4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”  Mounting Holes: 5-5/8” apart horizontally In the Box: 4” marine white flush mount spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

4" Marine Flush Mount Spreader Light - Black Housing - Pro Series 3.0 With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”  Mounting Holes: 5-5/8” apart horizontally In the Box: 4” marine black flush mount spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

2" Marine Flush Mount Spreader Light - Black Housing - Pro Series 3.0 READY FOR ANYTHING! This 2-inch flush mount LED light bar is the perfect addition to any hardtop for the boater in need of deck lighting. The 2 inch black marine flush mount spreader light throws light at a 120 degree beam angle, giving users extremely widespread dispersion without a hot spot, and is perfect for area lighting when fishing at night or getting ready early in the morning. With the flick of a switch, users can see that this marine spreader light is built with quality parts. From the moment users put this Black Oak 2 Inch Black Marine Flush Mount Spreader Light in their hand, it becomes completely clear how this spreader light can take the beating Black Oak claims it can. This small light bar comes complete with a wiring pigtail and everything needed to mount and get going! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Golf cart lighting Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine black spreader light Wiring pigtail with deutsch connector  All hardware, ready to install! *Sold as an Individual

4" Marine Spreader Light - Flood Optics - White Housing - Pro Series 3.0 Black Oak 4" Marine Spreader Light Flood Scene - White Housing - Pro Series 3.0 Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness.  This version has a 120° throw, much wider than the 45° throw of Black Oak's standard flood version.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader light (bow/stern) Aft deck fishing lights    Foredeck lights Overheard lighting (marine/non-marine use) Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Width x Height): 5" x 2.13" x 2.15”  In the Box: Marine spreader light (1) Wiring pigtail with 2-pin waterproof deutsch connector  Mounting hardware required to install *Sold as an Individual

4" Marine Spreader Light - Scene Optics - White Housing - Pro Series 3.0 Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader light (bow/stern) Aft deck fishing lights    Foredeck lights Overheard lighting (marine/non-marine use) Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Width x Height): 5" x 2.13" x 2.15” In the Box: Marine spreader light (1) Wiring pigtail with 2-pin waterproof deutsch connector  Mounting hardware required to install *Sold as an Individual

2" Marine Spreader Light - Scene Optics - White Housing - Pro Series 3.0 READY FOR ANYTHING! This 2-inch marine LED scene spreader light is the perfect way to add lights to a vessel. The 2'' Single Row Scene Light throws light at a 120-degree beam angle, giving users extremely widespread dispersion without a hot spot, and is perfect for area lighting when boating or fishing at night. Whether users are tying knots, catching fish, or cleaning the boat, they will have all the light that is needed. With the flick of a switch, users can see that this vehicle work light is built with quality parts. From the moment users put the 2-inch LED light bar Single Row series in their hands, it becomes completely clear how this vehicle work light can take the beating Black Oak's claim it can. This small light bar comes complete with a wiring pigtail, stainless steel brackets, and hardware—everything needed to mount and get going! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Golf cart lighting Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Width x Height x Depth): 2.82" x 1.91" x 2.18” In the Box: 2" marine spreader light (1) Wiring pigtail with deutsch connector  All hardware, ready to install! *Sold as an Individual

2" LED Pod Light - Diffused Optics - Black Housing - Pro Series 3.0 The Diffused Cree LED Light POD by Black Oak LED Offers maximum power using Cree's 10 watt XM-L2 LEDs at an incredible 120 degree beam angle! The truck POD light delivers extreme IP69K durability to match such high performing LEDs allowing users to have the confidence their lights are going to perform when needed.  Cree and Osram are the biggest names on the LED market for a reason. They put out more light and more power at such an extreme level. Users won't believe that much light came from an LED so tiny. This 2-inch LED lights mount virtually anywhere and with all the hardware needed in box, this light is ready to go. Black Oak's 40w Cree POD lights are the perfect Jeep JK windshield lights, and Black Oak created a sick light kit for the off-roading adventures. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Diffused lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Rear bumper lights Deck or spreader lights Bed lights for loading and unloading Site or area lighting Hunting stand or decoy setup Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with diffused optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" LED Light Pod - Scene Optics - Black Housing - Pro Series 3.0 This 2-inch LED POD uses 10-watt Cree XM-L2 LEDs, making it one of the highest performers in its class. The Scene LED POD light for trucks delivers extreme IP69K durability to match its high performing LEDs, giving users confidence that their lights are going to perform when needed. The Scene Light Pod throws light at a 120-degree beam angle, giving users extremely widespread dispersion without a hot spot. This 2-inch LED POD mounts virtually anywhere, and with all the hardware needed in the box, this LED work light is ready to go. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Area light for agricultural equipment Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.80" x 3.20" In the Box: 2" scene LED light pod Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0 The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed. Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Auxiliary motorcycle lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" LED Pod Light - Spot Optics - Black Housing - Pro Series 3.0 This Cree spot light pod by Black Oak LED offers 40 watts of total power. Also, this CREE LED spotlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed. Cree and Osram are the biggest names on the LED market for a reason. The Cree spot lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, these CREE LED spotlights are ready to go. This 40w Cree POD light is the perfect Jeep JK windshield lights, and Black Oak created a sick light kit for your off-roading adventures (sold separately). Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spot lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on duck boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Auxiliary motorcycle lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with spot optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

SCM-SL Series Flush Mount Spreader Light - White Housing - White The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Flush Mount Spreader Light - White Housing- Full-Color The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/Red The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Curved Double Row Combo Green Hog Hunting 20" Pro Series 3.0 LED Light Bar The 20" Curved Double Row Series Green LED has all the same durable and premium features as the 20" Double Row Series bar lights.  However, instead of a White LED this light bar has been outfitted as a hunting LED light bar with Green LEDs, not a Green filter as some other lights have. Black Oak Hog Hunting lights create the perfect color light for feral hog hunting, balancing intensity and brightness for you to see hogs before they can see you.  By utilizing high-intensity colored LEDs, this light bar is perfect for your ATV, UTV, or truck during hunting season. The colored LEDs allow you to run almost undetectable when hunting.  Features: Helps cut through fog and brush Optimal for brighter nights Doesn't reflect off the surroundings Technical Specifications: Total Wattage - 120W Amp. Draw - 8.1 Amp Raw Lumens - 12,440 Connection - Deutsch connector Dimensions (without mounting bracket) (Width x Height) - 20.75" x 3.3"  Weight - 7.6 Lbs In the Box: Light bar Mounting brackets 12' Wiring harness with an in-line fuse, relay, and Red on/off rocker switch *Sold as an Individual