|
Automotive/RV Equipment and Supplies
If you plan on taking the RV out for a weekend, a week, or an even longer trip, we have the RV equipment you need. Along with that we also have standard automotive equipment, so we can help you get ready for your trip, enjoy it, and stay safe even if you just take your car for a getaway. With the parts and supplies you need, like CB radios, power inverters, and vehicle laptop mounts, you will be prepared for the things that might come your way on the trip. Traveling in an RV or by car can be great fun, and give you the chance to see a lot of the country. The right supplies make it more enjoyable.
We offer a wide variety of accessories, so you can browse through satellite receivers, charger/inverter combos, fume detectors, and more. If you want to make sure you are headed in the right direction we offer compasses - magnetic, and you can get GPS - accessories and GPS - automotive/RV options that will work no matter what kind of vehicle you have. Plenty of choices means you can select what fits your budget and needs, and then head out down the road to the adventure you have planned.
Notice: Safe-T-Alert Fume Detectors, all products are on backorder.
|
|
|
|
|
|
Battery Charger
Attwood's Battery Charger is compact and perfect for your bench, garage or shop use. Overcharge, short circuit and reverse polarity protection provides years of worry free use. Provides 2 and 6 amp charge for 12V batteries. 6 amp charge for 6V batteries. Automatically switches to trickle charge mode after battery is fully charged. Dual rated 12 and 6 volt battery charger can be used for all of your marine, automotive, RV and sports applications.
LED indicator - power on
Ammeter indicates charging current
6 foot power cord length
48 inch battery connector leads
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.70 |
|
|
SHURflo RV-10UC-A, Filter Housing
SHURflo Filter Housing Waterguard, Non-Bypass Model, 10 Inch, 3/4" FPT Ports, Includes One RV-10C1-A Cartiridge, Garden Hose Fittings, Wrench and Mounting Bracket
|
102.40 |
|
|
Jabsco 56509-0010 End Cover 50 Size Ultima
|
1737.41 |
|
|
BERKELEY S15094, SET OF PACKING RINGS
|
258.44 |
|
|
Jabsco 54509-0000 End Cover Hp5
|
1421.52 |
|
|
Ampco Pumps P1SX015098006 17-4 Sleeve
|
42.53 |
|
|
MP Pump 35098 Cent Pump SS 24V
|
406.58 |
|
|
Turning Point Hub Kit: 509
Features
Lifetime Warranty
Never buy another hub kit system again
Inner splines adapt to the engine
Outer hub compatible with different props
Reduce gear shock & engine/drive damage
Save up to 30% when purchasing a replacement prop
Eliminate propeller vibration & chatter
Eliminate hub cracking & failure
Corrosion resistant materials - brass splines
Reduce gear shock & engine/drive damage
Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.39 |
|
|
Haight Pump 30U-VMS Pump Vit Mech Sl No Rv
Features
Pump Body: Ductile Iron
Impeller: Steel Shaft
Seal: Viton Mechanical Seal
Inlet Port is 3/4 inch NPT
Discharge Port is 3/4 inch NPT
Haight 3U-VMS is a Ductile Iron Gear Pump, round hub Pump End Only less motor, 3 GPM rated, with Ductile Iron Construction, Viton Mechanical Seal, Steel Shaft, Steel Gears, Iron Rotor and Bearings. The standard construction materials of this pump are Ductile Iron Housing, Steel Shaft and Pinion Gears, Iron Rotor and Bearings, Buna N Lip Seals and Elastomers. These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.
Applications
Petroleum Products
Machine Manufacturing Applications
Machine Tools
Hydraulic Equipment
Lubrication Systems
Glue and Ink
Soap and Detergent Products
Building and Highway Contractors
Paper Products Industries
Automotive Applications
Shipbuilding Applications
Aircraft Applications
Mining Applications
|
1442.40 |
|
|
Haight Pump 54UR-VMS Pump Vit Mech Sl Rv
Specifications
Construction Material: Ductile Iron
Capacity (max): 54 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees FT
Inlet Port is 2 inch NPT and 2 inch ANSI Flange
Discharge Port is 2 inch NPT and 2 inch ANSI Flange
Seal: Viton Mechanical Seal
Pump End Only less motor
54U - DIU Series Double Positive Displacement Pumps
These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.
Applications
Petroleum Products
Machine Manufacturing Applications
Machine Tools
Hydraulic Equipment
Lubrication Systems
Diesel Engines
Food Processing
Restaurant Equipment
Misc. Chemical Applications
Glue and Ink
Soap and Detergent Products
Building and Highway Contractors
Paper Products Industries
Automotive Applications
Shipbuilding Applications
|
4170.12 |
|
|
Haight Pump 54U-VMS Pump Vit Mech Sl No Rv
Specifications
Construction Material: Ductile Iron
Capacity (max): 54 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees FT
Inlet Port is 2 inch NPT and 2 inch ANSI Flange
Discharge Port is 2 inch NPT and 2 inch ANSI Flange
Seal: Viton Mechanical Seal
Pump End Only less motor
54U - DIU Series Double Positive Displacement Pumps
These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.
Applications
Petroleum Products
Machine Manufacturing Applications
Machine Tools
Hydraulic Equipment
Lubrication Systems
Diesel Engines
Food Processing
Restaurant Equipment
Misc. Chemical Applications
Glue and Ink
Soap and Detergent Products
Building and Highway Contractors
Paper Products Industries
Automotive Applications
Shipbuilding Applications
|
3528.81 |
|
|
Haight Pump 80U 80 Pump Vit Lip Sl No Rv
Specifications
Construction Material: Ductile Iron
Capacity (max): 80 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
Inlet Port 2 inch NPT and 2 inch ANSI Flange
Discharge Port 2 inch NPT and 2 inch ANSI Flange
Pump End Only less motor
80U - DIU Series Double Positive Displacement Pumps
Compact, rugged and simple, these internal gear pumps are ideally suited for close-coupled mounting, which eliminates the need for expensive gear boxes, and prevents coupling alignment problems.
Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.
Applications
Petroleum Products
Machine Manufacturing Applications
Machine Tools
Hydraulic Equipment
Lubrication Systems
Diesel Engines
Misc. Chemical Applications
Glue and Ink
Soap and Detergent Products
Building and Highway Contractors
Paper Products Industries
Automotive Applications
Shipbuilding Applications
|
3783.87 |
|
|
Automotive Leather 3-In-1 Complete Care - 16oz
303 Automotive Leather 3-in-1 Complete Care cleans, conditions and provides UV protection to all finished leather and vinyl. It will help clean up surface dirt and grime, as well as helps repel future dust, lint and stains.
Also contains superior UV protection to prevent fading and cracking of the leather caused by the sun’s harmful UV rays. Easy to use formula, just spray on and wipe off.
Features:
No residue left behind
Repels dust, lint & stains
Conditions leather surface to prevent cracking & fading
Provides UV protection for all finished automotive leather & vinyl
Safe for use on all finished car leather & vinyl surfaces
Made in the U.S.A.
*Sold as an Individual
WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
7.69 |
|