RAM Mount Strap Mount w/Arm & Diamond Base Rail Accommodation Dimensions: Mount with Strap: 1.57" to a maximum of 3.15" Mount with U-Bolt: 0.50" to a maximum of 1.25" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM 1" Diameter Ball Mount w/2 Diamond Bases The RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Strap Mount w/Short Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Strap Mount w/Long Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.35 lbs.

RAM Mount Strap Mount w/Arm & Round Base The RAM-B-108U consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base, double socket arm and 2.5" base that contains the universal AMPs hole pattern. The base will accomodate rails from 1.0" to a maximum of 2.1" in diameter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Rail Dimensions: 1.0" to a maximum of 2.1" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Included in Kit: (1) QTY 6" long metal strap (1) QTY 8" long metal strap (1) QTY 5.5" rubber strip that supports the metal straps to avoiding scratching or marking of the rail Mounting Instructions: To mount the base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108U is an alternative mounting base for Beechcraft airplanes with a "throw over yoke". Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Strap Mount w/Short Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Strap Mount w/Long Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM 1" Diameter Ball Double Socket Arm with Diamond Base Part #: RAM-B-103-238U The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

1" Ball Marine Electronics Mount with Diamond Base The RAM-B-107U-238 consists of a double socket arm, diamond base and connecting Humminbird/Apelco marine base. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. RAM 1" Ball Marine Electronic Mount with Diamond Base for the Humminbird 100-700 Series, Matrix Series and Lowrance Elite-5 Series. Features: Overall Height: 5" Weight Capacity: To 2.25kg approximately 5 lbs Ball Size: 1: Rubber "B" Ball Size Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product will be packaged in a poly bag Weight: 0.68 lbs

RAM-A-CAN™ II Universal Cup Holder Base with Double Ball Mount The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder base serves as a mounting point for the diamond base. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Specifications: Material: High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag

RAM Composite Double Socket Mount Short Arm & with 2/1" Ball Diamond Bases The RAP-B-102U-A consists of a short double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends. The hole pattern found on the diamond plate will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Composite Double Socket Mount with 2/1" Ball Diamond Bases The RAP-B-102U consists of a double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends. The hole pattern found on the diamond plate will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter Part #: RAM-B-121-238U Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.