|
7765 L-Series Solenoid Switch - 150A - 12/24V DC
Ideal for switching DC subpanels, thrusters, windlass, inverters, and other medium-amp DC loads.
Features:
Continuous duty, SPST - Normally Open
Hermetically sealed contacts
Activated by a remote ON-OFF switch 8230 (sold separately)
Coil control circuit minimizes heating and amperage draw
|
157.20 |
|
|
7719 - ML-Series Solenoid Switch - Stripped Wire - 24V
For applications where sustained control signals are needed to emulate a normally open relay with a lower current draw.
Features:
Silver alloy contacts provide high reliability for switching live loads
LED output to remotely indicate switch state
3/8"- 16 tin-plated copper studs for maximum conductivity and corrosion resistance
One-piece stainless flange nuts for safe and secure connections
Label recesses for circuit identification
Technical Specifications:
Control Circuit Voltage - 20.2 to 32.9 V DC
Control Circuit Connection - Tinned wire
Nominal Voltage - 24V DC
Coil Function - Auto-releasing
Amperage Operating Current - OFF - 8mA and ON 13mA
Mechanical Endurance - 100,000 Cycles
Terminal Ring Diameter Clearance - 1.18" (30mm)
Terminal Stud Length - .875" (22mm)
Terminal Stud Size - 3/8" - 16 (M10)
In the Box:
7719 Solenoid
Contura Switch w/integrated LED
Instruction Manual
*Sold as an Individual
|
204.88 |
|
|
7719100 - ML-Series Solenoid Switch - Deutsch Connector - 24V
For applications where sustained control signals are needed to emulate a normally open relay with a lower current draw.
Features:
Silver alloy contacts provide high reliability for switching live loads
LED output to remotely indicate switch state
3/8"- 16 tin-plated copper studs for maximum conductivity and corrosion resistance
One-piece stainless flange nuts for safe and secure connections
Label recesses for circuit identification
Technical Specifications:
Control Circuit Voltage - 20.2 to 32.9 V DC
Control Circuit Connection - Deutsch DTM
Nominal Voltage - 24V DC
Coil Function - Auto-releasing
Amperage Operating Current - OFF - 8mA and ON 13mA
Mechanical Endurance - 100,000 Cycles
Terminal Ring Diameter Clearance - 1.18" (30mm)
Terminal Stud Length - .875" (22mm)
Terminal Stud Size - 3/8" - 16 (M10)
In the Box:
7719100 Solenoid
Contura Switch w/integrated LED
Instruction Manual
*Sold as an Individual
|
215.66 |
|
|
7718 - ML-Series Solenoid Switch - Stripped Wire - 12V
For applications where sustained control signals are needed to emulate a normally open relay with a lower current draw.
Features:
Silver alloy contacts provide high reliability for switching live loads
LED output to remotely indicate switch state
3/8"- 16 tin-plated copper studs for maximum conductivity and corrosion resistance
One-piece stainless flange nuts for safe and secure connections
Label recesses for circuit identification
Technical Specifications:
Control Circuit Voltage - 10.1 to 16.5 V DC
Control Circuit Connection - Tinned wire
Nominal Voltage - 12V DC
Coil Function - Auto-releasing
Amperage Operating Current - OFF - 8mA and ON 13mA
Mechanical Endurance - 100,000 Cycles
Terminal Ring Diameter Clearance - 1.18" (30mm)
Terminal Stud Length - .875" (22mm)
Terminal Stud Size - 3/8" - 16 (M10)
In the Box:
7718 Solenoid
Contura Switch w/integrated LED
Instruction Manual
*Sold as an Individual
|
204.88 |
|
|
7718100 - ML-Series Solenoid Switch - Deutsch Connector - 12V
For applications where sustained control signals are needed to emulate a normally open relay with a lower current draw.
Features:
Silver alloy contacts provide high reliability for switching live loads
LED output to remotely indicate switch state
3/8"- 16 tin-plated copper studs for maximum conductivity and corrosion resistance
One-piece stainless flange nuts for safe and secure connections
Label recesses for circuit identification
Technical Specifications:
Control Circuit Voltage - 10.1 to 16.5 V DC
Control Circuit Connection - Deutsch DTM
Nominal Voltage - 12V DC
Coil Function - Auto-releasing
Amperage Operating Current - OFF - 8mA and ON 13mA
Mechanical Endurance - 100,000 Cycles
Terminal Ring Diameter Clearance - 1.18" (30mm)
Terminal Stud Length - .875" (22mm)
Terminal Stud Size - 3/8" - 16 (M10)
In the Box:
7718100 Solenoid
Contura Switch w/integrated LED
Instruction Manual
*Sold as an Individual
|
215.66 |
|
|
Headhunter XRS-124 X-CAL 12/24V Pump
X-Caliber – 12-24V DC Water Pressure Pump
Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features.
