Jabsco 53041-2003-230 Pump 230V 50Hz Heavy Duty Utility 1" Self-Priming Flexible Impeller Pump 230 volt, single phase, 50Hz IP54 Electric Motor, Nitrile oil-resistant impeller   Connections: 1” BSP internal threaded ports Output: up to 9.5 GPM Built-in dry-running protection for up to 30 minutes after initial prime Rapid self-priming from dry up to 2m Will handle hard or soft solids Corrosion resistant bronze body, stainless steel shaft Carbon-ceramic mechanical shaft seal Simple, fully serviceable design with few wearing parts Continuously rated motor

Jabsco 30510-2003 Pump Wet End Only Pump Body: 316 Stainless Head with Bracket wet end only Port Size: 3/4" NPT Internal Flow: Nominal 10.1 US gallons/min at 1750rpm Pressure: Pressure up to 1.5 bar Impeller: Nitrile Shaft Seal: Mechanical; Carbon Shaft: 316 Stainless Steel   Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft). INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerin, brine, etc. PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump. PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries. FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders. AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.  

Jabsco 53081-2003-230 Pump 1.5 230V Util 80

Jabsco Bronze Imp Pump Head Only Kit Flanged FEATURES Pump Body: Bronze Head Kit with Motor Adaptor Port Size: Flanged Flow: up to 200 litres/minute @ 1500 RPM Impeller: Neoprene or Nitrile Shaft Seal: Carbon/Ceramic mechanical seal, Nitrile. Shaft: Stainless steel shaft extension Motor Bracket: Epoxy-coated aluminium, suitable for B3/B14 D100 frame motor to IEC 71 standard     APPLICATIONS / CHARACTERISTICS Self primes from dry up to 3.0 metres. Handles hard or soft solids. Non pulsating flow. Gentle pump action does not damage shear-sensitive products. Easy to service and maintain. INDUSTRIAL: From water to the most difficult, e.g. transferring foaming solutions with entrained air or solids, such as soap, circulating abrasive and non abrasive slurries. Transferring inks, dyes, starches etc. CHEMICAL: Circulating and transferring various chemicals such as ammonia, barium, copper sulphate, glycerine, nickel chloride, silver nitrate; various acids such as boric, carbonic, citric and photo processing solutions, widely used for polyelectrolyte.      Jabsco Bronze Pump Head Only Kit Flanged

Jabsco Pump Head Only Peo 145Tc Ss Nit   FEATURES Pump Body: 316 Stainless Head with Bracket or Complete Motor Pump Unit Port Size: 1" NPT Internal Flow: Nominal 21.8 USgallons/min at 1750rpm Pressure: Pressure up to 1.5 bar Impeller: Neoprene, Nitrile, Viton or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton Shaft: 316 Stainless Steel Motor: 115/230 Vac, Single Phase, 60Hz, 1-1/2 HP, 1740 RPM, TEFC, C-Face, H145TC Frame, Overload Protected, Capacitor Start.     APPLICATIONS / CHARACTERISTICS Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft). INDUSTRIAL: Circulating and transferring,velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc. PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump. PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries. FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders. AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.   Jabsco Pump Head Only With Motor Bracket 316SS 1" NPT Nitrile Impeller Carbon Seal

Jabsco Pump Head Only Brz Hk 040 Bsp FEATURES Pump Body: Bronze Head Kit with Motor Adaptor Port Size: 3/4" BSP internal thread Flow: up to 35 litres/minute @ 1500 RPM Impeller: Neoprene or Nitrile Shaft Seal: Carbon/Ceramic mechanical seal, Nitrile. Shaft: Stainless steel shaft extension Motor Bracket: Epoxy-coated aluminium, suitable for B3/B14 D80 frame motor to IEC 71 standard     APPLICATIONS / CHARACTERISTICS Self primes from dry up to 3.0 metres. Handles hard or soft solids. Non pulsating flow. Gentle pump action does not damage shear-sensitive products. Easy to service and maintain.   INDUSTRIAL : From water to the most difficult, e.g. transferring foaming solutions with entrained air or solids, such as soap, circulating abrasive and non abrasive slurries. Transferring inks, dyes, starches etc.     CHEMICAL : Circulating and transferring various chemicals such as ammonia, barium, copper sulphate, glycerine, nickel chloride, silver nitrate; various acids such as boric, carbonic, citric and photo processing solutions      Jabsco Bronze Pump Head Only Kit 3/4" British Standard Pipe Internal Threads, Nitrile Impeller  

Hydra-Cell 2003-NF-AA-P2 Vector Natural Rubber Hose Pump

Jabsco Pump Head Only Peo Ss 184Tc Nit   FEATURES Pump Body: 316 Stainless Head with Bracket or Complete Motor Pump Unit Port Size: 1 1/2" NPT Internal Flow: Nominal 51 USgallons/min at 1750rpm Pressure: Pressure up to 1.5 bar Impeller: Neoprene, Nitrile, Viton or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton Shaft: 316 Stainless Steel Motor: 5 HP, 230/430 VAC 3Phase, 1750 RPM, TEFC, 184 TC Frame, C-Face.     APPLICATIONS / CHARACTERISTICS Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Self-priming from dry up to 2.4m (7.8ft). INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine ,brine, etc. PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions.Filling line supply pump. PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries. FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whisky, wine, rums, juices and ciders. AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides   Jabsco Pump Head Only With Motor Bracket 316SS 1 1/2" NPT Nitrile Impeller Carbon Seal

Flojet 20033-001 Kit 1 Cam/Brg Assy  

Flojet 20033-005 Kit  

Gianneschi KCB2003 Repair Kit For CB20

Gianneschi KCB2003E Repair Kit For CB20E

  Jabsco offers 3 options of Oil Change Systems to help you get you ready for Winter.         The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.       The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pan or transmission sump.         The Do-it-Yourself Oil Changer will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine's dip stick tube, usually in less than 5 minutes.       The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing oil in Boats, RV's, and Lawn and Garden Equipment.     Specials    Closeouts   Remanufactured    Rebates

Original Equipment Quality Replacement Yamaha Tilt Trim Motor - 1990-2003 250HP/1994-2003 225HP Units Replacement outboard tilt trim motor that will fit Yamaha 225HP-250HP 1993-2003. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: YAMAHA Tilt Trim Motor 61A-43880-02-00 YAMAHA Tilt Trim Motor 61A-43880-01-00 YAMAHA Tilt Trim Motor 61A-43880-00-00 SIERRA Tilt Trim Motor 18-6782  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  For many years, Jabsco Water Pressure Pumps have been the preferred system for cleaning marine vessels, making it an industry standard.  That's because all Jabsco products are specifically designed to fit the expressed needs of boat builders and enthusiasts alike.       Features:    -High pressure jet blasts mud and silt from anchor chain and decks  -Waterproof, sealed motors  -Dry running capability  -Thermal overload protection automatically stops the motor if it overheats       Specials   Closeouts    Remanufactured    Rebates