|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
13mm High-Load Trolley with 2X M4 Tapped Holes
This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.
Features:
High-load trolley with two M4-tapped holes on top
Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail
Retaining clips keep ball bearings captive when the trolleys are removed for maintenance
Specifications:
Length (mm): 56 mm
Length (in): 2-3/16 in
Width (mm): 40 mm
Width (in): 1-9/16 in
Weight (g): 57 g
Maximum Rated Load (kN): 1.4 kN
Height (mm): 19 mm
Height (in): 3/4 in
Weight (oz): 2.01 oz
Breaking Load (kN): 6.7 kN
|
87.73 |
|
|
Upload/Download Cable for NavNet to PC, 5 Meters
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.46 |
|
|
Dock Edge "C" Guard Economy PVC Profiles 10ft. Roll - White
This economy "C" Shape co-extruded Profile is made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. It will not crack or distort with temperature extremes. It comes in easy to install 10 Ft. coil. It can be used on flat surfaces as well as on pilings.
Product Specifications:
Part No.: 1132-F
Description: "C" Guard Profile, (10 Ft/Roll), White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
24.28 |
|
|
Venus GX Control - No Display
Features:
Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.
VRM Online Portal All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.
Remote Console on VRM The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.
Automatic genset start/stop A highly customizable start/stop system. Use state of charge, voltage, load and other parameters. Define a special set of rules for quiet times, and optionally a monthly test run.
Data logging When connected to the internet, all data is sent to the VRM Portal. When there is no internet connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or offline converted with the VictronConnect app, for analysis.
Supported products - Multis and Quattros, including split-phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing configuration is possible (only remotely via the internet, not without an internet connection). - EasySolar 1600VA - BlueSolar MPPT Solar Chargers with a VE.Direct port. - BlueSolar MPPT 150/70 and the MPPT 150/85 with VE.Can port. - SmartSolar MPPT 150/70 and the MPPT 150/100 with VE.Can port. When multiple BlueSolar MPPTs or SmartSolar MPPTs with VE.Can are used in parallel, all the information is combined as one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers. - BMV-700 family can be connected directly to the VE.Direct ports on the Venus GX. Use the VE.Direct Cable for this. - BMV-600 family can be connected to the VE.Direct ports on the Venus GX. Requires an accessory cable. - Lynx Ion + Shunt - Lynx Ion BMS - Lynx Shunt VE.Can - Skylla-i battery chargers - NMEA2000 tank sensors - A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position. - Fronius PV Inverters When more than two VE.Direct products must be connected, USB can be used.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
327.42 |
|
|
There are plenty of benefits that come with starting a business, including having more flexibility and freedom with your schedule. For many individuals, however, the process of becoming an entrepreneur is a bit intimidating because it comes with so many questions.
The good news is, there are several opportunities and resources available for veterans these days that can make the path a little easier to travel. Start by reaching out to local businesses that are veteran-owned so you can network; forging a connection with a company like CLR Marine will give you some support as you start your journey. Then, think about how you can protect your business and grow your ideas at the same time.
Start with a sustainable idea
There are tons of business ideas out there, but only one will be perfect for you and your specific needs and skills. If you have the time and patience, you can build a company from the ground up based on something you enjoy doing, such as woodworking or baking. However, you might consider looking into a franchise, which includes benefits such as built-in branding that already has a customer following and a handbook for daily business operations. This is a great way to ease into the business world because it takes some of the pressure off your shoulders.
Look for funding
Once you have an idea of what sort of business you want to start, it’s time to look for funding. There are several resources available for veterans, but there may only be a few that are right for you. Decide whether you want to look for a loan or a grant, then do some research on which ones you qualify for. Keep in mind that some grants may depend upon the size of your business and whether you plan to have employees, while others factor in your years of service or whether you are living with a disability. It’s also important to note that there are many other resources available to help you cut down on costs and save money throughout the year.
Get some benefits
One resource available to all business owners is the formation of an LLC, or Limited Liability Company. This is a great way to add some protection to your company as well as some tax benefits, as Florida LLC owners aren’t required to pay state taxes on their business income. There are some other tax requirements, however, so it’s essential to find out the rules and regulations that are specific to the state of Florida. Read over the specific steps and guidelines for forming an LLC, and consider using a formation service that can help you get through the process with no issues.
It’s important to stay organized during this process, so create an area to safely file paperwork related to your business. Keep it separate from your personal files so there will be no confusion come tax-time.
Expand your education
One final consideration to make when you’re ready to start a business is how to expand upon your education. As a veteran, you already have an advantage in the business world due to your leadership skills and the ability to adapt to change, so now might be the time to focus on learning more about building a successful website or how to create a marketing plan. There are plenty of free educational opportunities for veterans online, including business classes and workshops, but you can also connect with other small business owners to learn how they’ve handled getting set up. Look for networking opportunities on social media and research more about how to create targeted ads on platforms like Facebook and Instagram to reach more customers.
Starting a business can be stressful, but you can minimize frustration by giving yourself plenty of time to set things up. By getting all your ducks in a row and staying organized, you can bring your business plan to fruition.
Ready to get in touch with CLR Marine? Fill out the contact us form or call 877-275-2576.
Kelli Brewer
DeployCare.org
Photo via Pexels
|
|
|
TZ Navigator Weather Routing Module - Digital Download
Navigate Safely & Efficiently
Like all sailors know, the most direct route isn't always the best one. The new Routing Module now combines its revolutionary algorithm allowing you to calculate the optimal sailing route based on weather forecasts, currents, polars of your yacht and your own navigation style, with the powerful features of the former Advanced Routing Module to make one product.
More performance in routing calculation
The new Routing module offers accuracy and flexibility for the most demanding sailing conditions making the software routing calculation easier. It allows advanced sailors to manually control and adjust the weather file parameters in order to get more accurate results. It also introduces the variability notion, helping the skipper to identify the particular moments in the navigation where strategy choices are critical.
Routing Module Features:
Waves are used for routing computation along with wind and currents
One click comparison between several routes and animations to evaluate multiple scenarios
Option to pass a waypoint, leaving it Port or Starboard during multi waypoint routing computation
Alternative Routing
Routing variability calculation and display
Weather File Adjustment
Its use is more intuitive and user-friendly for recreational boaters, while offering multiple setting options for experienced sailors
Routing variability calculation & display
After having created a routing you can display on chart the variability.Variability's value allows identifying quickly important variation of wind direction and strength which require from the skipper a supplementary expertise of his forecasts, routing and sourcing files.
The variability is equal to 100% if wind direction and strength are stable
It will decrease to 80% if the routing shows important variations of the wind direction and strength. It indicates as well the weather transition for example a ridge with a gradient decreasing of pressure thus of wind
Variability is symbolized in the Routing tree by a more or less strong display density (as it is shown in the picture above beside).
Areas colored in Black indicate weather transitions. A very dense black corresponds to a variability < 70 % and it is thus necessary to cross it in the shortest after an analysis more refined and recalculating a new routing before changing criteria as well as modifying parameters and files sources
Light areas show the "Corridors" where weather conditions are more stable depending to forecasts
The ability to overlay both together variability and Sailset allows you to clearly view each transition of different ways (as ridge) across the routing. The Variability value is indicated in each line of the Routing center which corresponds to a time period of the weather routing.
Weather File Adjustment
It is possible to adjust the wind forecast data values, in order, for example, to take into account the hours or wind direction or wind speed, which has been prevailing in the zone for several days.
Increase or decrease the wind speed (%): move the cursor along the slide bar to modify to increase or decrease the percentage
Increase or decrease the wind speed (value): enter directly a value
Change Weather File Time: enter a specific time HH:MM
Change Weather File in Latitude and Longitude
Change Weather File Direction
Increase or decrease in percentage Waves and/or Current values
|
306.00 |
|
|
Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.
L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.
The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market. “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting. According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.
For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place.
Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price.
For more information, please visit www.thewirie.com.
About The Wirie:
Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie. The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution. Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com
About L-com:
Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com
Contact:
Liesbet Collaert
liesbet@thewirie.com
http://www.thewirie.com
The Wirie can now be found at CLR Marine.
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband
http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie
|
|
|
By now, the skipper in your life has probably dropped a few hints about holiday gifts. Was it the note left on the coffee pot about Articulated ABS Barrel Hinge foldable Aluminum Tubing? At first glance, one would have thought that the message was a reminder about being out of coffee filters. Then it comes back to you that there was a conversation in the car about GemLock Assembled Folding Struts.
Foldable aluminum tubing is one of the hottest trends in stainless steel hardware for marine canvas and solar panel frames. The tubing offers versatility in styling, high quality, and ease of use. https://www.clrmarine.com/462m4/manufacturers/g/gemini-marine.html
Back to your captain's holiday gift list. Was there a subtle hint, while you both were swimming off the boat, and your skipper showed concern that the transom ladder seemed a little short by a few steps? She would find getting out of the lake sooooo much easier if she didn't have to reach her foot up so far to the lowest step. She had also mentioned a discussion with other boat captains about the Extend Your Step, an easy-to-use boat boarding ladder extension. Several of her sailing buddies already have them and raved about the ease and portability.
.
All of the products mentioned above are available at CLR Marine.com. How confident are the folks at CLR Marine about the Extend Your Step regarding ease in boarding and extending the ladder length? This product reflects the confidence and integrity of CLR Marine's owner, Chuck Reed. He invented the Extend Your Step! When shopping for the extending ladder, be sure to check out the Extend Your Step Three – a longer and non-moving version of the Extend Your Step! https://www.clrmarine.com/Boat-Boarding-Ladder-Extension
It's possibly time for your captain to give the best seat in the house – on your boat- an upgrade. There is no better place to watch the glint of the sun on the waves than in a stern perch seat. Stern rail seats are now available for older model boats, even pre-1993, and the seats are removable. https://www.clrmarine.com/sternperch-seats.html
Stocking Stuffers
Floatable key rings. If you are old enough to have keys, then you are old enough to lose keys. House keys, boat keys, car keys – when these fall into the drink and aren't retrievable, your boat outing takes a turn for the worse. Car key fobs are expensive to replace. Neon colored strong straps or carabiner clips offer added security against key loss.
DryCASE Smartphone Case
The DryCASE waterproof cell phone case keeps your electronics protected, whether surfing, paddle boarding, or canoeing. The DryCASE uses vacuum seal technology to ensure a watertight seal every time. Best of all, you'll still be able to use your touch screen to text or make calls, and the crystal clear covering makes taking pictures a cinch. When you purchase the DryCASE you will also receive a small hand pump, neoprene armband, and a lanyard $36.92. https://www.clrmarine.com/m4/45443—drycase-smartphone-case.html
RAM Mount AQUA BOX Medium
RAM AQUA BOX® cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics and use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be attached to many RAM mounting bases and kits. Ideally suited to Motorcycles and ATV's, the AQUA BOX keeps your portable devices safe, dry, and accessible $36.49.
Scotty 130 Paddle Safety Leash
Paddles, rods, nets, gaffs, and many other items can be secured while in use with the Scotty Safety Leash. Features include two extra strong Scotty 1009 swivel snaps; super-strong Flex Coil cord allows for maximum unrestricted movement and stretches to approx. 6'. Unit Includes two figure eight securing straps $11.99. https://www.clrmarine.com/m4/37811--scotty-130-paddle-safety-leash-black.html
Gifts under $30.00
Don't forget about covers for your water toys.
The Dallas Manufacturing Co – Pedal Boat Cover will keep your pedal boat dry, dirt free, and protected from the sun when not in use. Features include 150 Denier Silver Polyester, fits both 3 and 5 Person Pedal Boats and is backed by a one year warranty $13.19. https://www.clrmarine.com/m4/36879—dallas-manufacturing-co-pedal-boat-polyester-cover.html
Mustang Lil' Legends 70 Youth Vest - Fluorescent Yellow-Green/Gray
Have guests arrived on your boat with a small young family member who needs a life vest? The Mustang Lil's Legends is a quality youth vest, and it never hurts to have a spare on board. It fits a child 50-90 pounds $21.59.
https://www.clrmarine.com/m4/49897—mustang-lil-legends-70-youth-vest-50-90lbs-fluorescent-yellow-green-gray.html
Be good—Santa's watching. Stay healthy. Fair Winds. Smooth sailing.
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com
______________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Join them live through a video webcasts September 29, 30 and October 1 http://epa.gov/greatlakes/live
Lake Michigan: State of the Lake and Great Lakes Beach Association Full agenda: http://aqua.wisc.edu/SOLM/
9:30 - 11:30 am Welcome and Opening Remarks
11:30 am – 1:00 The Collaboration Challenge, Maximizing the Economic Possibilities, Paul Linzmeyer and Sammis White
1:00 - 3:20 Rapid Assessment Methods and Predictive Models for Beach Management Moderator: Tom Edge
3:20 - 4:20 Socio-Economic Benefits of Green Infrastructure and LowImpact Development Moderator: Patty O'Donnell
Wednesday, September 30
7:30 - 9:40 Pathogens and QMRA Moderator: Sheridan Kidd Haack
10:00 - 12:00 Nutrient Management, TMDLs and Bacterial Source Tracking Moderators: Michael Sadowsky and Dean Maraldo
12:00-1:00 Milwaukee's Sustainable Future, Kevin Shafer, Director, Milwaukee MSD
1:00 - 1:40 Nutrient Management, TMDLs and Bacterial Source Tracking - Continued
1:40 - 4:20 Beach Restoration and Stormwater Management Session Chair: Julie Kinzelman
Thursday, October 1
U.S. Areas of Concern Annual Meeting: Implementing Restoration Targets and Achieving On-The-Ground Results for the Great Lakes Full agenda: http://www.glc.org/rap/aocconference
9:00 - 9:30 Welcome and Opening remarks
9:30 - 10:45 Status Report on the U.S. Areas of Concern Program
11:00 - 12:00 President Obama's Great Lakes Restoration Initiative and Implications for Lake Michigan and the AOCs, Todd Ambs
---------------------
Requirements: player for windows media files
More information: http://epa.gov/greatlakes/live
Presentations from the State and Tribal Habitat/Species Workshops
conducted in 2008 and 2009 as part of the Great Lakes Regional
Collaboration's Habitat/Wetlands Initiative are now available online at:
http://glrc.us/initiatives/wetlands/Workshops2008-2009.html.
As a side note: I thought everyone would be interested in reading this news release. Auctioning water in our lifetime…who would have thought it.
First Calif. auction will occur this fall (09/24/2009)
In what is believed to be an unprecedented move, a Southern California water agency plans to auction off enough water in the Chino Basin this fall to supply about 70,000 homes for a year.
"Water in general has always been a very low-priced commodity, and I think the reality is, it's going to start catching up with other utilities. It's going to fluctuate with markets," said Ken Manning, chief executive of Chino Basin Watermaster, a quasi-public entity that manages the basin. "Whether that's right or wrong, I don't know. I just know where it's going."
Water sales are not uncommon in the state, especially in times of drought. But the water auction appears to be the first of its kind.
The Chino Basin is one of the largest groundwater basins in Southern California.
So far, there are expected to be three types of bidders, according to Manning: local water agencies, Southland developers who under state law must show there is enough water to supply new projects and private investment groups that deal in natural resources.
Chino Basin Watermaster plans to auction a total of 36,000 acre-feet, sold in four blocks, in the online auction, which will take place in November.
