Two Zone Detection & Alarm Panel - 2-5/8" Display - 12/24V DC Each system consists of a monitor panel and up to 14 smoke or heat detectors and/or rate of rise heat detectors connected to each zone (sold separately.) Features: Visual and audible indications of a fire or fault Water resistant display Voltage and EMI protected Reverse polarity protected Specifications: Supply Voltage: 9-32V DC Zone Loop Voltage: 24V DC (regardless of input voltage) Minimum Alarm Current: 15mA Maximum Current Per Zone: 400mA Maximum Sensors Per Zone: 8 EOL Resistor: 5.6kΩ Potential Free Transistor Output (Fault, Alarm): 50V max Relay Output (Buzzer): 2A

8121 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats. Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 5.25" x 3" (190.5 x 133.35 x 76.2mm) In the Box: 8121 Panel Labels Mounting hardware *Sold as Individual 

8421 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - White Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats. Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 4.5" x 3.25" (190.5 x 133.35 x 76.2mm) In the Box: 8421 Panel Labels Mounting hardware *Sold as Individual

8521 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats. Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 4.5" x 3.25" (190.5 x 133.35 x 76.2mm) In the Box: 8521 Panel Labels Mounting hardware *Sold as Individual 

Propane Fume Detector & Alarm w/2 Plastic Sensors & Solenoid Valve - Square Black Bezel Display Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions. Features/Specifications: 2-5/8" Square Black Display with LEDs & Silence/Test Button Solenoid Valve & Adapter Solenoid Valve Control Button Automatically Closes Solenoid Valve 68 dBA Alarm will sound & Red LED will light at 20% of the LEL Simple Installation 9-30VDC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Reverse Polarity Protected Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA

Headhunter XRS-124 X-CAL 12/24V Pump X-Caliber – 12-24V DC Water Pressure Pump Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features. A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.   Part#Description   XRS-124X-Caliber 12-24 VDC Saltwater Pressure System   Control Panel: Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.   Advanced Features: Adjustable cut in pressure Adjustable power setting Operates on 12 or 24VDC Over voltage protection Under voltage protection Over current protection Anti-flooding protection Dry run protection Variable Speed Rotating bracket   Product Details/Specifications:   Liquid Temp 32°F (0°c)-104°F (40°c) Ambient Temp 32°F (0°c)-122°F (50°c) Max Pressure 67 PSI (4.5 bar) Max Flow 10 GPM (38 lpm) Suction/Discharge 3/4” FPT (Optional metric adapter) Weight 16lbs (7.2 kg) Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H      

CO Alarm 12/24V DC - White A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

CO Alarm 12/24V DC with Interconnect - Black   A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual 

CO Alarm 12/24V DC with Interconnect - Black   A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual 

3133 - SMS Panel Enclosure with Main & 3 Branch (12/24V) - 12/24V DC The 3133-panel enclosure for DC circuit breakers and other large frame devices. Features:  Blank apertures for custom breaker loading Glass-filled polycarbonate base Clear cover allows easy view of circuit breaker status Overlapping cover for strength and increased gasket protection Oversized, formed in place seamless PUR gasket Easily removable stainless steel hinge pin for unobstructed installation Stainless steel latch secures cover without penetrating the enclosure Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers Includes waterproof glands LED lights for backlighting and ON indication Technical Specifications: Circuit Breaker Type - 1 x 12/24V DC Main and 3 x Branch 12/24V DC (15A) Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm) Dimensions  (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm) LEDs Installed - 6 x Amber ON indicating 12/24V DC  In the Box: 3133 Enclosure Glands x 6 Labels Mounting hardware Instruction manual *Sold as an Individual

3134 - SMS Panel Enclosure with 4 Branch (12/24V) - 12/24V DC  The 3134-panel enclosure for DC circuit breakers and other large frame devices. Features:  Blank apertures for custom breaker loading Glass-filled polycarbonate base Clear cover allows easy view of circuit breaker status Overlapping cover for strength and increased gasket protection Oversized, formed in place seamless PUR gasket Easily removable stainless steel hinge pin for unobstructed installation Stainless steel latch secures cover without penetrating the enclosure Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers Includes waterproof glands LED lights for backlighting and ON indication Technical Specifications: Circuit Breaker Type - 4 x Branch 12/24V DC (15A) Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm) Dimensions  (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm) LEDs Installed - 6 x Amber ON indicating 12/24V DC  In the Box: 3134 Enclosure Glands x 6 Labels Mounting hardware Instruction manual *Sold as an Individual

3135 - SMS Panel Enclosure with UL Main & 3 Branch (12/24V) - 12/24V DC The 3135-panel enclosure for DC circuit breakers and other large frame devices. Features:  Blank apertures for custom breaker loading Glass-filled polycarbonate base Clear cover allows easy view of circuit breaker status Overlapping cover for strength and increased gasket protection Oversized, formed in place seamless PUR gasket Easily removable stainless steel hinge pin for unobstructed installation Stainless steel latch secures cover without penetrating the enclosure Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers Includes waterproof glands LED lights for backlighting and ON indication Technical Specifications: Circuit Breaker Type - 1 x UL 489 DC Main and 3 x Branch 12/24V DC (15A) Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm) Dimensions  (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm) LEDs Installed - 6 x Amber ON indicating 12/24V DC  In the Box: 3135 Enclosure Glands x 6 Labels Mounting hardware Instruction manual *Sold as an Individual

7" AcquaLink® Multifunction TFT Display - 12/24V - 800 x 480 Resolution - Black AcquaLink® multifunction TFT Displays are available in 4.3" and 7" sizes. The full 24 bit/16 m colors optically bonded displays feature transmissive layer technology for unprecedented and unsurpassed readability even in direct sunlight. The TFT Display shows a wide array of data received from the AcquaLink® NavBox or NMEA 2000®. Users can customize up to 40 different data pages with single, double, treble or quad grid layouts.  TFT Displays can be daisy-chained with other AcquaLink® gauges, displays or NavControls using the unique VDO Marine Bus or directly connected to the NMEA 2000® backbone (optional adapter cable required) for simple installation on any yacht.  7" TFTs are equipped with capacitive multi touch screens to slide between pages whereas 4.3" displays require the use of a NavControl unit for data input and operation.  Features: 1x plug with 2x Video Input 2x VDO Marine Bus connectors  Operating temperature range -20°C/+70°C  Protection level front and rear IPX9K with connectors plugged Includes:  TFT Display, Bezel, Silicone Cover, Mounting Screws, Drilling Template, Installation Instructions, Safety Instructions This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

CO Alarm 12/24V DC - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

7765 L-Series Solenoid Switch - 150A - 12/24V DC Ideal for switching DC subpanels, thrusters, windlass, inverters, and other medium-amp DC loads. Features: Continuous duty, SPST - Normally Open Hermetically sealed contacts Activated by a remote ON-OFF switch 8230 (sold separately) Coil control circuit minimizes heating and amperage draw