A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.
Part#Description
XRS-124X-Caliber 12-24 VDC Saltwater Pressure System
Control Panel:
Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.
Advanced Features:
Adjustable cut in pressure
Adjustable power setting
Operates on 12 or 24VDC
Over voltage protection
Under voltage protection
Over current protection
Anti-flooding protection
Dry run protection
Variable Speed
Rotating bracket
Product Details/Specifications:
Liquid Temp
32°F (0°c)-104°F (40°c)
Ambient Temp
32°F (0°c)-122°F (50°c)
Max Pressure 67 PSI (4.5 bar)
Max Flow 10 GPM (38 lpm)
Suction/Discharge 3/4” FPT (Optional metric adapter)
Weight 16lbs (7.2 kg)
Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H
|
2422.73 |
|
|
8521 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black
Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats.
Features:
Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate
Designed for 12 or 24V DC systems
Watertight mounting gasket
ON indicating LEDs embedded in all switches
Technical Specifications:
Nominal Voltage - 12/24V DC
Operating Current - 18mA per switch
Switch Rating - 20A@12V and 15A@24V DC
USB - 12/24V Dual USB Charger 4.8A
Dimensions (H x W x D) - 7.5" x 4.5" x 3.25" (190.5 x 133.35 x 76.2mm)
In the Box:
8521 Panel
Labels
Mounting hardware
*Sold as Individual
|
194.87 |
|
|
7701
Manual Control: No
Coil Voltage: 12V DC
500 Ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs
Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state
Silver alloy contacts provides high reliability for switching live loads
Optional manual switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing
3/8" copper studs, using Blue Sea Systems superior one piece technology, suitable for 300 Amperes continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
182.11 |
|
|
8121 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black
Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats.
Features:
Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate
Designed for 12 or 24V DC systems
Watertight mounting gasket
ON indicating LEDs embedded in all switches
Technical Specifications:
Nominal Voltage - 12/24V DC
Operating Current - 18mA per switch
Switch Rating - 20A@12V and 15A@24V DC
USB - 12/24V Dual USB Charger 4.8A
Dimensions (H x W x D) - 7.5" x 5.25" x 3" (190.5 x 133.35 x 76.2mm)
In the Box:
8121 Panel
Labels
Mounting hardware
*Sold as Individual
|
174.47 |
|
|
8421 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - White
Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats.
Features:
Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate
Designed for 12 or 24V DC systems
Watertight mounting gasket
ON indicating LEDs embedded in all switches
Technical Specifications:
Nominal Voltage - 12/24V DC
Operating Current - 18mA per switch
Switch Rating - 20A@12V and 15A@24V DC
USB - 12/24V Dual USB Charger 4.8A
Dimensions (H x W x D) - 7.5" x 4.5" x 3.25" (190.5 x 133.35 x 76.2mm)
In the Box:
8421 Panel
Labels
Mounting hardware
*Sold as Individual
|
194.87 |
|
|
3133 - SMS Panel Enclosure with Main & 3 Branch (12/24V) - 12/24V DC
The 3133-panel enclosure for DC circuit breakers and other large frame devices.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x 12/24V DC Main and 3 x Branch 12/24V DC (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 6 x Amber ON indicating 12/24V DC
In the Box:
3133 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
301.14 |
|
|
3134 - SMS Panel Enclosure with 4 Branch (12/24V) - 12/24V DC
The 3134-panel enclosure for DC circuit breakers and other large frame devices.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 4 x Branch 12/24V DC (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 6 x Amber ON indicating 12/24V DC
In the Box:
3134 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
289.54 |
|
|
3135 - SMS Panel Enclosure with UL Main & 3 Branch (12/24V) - 12/24V DC
The 3135-panel enclosure for DC circuit breakers and other large frame devices.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x UL 489 DC Main and 3 x Branch 12/24V DC (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 6 x Amber ON indicating 12/24V DC
In the Box:
3135 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
323.18 |
|
|
9001e e-Series Battery Switch Selector
Features:
Make-before-break contact design allows switching between battery banks without power interruption
CE Marked
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface or rear panel mounting
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Tactile textures indicate knob position by feel only
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.28 |
|
|
9002e e-Series Battery Switch Selector with Alternator Field Disconnect
Features:
Switches isolated battery banks to all loads or combines battery banks to all loads
Includes AFD (Alternator Field Disconnect)
Make-before-break contact design allows switching between battery banks without power interruption
Ignition protected—safe for installation aboard gasoline powered boats
Case design allows surface or rear panel mounting
Includes:
AFD (Alternator Field Disconnect)
CE Marked
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface or rear panel mounting
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Tactile textures indicate knob position by feel only
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.72 |
|