LED Courtesy Light - Surface Mount - White The light has an ABS housing featuring a diamond-cut lens and a white snap-on trim ring with white LEDs. It is great for illuminating walkways or steps and is available in 12V only. Features: Blue LEDs with white trim 15 Lumens 12 Volt 0.5 W IP65 *The "P" within the part number indicates retail packaging

LED Courtesy Light - Surface Mount - Blue The light has an ABS housing featuring a diamond-cut lens and a white snap-on trim ring with blue LEDs. It is great for illuminating walkways or steps and is available in 12V only. Features: Blue LEDs with white trim 15 Lumens 12 Volt 0.5W IP65 *The "P" within the part number indicates retail packaging

Deluxe LED Courtesy Light - Front Facing - White Large Deluxe LED Courtesy Lights are constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. Available with outward directed light or downward directed light. These lights feature 3 low amperage, long life blue or white LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9–28VDC. IP67 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deluxe LED Courtesy Light - Down Facing - White  Large Deluxe LED Courtesy Lights are constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. Available with outward directed light or downward directed light. These lights feature 3 low amperage, long life white LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9–28VDC. IP67 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Docking Lights - Stainless Steel - White LED - Pair Compared to its 55-watt halogen competition, the Attwood Surface Mount LED Docking Light draws a fraction of the power while producing a brighter output. The Attwood product also transmits light in a much broader pattern as opposed to a narrow beam generated by today’s competitors. Simply put, Attwood’s docking light performs like a true “docking light” instead of a narrow-beam headlight.  Power draw and performance are important, but what about assembly? At 1.2" thick, the lights are designed to be mounted directly to the surface of the hull. With only a small hole for wiring and three (3) screws for attachment, Attwood’s surface mount design makes installation quick and ncomplicated.  This new LED Docking Light allows for fewer hull cuts and minimal intrusion while producing results that are reliable and attractive. Backed by a 10-year warranty, Attwood’s LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless Steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4-LED Deck Light - Flat Mount - White Housing Unique, low profile LED multi-purpose deck light designed for flat mount. Ideal for hard tops, consoles, interior cabin, under gunnel. Features: USCG, ISO and SAE certified for Ignition Protection* 10.0 Watt equivalent to a 55 Watt halogen flood light Powerful 700 lumen output with 100° spread beam angle 12-24 volt applications Very low power consumption (0.9 amps @ 12V, 0.5 amps @ 24V) 8' hidden power cable Available mounting options: Stainless Steel Swivel Bracket or 3M adhesive tape Compact design bolts directly to any flat surface 5" long and 1-3/8" width Material Characteristics White or Black UV-resistant Polycarbonate housing Durable and self-extinguishing clear plastic lense Anodized Aluminum heatsink LED chips are silicone potted for IP67 Waterproof (non-submersible) *Completely sealed lights have been tested in an explosive environment and exposed to an explosive atmosphere in high temperature that includes powering on-off 50 times without igniting the atmosphere at a temperature not exceeding 200° C. These certificates demonstrate the ability to consistently provide product that meets statutory and regulatory requirements that assure customer satisfaction and safety. Ideal for use in engine rooms, battery compartments and anywhere fire safety is of most importance.

LED Starr Light - Recess Mount Operates 9-16 Volt DC Systems Rated @ 100,000 Hours of Service Life Requires 1.25" Hole Shock and Vibration Proof Cool to the Touch No Corrosion Rated for Underwater Use 3 LEDs 1.82" x 1.85" LED Color: White WARNING: This product can expose you to chemicals including STYRENE,Acrylonitrile which are known to the State of California to cause cancer, and 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Maxillume tr150 LED Flood Light - Surface Mount Rugged, reliable, with 20,000 measured lumens – the Maxillume tr150 LED work light will change the way you work at night. Your workers will be safer, faster, more effective, and more productive. Completely sealed to IP67 standards. Tested to military specifications for shock and vibration. The member of Lumitec’s Maxillume family is the standard for 150W LED spot/flood lighting WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.   For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.   Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.   Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.    In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.   When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.   Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.   ACR RCL-300 Remote Controlled Searchlight - 12V/24V The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.   Underwater Lighting Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue. XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.   For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.     Fair Winds, Smooth Sailing. ____________________________________________________________________________________________________ To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.     Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com  

Surface Mount Oblong LED Courtesy Lamp - White LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Warm White LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Red LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Blue LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Strip Light w/Switch - Warm White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE