|
Jabsco 53041-2003-230 Pump 230V 50Hz
Heavy Duty Utility 1" Self-Priming Flexible Impeller Pump
230 volt, single phase, 50Hz IP54 Electric Motor, Nitrile oil-resistant impeller
Connections: 1” BSP internal threaded ports
Output: up to 9.5 GPM
Built-in dry-running protection for up to 30 minutes after initial prime
Rapid self-priming from dry up to 2m
Will handle hard or soft solids
Corrosion resistant bronze body, stainless steel shaft
Carbon-ceramic mechanical shaft seal
Simple, fully serviceable design with few wearing parts
Continuously rated motor
|
1274.63 |
|
|
Ampco Pumps P1GS015304000 Wave Spring
|
17.01 |
|
|
Jabsco 50860-0012 Series SS Cyclone Circulation Pump
Pump Body:
Stainless Steel
Port Size:
3/4" pipe threads. Available with NPT or BPS threads.
Flow:
80 Litres/min (21.1 USgallons/min)
Pressure:
up to 1.3 bar (19psi)
Impeller:
Stainless Steel Anti-clog impeller design.
Shaft Seal:
Mechanical
Motor:
Max. 30 minutes duty (Min. 30 minutes off).
ISO 8846 MARINE and USCG Regulations for Ignition Protection • ISO 8849 MARINE Bilge Pump Standard.
APPLICATIONS
Silent running. Single tool servicing. 2m (6 foot) suction lift when wet.
A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations
Jabsco Cyclone SS Centrifugal Pump Hi-Pressure 12Volt 3/4"NPT 21GPM 19psi
|
495.54 |
|
|
Jabsco 22880-0033 Series Pump 2Hp 3Ph
Pump Body:
Bronze Head Kit with Motor Adaptor
Port Size:
Flanged
Flow:
up to 200 litres/minute @ 1500 RPM
Impeller:
Neoprene or Nitrile
Shaft Seal:
Carbon/Ceramic mechanical seal, Nitrile.
Shaft:
Stainless steel shaft extension
Motor Bracket:
Epoxy-coated aluminium, suitable for B3/B14 D100 frame motor to IEC 71 standard
APPLICATIONS
Self primes from dry up to 3.0 metres. Handles hard or soft solids. Non pulsating flow. Gentle pump action does not damage shear-sensitive products. Easy to service and maintain.
INDUSTRIAL: From water to the most difficult, e.g. transferring foaming solutions with entrained air or solids, such as soap, circulating abrasive and non abrasive slurries. Transferring inks, dyes, starches etc.
CHEMICAL: Circulating and transferring various chemicals such as ammonia, barium, copper sulphate, glycerine, nickel chloride, silver nitrate; various acids such as boric, carbonic, citric and photo processing solutions, widely used for polyelectrolyte.
Jabsco Bronze Pump 2HP 3Phase Motor
|
1298.82 |
|
|
Neoprene Impeller
FITS JABSCO PUMP 12490 SERIES
|
206.62 |
|
|
Jabsco 31800-0092 Series Industrial Diaphragm Pump
Pump Body:
Glass Filled Polypropylene, Four Piston, Diaphragm Pump
Port Size:
Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread
Flow:
4 GPM/15 LPM
Pressure:
Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C).
31800 Series: No Switch
31801 Series: Cut-In 20 PSI, Cut-Out 40 PSI.
Elastomers:
Diaphragm: Santoprene
Valves: Viton
Motor:
Permanent Magnet with Thermal Overload Protection. Continuous duty at 15 psi (1 bar) and 70°F (21°C) ambient temperature.
APPLICATIONS
Self-Priming to 10 ft. (3 m) (wet) 5 ft. (1.5m) (dry). Runs Dry Without Damage. Smooth Flow. Snap-in Ports. Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C). Viscosity: 250 cP maximum.
CONSTRUCTION – Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems. Superior equipment washdown results can be enjoyed with the 30801-Series pumps.
AGRICULTURAL – Supply pump for herbicide and pesticide sprayers and sprayboom equipment.
INDUSTRIAL – Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.
NOTE: Viton equipped models are not suitable for potable water applications.
Jabsco Industrial Diaphragm Pump 12Volt No Switch
|
303.23 |
|
|
Jabsco 31801-0092 Series Industrial Diaphragm Pump
Pump Body:
Glass Filled Polypropylene, Four Piston, Diaphragm Pump
Port Size:
Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread
Flow:
4 GPM/15 LPM
Pressure:
Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C).
31800 Series: No Switch
31801 Series: Cut-In 20 PSI, Cut-Out 40 PSI.
Elastomers:
Diaphragm: Santoprene
Valves: Viton
Motor:
Permanent Magnet with Thermal Overload Protection. Continuous duty at 15 psi (1 bar) and 70°F (21°C) ambient temperature.
APPLICATIONS
Self-Priming to 10 ft. (3 m) (wet) 5 ft. (1.5m) (dry). Runs Dry Without Damage. Smooth Flow. Snap-in Ports. Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C). Viscosity: 250 cP maximum.
