FishTrax™ Strap Mount Attaches any FishTrax Fish Finder and transducer to a float tube, kayak or canoe.   Integrated adjustable strap with quick release buckle, allows for easy installation and removal. It can also be used to attach a GoPro Camera or any Camera with a female 1/4 x 20 thread pattern.  The strap mount is adjustable to 48" so it can also be mounted on kayaks and canoes as well.    Compatible with: FishTrax™ 1, 1X and 1C fish finders   In the Box: FishTrax Strap Mount TraxNut Display Mount Adjustable Strap (48') with Quick Release Buckle Transducer Mount Thumb Screw Hardware *Sold as an Individual 

FishTrax™ Transom Mount Transducer  The FishTrax transom mount transducer allows high-speed, on-plane operation of all FishTrax fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the box: Transom mount transducer w/30' cable  Transom mount bracket w/mounting hardware Instruction manual *Sold as an Individual 

FishTrax™ Transducer Mount The FishTrax transducer mount provides a universal transducer mounting option for sup's, paddleboards, kayaks canoes and small boats.   This solution enables the quick and effective mounting and removal of your transducer.  Compatible with: FishTrax 1 FishTrax 1X FishTrax 1C In the Box: ABS Plastic Transducer Mount Stainless Steel Bolt and Wing Nut Instruction manual  *Sold as an Individual

FishTrax™ Adjustable Mounting Bracket with Suction Cup Utilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surface on your kayak, small boat or canoe.  Combine it with a TraxMount Weighted Display Mount Pad or TraxMount Mounting Disk to maximize usability. Compatible with:  FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C *Sold as an Individual

FishTrax™ Display Mounting Disc The TraxMount Suction Cup Mounting Disk is an adhesive pad disc that allows you to stick it to any surface and attach any FishTrax or TraxMount accessory that incorporates a suction cup.   No tools are required to install - simply clean the surface and stick to the surface using the strong adhesive base.  Compatible with: TraxMount suction cup display mount FishTrax™ suction cup transducer mount FishTrax™ IceShack enclosure In the Box: Suction Cup Mounting Disk 3M® Adhesive Backing *Sold as an Individual

RAM Mount Strap Mount w/Arm & Round Base The RAM-B-108U consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base, double socket arm and 2.5" base that contains the universal AMPs hole pattern. The base will accomodate rails from 1.0" to a maximum of 2.1" in diameter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Rail Dimensions: 1.0" to a maximum of 2.1" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Included in Kit: (1) QTY 6" long metal strap (1) QTY 8" long metal strap (1) QTY 5.5" rubber strip that supports the metal straps to avoiding scratching or marking of the rail Mounting Instructions: To mount the base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108U is an alternative mounting base for Beechcraft airplanes with a "throw over yoke". Note: The "U" in the part number reflects product packaged in poly bag.

RAM Univeral Finger Grip Holder ATV/UTV Strap Mount Part #: RAM-B-149Z-2-UN4 Whether your UTV or ATV is bone stock or loaded with accessory racks and guards, the new RAM Strap Base lets you choose the best possible mounting location for almost anything. Designed for a clean installation, this base accommodates most common tubing sizes on UTV?s and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. With the ball base in place, you have the foundation for mounting everything from GPS, Cell Phones, Radios, or maybe the famous RAM self leveling drink cup holder. No matter what you choose to do with it, you'll wonder why your UTV or ATV didn?t come from the factory with this must-have product. Strap Dimensions: 1.57" (40mm) to a maximum of 3.15" (80mm) Universal Finger Grip™ Holder Description: The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns. This mount is designed to hold the following devices: Cell Phones 2-Way Radios GPS Devices Height Dimensions: Minimum with Top and Bottom Plates: 5.25" Maximum with Top and Bottom Plates: 6.0" The top and bottom plates can be removed for larger devices. Spine Plate Dimensions: 3" Width x 3" Height Using Short Arm Side Clamps: Maximum Depth: 0.75" Minimum Width: 1.25" Maximum Width: 3.0" Using Medium Arm Side Clamps: Maximum Depth: 1.25" Minimum Width: 1.5" Maximum Width: 3.5" Using Long Arm Side Clamps: Maximum Depth: 1.6" Minimum Width: 2.25" Maximum Width: 3.5" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Strap Mount w/Arm & Diamond Base Rail Accommodation Dimensions: Mount with Strap: 1.57" to a maximum of 3.15" Mount with U-Bolt: 0.50" to a maximum of 1.25" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM ATV/UTV Strap Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc Description: The RAM-B-149Z-2-GA41U consists of a steel strap base, u-bolt bases, double socket, diamond adapter base and high strength composite cradle. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes on UTV's, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. With the ball base in place, you have the foundation for mounting everything from GPS Devices, RAM Aqua Boxes, Spotlights and Radios. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Rail Accommodation Dimensions: Mount with Strap: 1.57" to a maximum of 3.15" Mount with U-Bolt: 0.50" to a maximum of 1.25" Compatible Devices: Garmin Astro 320 Garmin GPSMAP 62 Garmin GPSMAP 62s Garmin GPSMAP 62sc Garmin GPSMAP 62st Garmin GPSMAP 62stc Material: High Strength Composite

RAM Mount Strap Mount w/Short Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Strap Mount w/Long Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Strap Mount w/Short Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Strap Mount w/Long Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

FishTrax™ Standard Transducer Have you lost, or damaged your standard FishTrax™ transducer?  This kit will get you back on the water in no time.   Includes all standard hardware and is 100% compatible with all FishTrax™ Series fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: FishTrax™ transducer w/15' cable Velcro Cable Strap Rubber Float Stopper Closed-Cell Foam Float *Sold as an Individual

FishTrax™ Suction Cup Transducer Mounting Bracket The FishTrax™ Suction Cup Transducer Mount easily attaches the standard FishTrax™ transducer to any hull for optimal performance.  Click and go for easy installation and removal on any vessel.    *Transducer not included Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: Suction Cup with Lock Tab Stainless Steel Bolt & Thumb Nut Stainless Steel Lock Washers *Sold as an Individual