Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and Chartplotters The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 15.2" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

RAM® X-Grip® Phone Mount with RAM® Tough-Strap™ Handlebar Base The RAM® Tough-Strap™ is the lowest-profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included standard size RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on and off the road. Features: Low profile handlebar mount for standard size phones includes the new RAM® Tough-Strap™ and RAM® X-Grip®, easily attaching to your handlebar with the turn of a single knob; includes two different strap sizes for handlebars ranging from 0.875"-1", 1"-1.25" and 1.25"-1.38" Ideal handlebar phone mount for all bike types, including mountain bikes, road bikes, and e-bikes Spring-loaded 'X' design for standard size phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; check compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: (1) X-Grip Phone Holder (1) #10-24 x 1" Machine Screw (1) #10-24 Nylock Nut Pin-Lock Base (1) Straight Rubber Spacer (1) Angled Rubber Spacer (2) Cable Ties (1) Rubber Adhesive Pad (1) Glue For Caps (1) Tether Specifications: Holder Dimensions: Width Range: 1.875" - 3.25", Depth Range: .875" Max Clamp Range: 0.875" - 1.38" Materials: High strength composite Weight: 0.37lbs

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy to reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.  PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures reliability and longevity of your marine electronics. PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution.  RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. PedestalPods are waterproof housings for marine electronics specifically designed for bass boats. PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your marine electronics from the harshest of wet boating conditions. PedestalPods provide the convenience of height for accessibility and added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20” off the deck and located near the bow and at a 45-degree angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. They keep harsh spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PedestalPod. The heavy duty, black powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look. It provides protection for wires and connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PedestalPods are available pre-cut for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. Constructed out of durable ABS like all Gen3 NavPods, black carbon PedestalPods have the same high gloss finish with UV stability. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PedestalPods – Protection, Convenience, Security

Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. T-Bolt Dimensions: .48" x .95" Material: High Strength Composite and Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: Part number reflects product packaged in a retail bag store shelf display.

Tab-Tite™ Cradle for 8" Tablets - Samsung Galaxy Tab 4 8.0 & Tab E 8.0 The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 8.0, Tab S 8.4, Tab E 8.0 and Tab A 8.0 (2017). The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Length: 8.08" to 10.69" Width: 3.77" to 4.96" Depth: 0.13" to 0.36" Features: 1. Support cups are designed to offer access to ports and tablet functions 2. Modular design makes upgrading to a new tablet simple and cost effective 3. Dual-spring loaded tension provides secure support for your tablet 4. Easy, quick release of your tablet for on-the-go applications 5. Versatility of cradle allows for attachment to many RAM mounting solutions 6. Lifetime warranty 7. Made in U.S.A. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.5 lbs.

RAM Transducer Arm Mount with Open Single Socket: Compatible with all RAM 1" Ball Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to a 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer. Compatible Transducers: The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw. Features: 1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location 2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm 3. Quality materials prevent corrosion and keeps your transducer arm mount 4. Lifetime warranty Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. This transducer mount enables quick, effective deployment and retrieval of your Lowrance StructureScan LSS transducer, while protecting it from damage. Perfect for kayak applications, the included rigid mounting arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the transducer mount can quickly be moved to a different kayak with an existing 1" RAM ball. Add a RAM ball mount for the Lowrance HDS-7 Fishfinder, and you have a complete mounting solution for your next fishing adventure. Compatible Transducers: Lowrance StructureScan LSS-2 Lowrance StructureScan LSS-1 Features: 18" rigid aluminum rod can be bent to position your transducer to its optimum location Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm High quality materials prevent corrosion Compatible with the Yakattack 1" screw ball Lifetime warranty Made in U.S.A. Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats.  Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy-to-reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures the reliability and longevity of your marine electronics. The PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution. RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9”, and 12” LCD displays from all major marine electronic manufacturers. PedestalPods – Protection, Convenience, Security.