CONSTRUCTION – Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems. Superior equipment washdown results can be enjoyed with the 30801-Series pumps.
AGRICULTURAL – Supply pump for herbicide and pesticide sprayers and sprayboom equipment.
INDUSTRIAL – Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.
NOTE: Viton equipped models are not suitable for potable water applications.
|
309.02 |
|
|
Jabsco 31820-0494 Series Industrial Diaphragm Pump
Pump Body:
Glass Filled Polypropylene, Four Piston, Diaphragm Pump
Port Size:
Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread
Flow:
3 GPM/12 LPM
Pressure:
Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C). No Switch.
Elastomers:
Santoprene Diaphragm, Valves of Viton
Motor:
Commercial Duty, Permanent Magnet with Thermal Overload Protection. Corrosion Protected. Conforms to Electromagnetic Compatibility 89/336/EEC and Machinery Directive 89/392/EEC, EN50081-1
APPLICATIONS
Self-Priming to 10 ft. (3 m). Runs Dry Without Damage. Smooth Flow. Snap-in Ports.
CONSTRUCTION: Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems.
AGRICULTURAL: Supply pump for herbicide and pesticide spraying equipment.
INDUSTRIAL: Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.
Jabsco Industrial Diaphragm Pump 24V 3GPM No Switch
|
392.34 |
|
|
JABSCO 31777-0000 VARIABLE SPEED PUMP DRIVE 12/24V
Compatible Pump Requirements:
•Diaphragm pumps with 3, 4 or 5 pumping chambers.
•12 or 24 VDC.
•12 amp maximum at 12 Volts.
•6 amp maximum at 24 Volts.
•3 amp minimum pump rating.
•MPU pressure switch rating: 30 to 65 psi.
•Motor voltage must match system voltage.
•Not compatible with Flojet 4405 and Jabsco 31295/31395 Series pumps.
|
144.29 |
|
|
Jabsco 50080 50200 Series Clutch Pump
Pump Body:
Bronze
Port Size:
50080 Series: 1" BSP
50200-2011 Series: 1 1/2" BSP
Flow:
50080 Series: Nominal 80 Liters/min (17.8 gallons/min) at 1500rpm
50200-2011 Series: Nominal 200 Litres/min (44.5 gallons/min) at 1500rpm
Impeller:
Neoprene or Nitrile
Shaft Seal:
50080 Series: Lip Type
50200-2011 Series: Mechanical Carbon/Ceramic
Shaft:
316 Stainless Steel
Pulley:
Anodized Aluminum. 178mm (7") 'A' or 'B' section.
APPLICATIONS
Electric Clutch Pedestal Mount Pump. British Standard Pipe Threads.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).
Jabsco Clutch Pump 50200-2011, 1-1/2" British Standard Pipe Threads, Neoprene Impeller, 12V, 2 Groove "A" Belt Pulley
|
1495.39 |
|
|
The Rule-Mate Series of Bulge Pumps feature a solid state water sensing technology that eliminates the need for a seperate float switch.
When water enters the bilge and reaches a certain height (2-3/4") a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off. The sensor's unique “field effect” technology will only recognize water. If a 100% concentration of oil is detected the pump will not activate. This is not a zero discharge prevention system. The result is the most technically advanced bilge pump available in the marketplace.
Now you can experience all the comforts of home at sea with Jabsco range of Deluxe Flush Marine Toilets.
Jabsco is proud to announce the launch of the complete range of Deluxe Flush luxury marine toilets, with the addition of the new 14" toilet. Designed for the discerning owner looking for luxury and comfort, the Deluxe Flush Range features space saving stylish design with minimal water usage and virtually silent operation.
Specials Closeouts Remanufactured Rebates
|
|
|
The following Jabsco series of pumps will be unavailable until approximately May 2011.
JA 36600-
JA 36680-
JA 36960-
JA 36900-
JA 36800-
JA 36950-
JA 36950-
|
|
|
Jabsco offers 3 options of Oil Change Systems to help you get you ready for Winter.
The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.
The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pan or transmission sump.
The Do-it-Yourself Oil Changer will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine's dip stick tube, usually in less than 5 minutes.
The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing oil in Boats, RV's, and Lawn and Garden Equipment.
Specials Closeouts Remanufactured Rebates
|
|
|
For many years, Jabsco Water Pressure Pumps have been the preferred system for cleaning marine vessels, making it an industry standard. That's because all Jabsco products are specifically designed to fit the expressed needs of boat builders and enthusiasts alike.
Features:
-High pressure jet blasts mud and silt from anchor chain and decks
-Waterproof, sealed motors
-Dry running capability
-Thermal overload protection automatically stops the motor if it overheats
Specials Closeouts Remanufactured Rebates
|
|
|
Jabsco's NEW VFlo Water Pressure Pump, Quiet With A Constant Flow
The new variable flow, constant water pressure pump now featuring the revolutionary new technology, designed to automatically diagnose and monitor all aspects of your pump and water pressure system performance to prevent system failure. V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform the variety of onboard delivery tasks.
Specials Closeouts Remanufactured Rebates
|
|