Steering Trim Control Unit Trim Switches on the Steering Wheel Improve Safety and Performance.  This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel. Features: Puts trim switches on steering wheel for convenience and safety Allows driver to keep both hands on the steering wheel Mounts easily on steering wheel spokes Weatherproof rubber booted switches Rugged urethane coiled cord Can be used for trim control or jack plate control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Trim Control Push Button Trim Switch Transom Trim Control Switch/Hydraulic Jack Plate Switch Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions. Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint! As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power. The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power. Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to! This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels. Order the NXL-M4 for insane power out on the water! Features: Hardware resistant to corrosion and UV Protection Coated 4 Layers PCB to prevent corrosion IPX5 Water Resistance Grade High Level Input For Radio Use Front cover to keep the controls safe to the elements LED Clip Indicator to easier adjustment Stable and Reliable Class D Circuit Design Sound Quality Verification Using AP Instruments Direct Insert Power and Speaker Terminals Short Circuit, Thermal, and Voltage Protection Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz  2 Ohm RMS Power Per Channel - 4 x 230W  4 Ohm RMS Power Per Channel - 4 x 150W  4 Ohm RMS Power Bridge Channel - 2 x 440W  Signal-to-Noise Ratio - >90dB  Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7" *Sold as an Individual

Max Control Holding Tank Deodorant - 1-Gallon Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 4 ounces treats a 40 gallon holding tank Formaldehyde-Free Formula Easy to use. See-through window stripe and 8-oz. increment marks make measuring easy One (1) Gallon container New Item # 9108557756  *Sold by the Gallon WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Max Control Holding Tank Deodorant - 12 Pack of 1.5oz Pods Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 1 Ounce per 10 Gallons of Holding Tank Capacity Formaldehyde-Free Formula 100% biodegradable 12 Pack of 1.5oz. pods New Item # 9108844944  *Sold by the 12 Pack WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Power A MM12T - Electronic Control Package -Single Engine/Dual Station - Mechanical Throttle/Mechanical Shift Power A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines(SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays MM12T Package Includes: 42010R - (2) PA2-B1T - Single Lever Control w/Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3'

Max Control Holding Tank Deodorant - 32oz Bottle Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 4 ounces treats a 40 gallon holding tank Formaldehyde-Free Formula Easy to use. See-through window stripe and 8-oz. increment marks make measuring easy 32 oz. Container New Item # 9108557757  *Sold by the 32 oz. Container WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Max Control Holding Tank Deodorant - Four (4) Pack of 8oz Bottles Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 4 ounces treats a 40 gallon holding tank Formaldehyde-Free Formula Easy to use. See-through window stripe for measuring ease Eight (8) oz. Container New Item # 9108557759  *Sold by the four (4) Pack WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SP-80 Fixed-Mount Autopilot System Cruise Control at Sea. The SP-80 takes the helm and sets you free. For boater who know where they're going. SP-80 takes you where you want to be--effortlessly. It's smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to really let you go. Designed for inboard outboard and sterndrive vessels with either hydraulic or quadrant steering systems. Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface. Waterproof control head easily installs flush or surface mounted. System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit. Bold, backlit display with ten levels of brightness for clear reading in any light. Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status. Automatic Sea State and Trim controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering. Rudder feedback verifies autopilot's commands. Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure. Heading Output feature allows you to stabilize radar display. Built-in diagnostics and self tests, plus visual and audible alarms. Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations. Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position. Works with solenoid valves also. Old Part# SP-80RLP

Airboat Trim Tab Kits 12-Gauge Blades / 12-Volt Actuators Lenco Airboat Electric Trim Tab Kit was designed exclusively for airboats. Engineered with a short Extreme Duty Actuator and a unique mount that allows maximum plate movement and safe upward position when running in shallow water and on land. This system eliminates porposing and helps to create a smoother ride. Blade is 12 gauge - 304 SS with 5/8" flared trailing edge and 1" Custom Hinge with 1/8" diameter hinge pin. Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Kit Contents 1 each of 12-gauge 304 stainless steel trim tab plane 1 each of #15055-001 XD actuator with 6' lead and Deutsch plug 1 each of #30133-002 14' actuator extension wiring harness 1 each of #15085-001 (116) upper mounting bracket with gland seal 1 each of the Lenco owner's/installation manual All necessary stainless steel mounting hardware Specifications Trim Tab Kit: Airboat Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Made in: Stuart, Florida U.S.A. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Limited Space Trim Tab Kit- Standard Actuator  12-Volt Actuators Lenco Electric Limited Space Trim Tab Kits are engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. For boat lengths 14' to 25'.  Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible. Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" diameter hinge pin. Upper and lower high-impact corrosion-proof mounting brackets with mechanical cable gland seal.  Kit Contents 2 each of 11-gauge 304 stainless steel trim tab blades 2 each of #15054-001 Standard actuator with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting bracket with gland seal 1 each of the Lenco owner's / installation manual All necessary stainless steel mounting hardware Specifications Trim Tab Kit: Limited Space Blades: 11 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Made in: Stuart, Florida U.S.A. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SP-80 - Control Head Only For boaters who know where they're going. SP-80 takes you where you want to be--effortlessly. Its smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to go. Features: Designed for Outboard, Inboard, and Sterndrive vessels with Hydraulic or Mechanical steering systems. Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface. Waterproof control head easily installs flush or surface mounted. System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit. Bold, backlit display with ten levels of brightness for clear reading in any light. Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status. Automatic Sea State and Trim controls and 10 selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering. Rudder feedback verifies autopilot's commands. Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure. Heading Output feature allows you to stabilize radar display. Built-in diagnostics and self tests, plus visual and audible alarms. Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations. Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position. Works with solenoid valves also.

3 Circuit Engine Shutdown with Square Display   Designed for low-current, electronically controlled engines. Featuring sealed relays with gold-plated contacts and is guaranteed to operate in all electronic engine applications. Engine circuit relays feature an operating range of 10 µA to 2 amps. Auxiliary relays have an operating range of 100 mA to 10 amps for the shutdown of generators, dampers, louvers, and other types of related engine room equipment.  Features: 2-2A gold-plated relays Water-resistant display Includes 3 ft. cable Specifications: Relay Ratings (2A): 2 Relay Ratings (20A): 1 Helm Display: Square DU-SBH-20

Atlas Blinker Trim System - Dual Switch Trim Control for Hydraulic Helms. Features: Operates Engine Trim and/or Jack Plates Fits Hydraulic, Cable, and Tilt Steering Dual Switch Easy Installation

Atlas Blinker Trim System - Single Switch Trim Control for Hydraulic Helms. Features: Operates Engine Trim and/or Jack Plates Fits Hydraulic, Cable, and Tilt Steering Single Switch Easy Installation