MP Pumps 26223 PMP FM5 BRZ 5/8"MTR MT ADAP

MP Pump 25984 Pump Fm8 Brz 5/8" Mtr Mt MP Pumps 25984, FLOMAX 8 Self Priming Centrifugal Pump End Only, 2" X 2" NPT Ports, Capacity up to 150 GPM, Total Head up to 100 feet. FM8PPK B: CCMTR 5/8 FA 5.0  

MP Pumps 21384 PUMP FM15 CI 1 1/8 MTR MNT

MP Pumps 21354, FLOMAX 10 Self Priming Centrifugal Pump End Only 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: PEM 6.0  

MP Pump 38522 Hhlf2Hoppk Brz 1.38 215Tc

MP Pumps FM10-AB-SK SERVICE KIT This kit contains the following items 22358 1 Flange Gasket 22240 1 Gasket 37138 1 O'Ring Viton 29715 1 Adapter O'Ring Viton 23040 1 Flapper Valve 22361 1 Shaft Seal 23385 1 Impeller This kit is put together at time of order.

MP Pumps 21366 PUMP FM10 C/I 184TC MT Flomax 10 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Cast iron construction and will fit 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.   Specifications Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.   Pump water end only less motors. Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 184C/145TC NEMA motors with feet.

MP Pumps 36083 High Head PumpPak All Bronze 1-1/2" NPT    MP Pumps High Head PumpPak Bronze for "C" Face Electric Motor 1-1/2" NPT (Less Motor) # 36083. They are shipped with 6.5" maximum diameter impellers for trimming to pumping condition by customer, Bronze construction and will fit Standard NEMA "C" face motors or 184TC NEMA motors.   Rated Capacity 140 GPM Maximum Head: 190 feet (82 PSI) Suction & Discharge Connections: 1-1/2" X 1-1/2" NPT  Impeller Diameter: 6.5" maximum diameter impeller.  Construction: Bronze housing and impeller; Seals - standard carbon,  ceramic, viton elastometers, drive sleeve - 304 stainless steel.   

MP Pump 21365 PUMP FM10 BRZ 1 1/8 MTR MNT MP Pump 21365, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK B: CCMTR 1.13 5.75

MP Pumps 21338 PUMP FM8 BRZ PED MNT   MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 21338. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all bronze construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.   Specifications Rated Capacity 140 GPM Maximum Discharge Head 92 feet (40 PSI) Suction & Discharge Connections 2" X 2" FNPT   Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight 49 lbs. 304 stainless steel stub shaft viton mechanical seal.    

MP Pumps 25922 PUMP FM8 C/I 7/8" MTR MT

MP Pumps 22347 ADAPTOR BRZ

MP Pumps 21383 FM 15 BRONZE PUMP MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   3" X 3" NPT Ports Capacity up to 320 GPM Total Head up to 145 feet Bronze construction 5.75 inch diameter impeller

MP Pumps 23037 IMPELLER BRZ

MP Pump 22470 3" Brz Discharge Flange