Lenco Automatic Trim Tab Control System   A real automatic boat control/trim tab control system that actually works - completely and automatically!  The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again.  The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set-up process after the installation of your Auto Glide system.              Closeouts     Rebates    Remanufactured    Specials

Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

15' 8 Pin ECU Display Cable for Passport I/O Display This display cable is an 8-conductor, shielded cable with reversed RJ-45 modular plugs on each end.   This cable is compatible with Dometic 8-Pin Controls. Legacy # 222103008 Features: 15' in length RJ-45 Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

20' 8 Pin ECU Display Cable for Passport I/O Display This display cable is an 8-conductor, shielded cable with reversed RJ-45 modular plugs on each end.   This cable is compatible with Dometic 8-Pin Controls. Legacy # 222103009 Features: 20' in length RJ-45 Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

30' 8 Pin ECU Display Cable for Passport I/O Display This display cable is an 8-conductor, shielded cable with reversed RJ-45 modular plugs on each end.   This cable is compatible with Dometic 8-Pin Controls. Legacy # 222103010 Features: 30' in length RJ-45 Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

35' 8 Pin ECU Display Cable for Passport I/O Display This display cable is an 8-conductor, shielded cable with reversed RJ-45 modular plugs on each end.   This cable is compatible with Dometic 8-Pin Controls. Legacy # 222103040 Features: 35' in length RJ-45 Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

50' 8 Pin ECU Display Cable for Passport I/O Display This display cable is an 8-conductor, shielded cable with reversed RJ-45 modular plugs on each end.   This cable is compatible with Dometic 8-Pin Controls. Legacy # 222103100 Features: 50' in length RJ-45 Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Shurflo 8020-513-236 Pump 115V 60Sw Pvs Shurflo- Diaphragm Pump 3 Chamber, 1.5 GPM Open Flow, 115VAC Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), Viton Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, Has a Power Cord, UL/CSA Recognized, General Industrial Pump