order Base mount separately.  *7.8-inch Diameter with NO WING MOUNT CAPABILITIES

The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas.  It is constructed from lightweight aluminum and is powder-coasted white for a durable finish.  For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System. Features: Rugged Design Marine-grade aluminum construction Powder-coated white Rivets included for mast attachment Easy installation First all modular system - extremely versatile Simple selection and installation Requires Vision Mounting Plate to install radar or sat dome antenna Mast Mount Radar Platform For sailboats and trawlers Swivel Feet fit most masts Rivets included

Furuno & Sitex Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and  Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Simrad/Lowrance/ B&G 2kW & 4G Radar Domes Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68530 Vision Series Mounting Plate is designed for Simrad, Northstar, B&G, & Lowrance 2kW, HD, 3G, & 4G Radar Domes (LRA-1800, NS007001, DX42S-1).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately