MP Pumps 38038 ADAPTER - FM15 SS

Series 110 MP Pump 23922 Bronze Pump with Cast Iron Pedestal Mount MP Pump 1-1/2" x 1-1/4" End Suction Centrifugal Pump   The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron or bronze construction to suit a wide variety of liquids.   All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.   Suction And Discharge 1-1/2" x 1-1/4" NPT Materials Of Construction Pump Bronze with Cast Iron Pedestal Flow Up to 130 GPM Head Feet Up to 60' Impeller 4" semi-open Motor Up to 2 HP, Motor not included Drive Options Close coupled 56C, Close coupled 145TC, Max Solid Size .32"   APPLICATIONS: Agricultural, Commercial, Industrial, OEM

MP Pumps 21383 FM 15 BRONZE PUMP MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   3" X 3" NPT Ports Capacity up to 320 GPM Total Head up to 145 feet Bronze construction 5.75 inch diameter impeller

Get 10% OFF an N76-46P Pump Body Today!   Flotec N76-46P Pump Body   This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass. The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.  For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN. N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN   Get Your Coupon Code Today!

MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part #: MP21381 Size: 3 in. NPT Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine OEM  

MP Pump 24832 Cast Iron Pump MP Pumps 24832, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: CCMTR 1.13 6.0     SUCTION AND DISCHARGE3" x 3" NPT APPLICATIONAgricultural, Industrial, Marine, OEM MATERIALS OF CONSTRUCTION316 stainless steel, Bronze, Cast iron FLOWUp to 320 GPM HEAD FEETUp to 145' IMPELLER6.0" max. diameter, semi-open   MOTORUp to 7.5 HP

MP Pumps 21353 Flomax 10 Self Priming Centrifugal Pump  Bronze, Pedestal, 6.0" Impeller, 2" x 2"   FLOMAX 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line. A FLOMAX 10 PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 182TC and 184TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift  

MP Pumps 21339 Flomax 8 Self Priming Centrifugal Pump FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 8 Part # MP 21339 Configuration: Pedestal Mount Port Size: 2 in. NPT Flow-Rate: 150 GPM Head Feet: 100   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial   Marine    

MP Pumps 21327 Flomax 8 Self Priming Centrifugal Pump FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX PumPAK® is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 8 part # MP 21327 Port Size: 2 in NPT Flow-Rate: 150 GPM Head Feet: 100     Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine  

Jabsco  1" Bronze Pump 2/3 Cam   FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS MARINE- Pump bilge, Washdowns, Circulating water in bait tanks, Utility dock-side pump, Engine cooling.     INDUSTRIAL- Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Dilute acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING- Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE- Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   Jabsco Flexible Impeller Pedestal Pump 1"NPT 1/2 Cam Face Seal Neoprene Impeller

MP Pumps 21354, FLOMAX 10 Self Priming Centrifugal Pump End Only 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: PEM 6.0  

MP Pumps 21384 PUMP FM15 CI 1 1/8 MTR MNT

MP Pump 21365 PUMP FM10 BRZ 1 1/8 MTR MNT MP Pump 21365, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK B: CCMTR 1.13 5.75

MP Pump 21362 Pump FM10 Bronze Ped MP Pumps 21326 FLOMAX 8 Self Priming Centrifugal Pump End Only 2" X 2" NPT Ports Capacity up to 150 GPM Total Head up to 100 feet FM8PPK B: PEM 3/4 5.0

MP Pumps FM15-AB-SK SERVICE KIT This kit contains the following items   22358 1 Flange Gasket 23040 1 Flapper Valve 37138 1 O'Ring Viton 29715 1 Adapter O'Ring Viton 22240 1 Gasket 22361 1 Shaft Seal 23385 1 Impeller This kit is put together at time of order.