|
Spare Motor for Cartridge
Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier.
|
37.75 |
|
|
Spare Motor for Cartridge - 12volt
Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier.
|
22.97 |
|
|
Spare Motor for Cartridge
Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier.
|
29.77 |
|
|
Cartridge Combo
Combines the line of cartdrige bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
Specs:
Capacity 3' head (13.6V): 50l/min - 800 GPH
Capacity Straight (13.6V): 63l/min - 1000GPH
Amperage: 3.2A
Fuse Size: 5A
Connection: 3/4"
|
88.88 |
|
|
1000 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 3/4"
Includes Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 50 l/min - 800 GPH
Capacity straight (13.6V/27.2V): 63 l/min - 1000 GPH
Amperage: 3.2 A
Fuse size: 5 A
Connection: 3/4"
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 14.4 oz.
|
85.92 |
|
|
Aqua Void 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
28.44 |
|
|
Aqua Void 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
37.44 |
|
|
Micropump DG-F61.G1R2P5.J.B I Drive Motor J Mount
Replacement for Micropump I-Drive IEG
J-mount, Speed Control(0-5VDC)
Micropump I-Drive IEG, 0-5 VDC SPEED CONTROL INPUT; J-Mount
|
1649.51 |
|
|
Check Valve for Cartridge Pump
Johnson Pump's black plastic check valve for cartridge pumps.
|
8.06 |
|
|
Yanmar YM 119578-42501-J Engine Cooling Pump
Yanmar Replacement Engine Cooling Seawater Pump JMP #JPR-YM06LY3 (Replaces Yanmar 119578-42501, Johnson 10-13286-01)
|
867.37 |
|
|
JMP Marine Volvo Penta Replacement Engine Cooling Seawater Pump
Replaces Volvo Penta 3583115, 3581558, 860629, Johnson 10-24394-01, 10-24524-01
JPR-V1000 JMP Marine Volvo Penta Replacement Engine Cooling Raw Water Pump
Product Information & Specs:
Uses JMP Impeller p/n: 7400-01K
Port Type: 1" Hose
Pump Size (LxWxH): 129mm x 158mm x 90mm
Pump Weight (approx): 6.0 lbs (2.73 kgs)
Replaces Genuine Volvo Penta Pump p/n(s): 3583115 (Old 3581558, 860629)
Replaces Johnson Pump p/n(s): 10-24394-01, 10-24524-01
Engine Model(s): AD31/41/43, TAMD31/41/42, KAD32/42/43/44, KAMD42/43/44, MD31, TMD31/41
Parts Internally Compatible to Genuine: NO
Changes made: Ball Bearing, Screw for Cover, Cam, Screw for Cam, Gasket for Cam, End Cover, Mechanical Seal, O-Ring for End Cover, Oil Seal, Shaft, Small Snap Ring for Better Quality & Peformance
Product Features:
Universal Model
Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
Durable Double Ball Bearing
O-Ring Packing
High Performance Flexible Impeller
Mechanical Seal instead of Lip Seal
|
478.69 |
|
|
JMP Marine JPR-VP0020D Volvo Penta Replacement Seawater Pump
Replaces Volvo Penta 3583089, Johnson 10-13283, Ancor ST347, AN5893
Note: Pump Without Gear
Product Information & Specs:
Uses JMP Impeller p/n: 7100-01K
Pump Weight (approx): 4.25 LBS (1.93 KG)
Replaces Genuine Volvo Penta Pump: 3583089
Replaces Johnson Pump: 10-13283
Replaces Ancor Pump: ST347, AN5893
Engine Model(s): D2 SERIES
D2-55A/B/C/D/E/F, D2-75A/B/C/F
Parts Internally Compatible to Genuine: YES
Product Features:
Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
Lip Seal
High Performance Flexible Impeller
|
422.99 |
|
|
JMP Marine JPR-VP0050D Volvo Penta Replacement Seawater Pump
Replaces Volvo Penta 3838288, Johnson 10-24580-01
Note: Pump Without Gear
Product Information & Specs:
Uses JMP Impeller p/n: 7400-01K
Pump Weight (approx): 8.0 LBS (3.64 KG)
Replaces Genuine Volvo Penta Pump p/n: 3838288
Replaces Johnson Pump p/n: 10-24580-01
Engine Model(s): D5/D7 SERIES
D5A-A T/TA, D7A-A T/TA, D7C-A TA, D7A-B TA, D7C-B TA
|
516.23 |
|
|
JMP Marine JPR-WB08IP Westerbeke Replacement Cooling Pump
Includes:
JPR-WB08IP (Westerbeke Replacement Pump)
GAK0069 (Flange Mounting Gasket)
Product Information & Specs:
Uses JMP Impeller p/n: 7050-01K
Port Type: 3/8" Pipe
Pump Size (LxWxH): 91mm x 87mm x 82mm
Pump Weight (approx): 3.0 lbs (1.36 kgs)
Replaces Genuine Westerbeke Pump p/n: 48080
Westerbeke 48080 replaces 33636
Westerbeke 37431 replaces 33636
Replaces Johnson Pump p/n: 10-36006
Engine "Generator" Model(s):
4.0/4.4/6.0BCD, 4.4/7.7/8.0/11.0WMD, 20B Two, 30B3 Three
Parts Internally Compatible to Genuine: NO (Changes made to: Wear Plate, Mechanical Seal, Oil Seal, Shaft, Impeller for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK0089 (*Sold Separately)
Minor Service Kit: JSM0089 (*Sold Separately)
Product Features:
Universal Model Direct Replacement with Strong Bronze Body (Heavy Duty Marine Grade Casting), Long Life Mechanical Seal, High Performance and Long Life Flexible Impeller
Marine Grade Shaft (3X Series Non-Magnetic), Built-In Cam Housing, Designed with Easy Replacement of Spare Parts, Simple & Compact Design = Less Parts.
|
456.79 |
|
|
Sherwood G-2903X-J-W Engine Cooling Pump Painted
|
1361.48 |
|