|
Cartridge Bilge Pumps 1000 GPH
The 1000 GPH incorporates some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. We have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Capacity 3 ft (0.9 m) head (13.6 V): 50 l/min - 800 GPH
Capacity Straight: 63 l/min - 1000 GPH
Amperage: 3.2 A
Fuse Size: 5 A
Connection: 3/4"
Max Height: 112 mm - 4.4"
Weight: 0.27 kg - 9.6 oz.
|
40.74 |
|
|
Cartridge Bilge Pumps 500 GPH
For 500 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH
Capacity Straight: 40 l/min - 630 GPH
Amerpage: 2.5A
Fuse Size: 5 A
Connection: 3/4"
Max Height: 112 mm - 4.4"
Weight: 0.27 kg - 9.6 oz.
|
28.09 |
|
|
Cartridge Bilge Pumps
For 500 GPH, 750 GPH, and 1000 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
Features:
Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH
Capacity Straight: 50 l/min - 800 GPH
Amperage: 3 A
Fuse Size: 5 A
Connection: 3/4"
Max Height: 112 mm - 4.4"
Weight: 0.27 kg - 9.6 oz.
|
36.14 |
|
|
Heavy Duty Bilge Pump 2200 series 12v
The best choice when you are looking for high performance, heavy duty pumps
designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.
CE-Approved
Features:
Heavy duty, 12-pole double ball bearing motor
Liquid cooled for extended motor life
Quality engineered mechanical/lip seal
ISO 8849 Marine and CE standards
Easily interchangeable with most similar bilge pumps
Pump body: Thermoplastic
Shaft seal: Mechanical seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V
Capacity 1.0 m head (13.6 V/27 V): 120 l/min - 1900 GPH
Capacity straight (13.6 V/27 V): 130 l/min - 2060 GPH
Amperage: 7.5 A
Fuse Size: 12 A
Connection: 1-1/8" and 1-1/4"
Shaft: SS2343
Wire size: 1.3 mm2 - 16 GA
Max height 177 mm - 7"
Weight 2.7 kg - 6 lbs
|
117.78 |
|
|
Heavy Duty Bilge Pump 4000 Series 12v:
The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.
CE-Approved
Features:
Heavy duty, 12-pole double ball bearing motor
Liquid cooled for extended motor life
Quality engineered mechanical/lip seal
ISO 8849 Marine and CE standards
Easily interchangeable with most similar bilge pumps
Pump body: Thermoplastic
Shaft seal: Mechanical seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V
Capacity 1.0 m head (13.6 V/27 V): 164 l/min - 2600 GPH
Capacity straight (13.6 V/27 V): 252 l/min - 4000 GPH
Amperage: 15 A
Fuse Size: 25 A
Connection: 1-1/8" and 1-1/4"
Shaft: SS2343
Wire size: 2 mm2 - 14 GA
Max height 216 mm - 8.5"
Weight 2.45 kg - 5.4 lbs
|
177.78 |
|
|
First Mate HP 400 GPH 12V - Threaded Port
Submersible 400GPH Bilge Pump explicitly designed for Jet Ski, pontoon livewells, and PWC bilge applications where space is at a premium. Includes threaded discharge with 90-degree dura-port for easy routing.
Specifications:
Capacity (13.6V): 30 I/min - 400 GPH
Amperage : 2.5A
Fuse Size: 5A
Connection (inch): 3/4"
|
20.00 |
|
|
Heavy Duty Bilge Pump 1600 series 12v:
The best choice when you are looking for high performance, heavy duty pumps
designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.
CE-Approved
Features:
Heavy duty, 12-pole double ball bearing motor
Liquid cooled for extended motor life
Quality engineered mechanical/lip seal
ISO 8849 Marine and CE standards
Easily interchangeable with most similar bilge pumps
Pump body: Thermoplastic
Shaft seal: Mechanical seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V
Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH
Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH
Amperage: 7 A
Fuse Size: 10 A
Connection: 1-1/8" and 1-1/4"
Shaft: SS2343
Wire size: 1.3 mm2 - 16 GA
Max height 149 mm - 5.86"
Weight 1.3 kg - 2.75 lbs
|
94.81 |
|
|
Cartridge Bilge Pump 1250 GPH
The 1250 GPH incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved
Features:
Compact, all-in-one motor/impeller unit
No tools needed for maintenance
Extremely energy efficient
Water-cooled motor for long service intervals
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel (SS2343)
Voltage: 12 V DC
Capacity 3 ft (0.9 m) head (13.6 V): 60 l/min - 952 GPH
Capacity Straight: 73 l/min - 1150 GPH
Amerpage: 3 A
Fuse Size: 5 A
Connection: 1 1/8""
Max Height: 112 mm - 4.4"
Weight: 0.32 kg - 10.4 oz.
|
43.56 |
|
|
1000 GPH Multi Port Shower Sump Pump 12V with Switch
This compact shower sump system is designed to meet the higher demands of today's boating industry where more equipment is used. This also includes the freshwater system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling wastewater from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter.
*CE-Approved
Features:
Includes the L650 Duo pump and a mesh filter for easy cleaning
Multiple inlet ports
Handles wastewater from more than one tapping point
Tight-fitting lid to minimize splashing and odors
Check the valve on the outlet
Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH
Capacity straight (13.6 V/27 V):61 l/min - 972 GPH
Amperage: 3.4 A
Fuse Size: 5 A
Pump Body: Thermoplastic
Shaft Seal: Lip seal
Voltage: 12 V DC
Intake Hoses: 1x3/4", 1x3/4" or 1x1"
Discharge Hose: 3/4"
|
112.60 |
|
|
Spare Motor for Cartridge
Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier.
|
37.75 |
|
|
Thru-Hull Connector - 3/4" - 90° - White
90 Degree Thru-Hull Connector - When looks are important, these are the 90 degree fittings to use. The outside nut is secured to the threaded shaft with a deck plate key. There no threaded section protruding through the head or in need of sawing so its always a neat, finished installation.
Features:
Outside nut is secured to the threaded shaft with a deck plate key
No threaded section protruding through the head or need for saws
Makes for a neat, finished installation
Built with Johnson Pump quality
|
8.71 |
|
|
Yanmar 128397-42500 Engine Cooling Pump Bronze
Yanmar Engine Cooling Pump, Bronze, Full Cam, 3/4" Slip On Ports. Comes with Pulley and Mounting Bracket.
GMF YEU series, Johnson 10-24509-01 F4B-903
|
299.88 |
|
|
Little Giant Mag-Drive Pump 581603
Little Giant 3-MD-HC Magnetic Drive Pump
Motor 115 Volt 60 Hz 1/12 HP Open Fan Cooled Motor, 750 GPH at 1 Foot Head, Shutoff Head 21.9 Feet, Inlet: 3/4" FNPT, Outlet: 1/2" MNPT, Ryton Body, Fluid Temperature Up to 200F (93C), UR/C-CSA Listed, 6 Foot Power Cord
581603 Magnetically driven pump for highly corrosive chemicals and solutions. The MD-HC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
567.00 |
|
|
Jabsco 30642-1000 90 Degree 3/4" Port
|
6.18 |
|
|
Aerator Head - 9-3/4" Spray Bar with Shut Off Valve
Overall length 9-3/4", 3/4" thru-hull, one shut off valve
Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.
|
24.68 |
|