Dashboard Mount with Backing Plate for 7"-8" Tablets with Cases The RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter. The RAM® Tab-Tite™ spring-loaded, quick-release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. The included 2.10" x 2.60" steel backing plate with #8-32 threaded holes attaches to a variety of RAM® Mounts ball bases. Features: The spring-loaded holder secures 7 in. -8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 8.32" - 10.92", Width Range: 4.43" - 5.3", Depth Range: .13" - .62" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum, high-strength composite, powder-coated steel Weight: 1.98 lb. Compatible Devices: Samsung: Galaxy Tab 4 8.0 with Otterbox Defender Case, Galaxy Tab A 8.0 (2017) with Case, Galaxy Tab A 8.0 (2018) with Case, Galaxy Tab A 8.0 (2019) with Case, Galaxy Tab S 8.4 with Otterbox Defender Case, Galaxy Tab E 8.0 with Verizon Rugged Case, and Galaxy Tab Active2

RAM Transducer Arm Mount with Male Wedge Base and 1" Ball: Compatible with Hobie and Scotty Wedge Hole Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to an existing flush mount or 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer. Compatible Transducers: The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw. Features: 1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location 2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm 3. Quality materials prevent corrosion and keeps your transducer arm mount 4. Compatible with Hobie and Scotty wedge bases 5. Lifetime warranty Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300c The RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. This mount is compatible with the following electronic devices: Garmin echo 100 Garmin echo 150 Garmin echo 300c Ball Size: 1" Rubber "B" Ball Size Material: Powder Coated Marine Grade Aluminum Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM® Drill-Down Heavy Duty Mount for weBoost This weBoost mounting kit includes a 3/8"-24 X .375" threaded RAM® Tough-Ball™ that screws directly into the weBoost antenna, a C size medium length socket arm, and a C size RAM® Diamond Ball base for flat surface drill-down mounting such as a rear bumper, spare tire carrier, or antenna bracket. The adjustability of the RAM® Mounts system allows you to collapse the antenna while not in use, as well as extend the reach of the weBoost antenna is mounted in a tight space. This weBoost antenna mount is compatible with all weBoost vehicle antennas including the Drive Reach OTR, RV, and Drive X RV antennas making this the ideal mounting solution for off-road vehicles and semi-trucks.  Features: Kit includes 3/8"-24 X .375" Threaded RAM® Tough-Ball™ that screws into thread adapter of the weBoost antenna, C size medium length socket arm, and C size RAM® Diamond Ball base for flat surface drill-down mounting such as a rear bumper, spare tire carrier, or antenna brackets The adjustability of the ball and socket technology allows the weBoost mount to collapse when not in use, and provide extended reach in tight mounting areas Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: HOLE PATTERN: 2-Hole AMPS 1.912" THREAD PITCH: 3/8"-24 X .375" PLATE SIZE: 2.43" x 1.31" BALL/SOCKET SIZE: C Size (1.5") WEIGHT CAPACITY: Standard Use: 4 lbs, Heavy-Duty Use: 3 lbs MATERIALS: Marine-grade aluminum, High strength composite

RAM® 100x100mm VESA Plate with Ball The RAM-E-246U consists of a 3.38" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. This product includes a set of washers intended to reduce the hole sizes in the VESA plate.  Features: Hardware Included: (4) .312" x .187" Shoulder Washers Ball Size: E Size (3.35") Weight Capacity: Standard Use: 15lbs/Heavy-Duty Use: 10lbs Materials: Marine-grade aluminum Weight: 1.94lbs

1.5" Double Ball Mount with Hardware for Garmin Striker + More The RAM-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. This mount is compatible with the following Garmin devices:  Striker 4 Striker 4dv Striker Plus 4cv echo 100 echo 150 echo 300c ECHOMAP Plus 42cv ECHOMAP Plus 43cv ECHOMAP Plus 44cv ECHOMAP Plus 45cv Ball Size: 1.5" Rubber Ball Size Material:  Powder Coated Marine Grade Aluminum Product Dimensions Overall Height: 5" Socket-To-Socket Length 3" Hole Pattern 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Note: Part number reflects product packaged in clear clam shell for store shelf display.