Constant Torque Hinge Symmetric Forward Torque 0.9 N-m - Reverse Torque 0.9 N-m - Large Size - Stainless Steel 316 - Polished Southco’s line of Constant Torque Position Control Hinges provide constant resistance throughout the entire range of motion, enabling users to easily position doors, display screens, and other mounted components and hold them securely at any desired angle – fully opened, fully closed, or anywhere in between. Hinges are available in a wide variety of sizes, materials, and torque ranges to satisfy application needs across industries. Specifications: Material: 316 Stainless Steel Finish: Polished Color/Appearance: Polished Forward Torque (Nm): 0.90 Reverse Torque (Nm): 0.90 Access Restriction: No Restriction Torque Type: Symmetric Mounting Style: Screw Mount Installation: Rivet/Screw Series: 400 Series Size Series: Large Size Class: E6/ST - Constant Torque Position Control Hinges

SS175H-W/0 Stainless Steel Thru-Hull Transducer - 0° - 9-Pin The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths. Features: 130-210 kHz High CHIRP with wide 25° beam for excellent fish targets  Up to 310M (1000') range with High CHIRP 1 internal broadband ceramic Thru-hull with stainless steel housing Suitable for fiberglass and wood hulls Ideal for sportfishing and commercial vessels up to 8M (25') Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays

Oval Head SS Gunnel Mount Rod Holder - 0° - 9" Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8"

Round Head Closed Base Rod Holder - 0° - 9" Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting. Head Size: 3.85" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8"

Blind Mount Round Head Closed Base Rod Holder - 0° - 9" Eliminate fastening from the top of flange and enhance the look of your gunnel With drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.84" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8"

Oval Head Closed Base Rod Holder - 0° - 9" Heavy duty oval head closed end base, with drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8"

Replacement Vinyl Insert - 0° - 9" - Black Replacement vinyl insert for 9" rod holders

Replacement Vinyl Insert - 0° - 9" - White Replacement vinyl insert for 9" rod holders

G4 Back Pin 0.9" (23mm) LED Light" G4 utilizes High Power LEDs for more than enough light to read and work by. As with all our replacement bulbs the G4 includes a built in Buck Regulator, which produces little heat, making it the most robust on the market today. Compact size Long Life: Up to 50,000 Hours No Fire Hazard Like Halogens

G4 Back Pin 0.9" (23mm) LED Light" G4 utilizes High Power LEDs for more than enough light to read and work by. As with all our replacement bulbs the G4 includes a built in Buck Regulator, which produces little heat, making it the most robust on the market today. Compact size Long Life: Up to 50,000 Hours No Fire Hazard Like Halogens

Ampco Pumps P1SX015098006 17-4 Sleeve

Elite Screwless Stainless Steel 0° Rod & Cup Holder - Drain - Round Top *Must have access to underneath side of gunwale for installation* Features 316 Stainless with Round Top 0º Rod Angle 3/8" NPT Drain Fitting

Manufacturer Names that start with a number. Such as 303 Products and 3M Products

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials. Features Industry standard for low-profile transducers Depth and temperature Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz Right angle cable exit offers low headroom and protection when transducer is stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Housings are ABYC H-27 compliant Optional temperature sensor Bronze transducer housing Boat Size: 8M (25') and up Specifications: Weight: Bronze - 0.9 kg (2.0 lb) Hull Deadrise: Up to 8° Acoustic Window: Urethane Hole Diameter: 51mm (2") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.  Features: Depth only or depth and temperature 600 W Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700') Right-angle cable exit saves space and protects the transducer if stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Low-profile, bronze housing has minimal drag Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles Specifications: Weight: 0.9 kg (2.0 lb.) Recommended Boat Length: Up to 8 m (25') Hull Material: Fiberglass or wood Hull Deadrise: Best performance through 7°. Can accommodate up to 12°. Acoustic Window: Urethane Hole Diameter: 51 mm (2") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.