|
Compact Bracket Mount LED Spreader Light - White
This compact spreader light features 3 each powerful 3W LEDs, comparable to a 75W halogen bulb. Durable Zytel housing is UV resistant and is sure to withstand the elements for many seasons. A stainless steel bracket allows you to direct the light where it is most needed.
Features:
White housing
12/24 Volt, 5 Watt
Polycarbonate Lens
610 Lumens
IP67
*The "P" within the part number indicates retail packaging
|
38.88 |
|
|
Bracket Mount LED Spreader Light - White
Scandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment.
Features:
An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most
Guaranteed against corrosion, discoloration, and water intrusion
Comparable to a 120-watt Halogen bulb.
12/24 volts (8-30 volts)
UV-resistant Zytel® Nylon Resin housing
Polycarbonate Lens
IP68
*The "P" within the part number indicates retail packaging
|
56.51 |
|
|
A3 Downlight - Surface/Flush Mount - Stainless Steel
This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).
Features:
316 stainless steel trim
6 x 0.5-watt warm white LED
242 Lumens
2.2 Watt
12 Volt
IP67
Applications:
A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel
Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture
*The "P" within the part number indicates retail packaging
|
23.09 |
|
|
High Intensity Outdoor Dimmable LED Spreader Light - White
Lunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern.
A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power."
Features:
IP67 rated
3 different mounting positions
1,100 lumens of light
White
|
111.95 |
|
|
Round Surface Mount L.E.D. Dome Light w/ On/Off Switch
(1356)
White Powder Coat
Clear Translucent Plastic Globe
12 Volt L.E.D.s Draw Less Than 10 Watts
Dimmer Capable L.E.D.s
Screw Size No. 8 R.H.
Depth Overall 1"
3 L.E.D.s
3 watt
|
112.60 |
|
|
2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0
Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 20W
Amp. Draw: 1.4
LED Quantity: 2
Weight: 0.7 lbs.
Raw Lumens: 1560
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”
Mounting Holes: 3-1/2” apart horizontally
In the Box:
2” marine white spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual
|
98.28 |
|
|
2" Marine Flush Mount LED Pod Light - Diffused Optics - White Housing - Pro Series 3.0
Extremely Versatile, the Marine Flush Mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything else users can mount this powerful 2x2 LED light on.
Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30+ types of harsh conditions. If users are looking at a reverse light or a light for their rear bumper, the Diffused option is the perfect setup, throwing light out in a 120° pattern! This flush-mount LED truck light puts out an unimaginable amount of light, considering its compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Diffused lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with diffused optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
139.50 |
|
|
4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0
With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 0.35 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”
Mounting Holes: 5-5/8” apart horizontally
In the Box:
4” marine white flush mount spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual
|
147.00 |
|
|
Pro Series 3.0 Double Row 30" LED Light Bar - Combo Optics - Black Housing
The 30'' Double Row Series is for users who want a painfully bright LED bar that won't break the bank. This light is perfect for mounting on a lower bumper, behind the grill, or across the top of an ATV and can throw a beam that will illuminate a whole air strip. Don't underestimate it's size.
At almost a meter long, Black Oak's 30" LED light bar has two rows of blindingly bright Osram 5W white LEDs (60 LEDs in total). Equipped with spot, flood and Combination beam pattern, this light bar will light up objects hundreds of yards ahead of a vehicle as well as objects in a vehicle’s blind spots with equal effectiveness, making it perfectly suited for every driving scenario.
In order to take all the punishment that an off-road outing can throw, this 30" LED light bar is made using the most durable materials and proven manufacturing processes available today. Through this painstaking construction, this light was able to achieve a security rating of IP69K as well as pass US military standards. Black Oak's 30-inch light bar is completely waterproof, corrosion-resistant, and has an average lifespan of 50,000 hours of continuous use.
All said, the 30" LED light bar is almost guaranteed to outlast the vehicle it is mounted on and is backed by Black Oak's limited lifetime warranty and money-back guarantee.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Premium Dupont powder-coating for the highest quality and most resistant finish
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Lens cover made of Lexan with a UV protectant
Activities & Uses:
Off-Road combo light
T-Top boat light
Behind the grill light bar
UTV trail riding
Grill guard truck lights
Technical Specifications:
Total Wattage: 300W
Amp. Draw: 12.7
LED Quantity: 60
Weight: 10.8 lbs.
Raw Lumens: 39,600
Warranty: Lifetime
IP Rating: IP69K
Connection: Deutsch connector
Dimensions with Mounting Bracket (Width x Height): 31.4" x 4.125"
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
12 gauge wire
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
789.60 |
|
|
2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
135.00 |
|
|
2" Flush Mount LED Pod Light - Diffused Optics - Black Housing - Pro Series 3.0
Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. If users are looking at a reverse light or a light for the rear bumper, the diffused option is the perfect set up, throwing light out in a 120° pattern! The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Diffused lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with diffused optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
135.00 |
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing - White
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
206.40 |
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/Red
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
226.80 |
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing- Full-Color
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
238.80 |
|
|
SR-L Series Marine Spreader Light - White Surface Mount - White Light with White Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
157.50 |
|