Surface Mount Oblong LED Courtesy Lamp - Blue LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - White LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Warm White LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Red LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Strip Light w/Switch - White/Blue LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

EuroLED 175 Surface Mount Touch Lamp - Blue/White LED - White Housing Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED® Touch lamps provide red / white light using the latest completely sealed touch sensitive technology. Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required. Dual color EuroLED® Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption. EuroLED® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort. The durability of EuroLED® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt™ circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations. Specifications: Lens Material: UV resistant enhanced impact acrylic Shroud Material: Heavy duty nylon Color Temperature: 5000K (White) Cable: Pre-wired with 2.5M of three core marine cable Operating Voltage: Multivolt 9-33V DC Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V ) Degree of Protection: IP 6K6 6K7 - Completely Sealed Weight: 290g (including cable) Installation: Surface mount with robust bush mount Approvals: CE, ISO 8846 (Ignition Protection)

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Chrome Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - White Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Brushed Nickel Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Profile P1120 Tri-Light Surface Light - Red, Warm White & Blue - Chrome Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Warm White & Blue - White Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Warm White & Blue - Brushed Nickel Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Blue LED Micro Light with Stainless Steel Bezel & Vertical Mount This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail.  Features:  0.66-watt draw at 12 volts DC Blue LEDs Rated for 50,000+ hours of use

White LED Micro Light with Stainless Steel Bezel & Vertical Mount This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail.  Features:  0.66-watt draw at 12 volts DC White LEDs Rated for 50,000+ hours of use

Mirage - Flush Mount Down Light - Glass Finish/Polished Stainless Steel Bezel - 4-Color Red/Blue/Purple Non Dimming with White Dimming Lumitec's Mirage down lights remain the best performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20 watt halogens.* Equally suited to elegant salons or no-nonsense T-tops. (*6 watt devices will exceed output of 20 watt halogens, 3 watt devices will exceed output of 10 watt halogens). Specifications: Voltage: 10 - 30V DC 12V DC Amps: 490mA 24V DC Amps: 250mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 6 Lumens (White): 372 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 3.25" (8.25cm) Height: 3.25" (8.25cm) Depth: 1.11" (2.81cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.