Manning said he believes the water will go for between $800 and $1,000 an acre-foot, or roughly $30 million. Underground storage in the basin will cost another $30 million.
"We think we're offering a reliable product. It's in the ground. So it will demand a higher price," he said (Bettina Boxall, Los Angeles Times, Sept. 24). – JK
Keeping You Informed CLR Marine
|
|
|
Tighten up security before you shop on Cyber Monday.
Make sure all software on your computer and mobile device is up-to-date, including your OS, browser, and other apps. And if you don't already have it, install a cybersecurity program on your desktop and mobile device (whether it's a Mac or PC) that prevents malware infection to insure maximum coverage.
Never Ever use debit cards to shop online.
Do you want to give cybercriminals direct access to your bank account?
Banks are not like credit card companies. They will bounce your mortgage payment, your car payment and any other bill you have. It usually takes about ten days or more to get things straightened out. By then you have real bills that are bouncing.
Make sure you are on a secure connection.
Look for the padlock icon to the left of the URL when you go to check out. The URL should read “https” and not just “http.
Do Not open Cyber Monday emails with attachments, Dump them in the garbage.
Cyber Monday emails with attachments, especially zip files, are super suspect that they have malware attached to them. Delete them immediately.
Watch out for social media scams, especially on Facebook
Go directly to a store's website instead of using search engines to look for deals.
Delete any Pop-Up it could be redirecting you to a fake site
|
|
|
Purchasing and owning a boat is a major investment. If you want to get the most from your investment, you must keep your boat in working order and in good condition.
Many new boat owners don’t know how to keep up with maintenance. Fortunately, it’s not impractical if you understand what boat maintenance entails and develop a system. Below, CLR Marine discusses some maintenance essentials to prolong your boat’s lifespan and avoid safety issues on the water!
Engines
No component is perhaps more critical than your boat’s engine. Engine failure is not only inconvenient but can also be dangerous when you’re out on the water. That’s why it’s important to prepare and repair your engine while you’re on land and have access to the necessary parts.
There are many steps to checking and maintaining a boat engine, but here are a few of the most crucial ones
●Replace all engine filters and fluids each year.
●Inspect all hoses and clamps, replacing them as needed.
●Inspect the fuel system for leaks or damage, and replace any components that are not in tiptop shape.
●Regularly evaluate the ventilation and exhaust systems.
●Regularly inspect the raw water pump, replacing the rubber impeller once a year.
●Closely evaluate hoses, cables, and any other engine components.
The easiest way to keep up with the responsibilities is to use PDF files to track, update, and share maintenance schedules and duties. Use this tool to add pages to a PDF and easily modify the document as needed.
Electrical Components
Your boat’s electrical system is also challenging to maintain when you’re already on the water. Avoid leaving the radio, light, or other electrical parts on for extended periods when the engine is running; otherwise, you could face a dead battery.
Inspecting the battery and cable connection for corrosion and other damage is also a good idea. Replace the battery, cables, breakers, switches, fuses, and any other parts that need it. Further, you’ll want to ensure all the lights are functioning and that you have quality jumper cables for emergencies.
Hull, Propeller, and Motor
It’s critical to check the hull, propeller, and motor to ensure they are in top condition. Fight the temptation to procrastinate on replacing any necessary components until next season. The last thing you want to do is forget and face problems on the water.
The propellers should be properly secured, straight, and undamaged. Ensure the hull doesn’t have any distortions, cracks, or blisters, and give it a good deep cleaning. While you’re at it, evaluate your anchor and its rode to confirm they are up to the task.
Safety Gear
The importance of having a good set of jumper cables for emergencies. Several other items are necessary to protect you and others on the water. Make sure you have the following safety equipment and that they’re in working order:
●Life jackets
●Fire extinguishers
●Carbon monoxide detector
●A basic first aid kit
●An emergency signal kit
Cosmetics
Finally, you want to ensure your boat looks the part. This means cleaning it regularly and winterizing it for the cold months. Also, Make sure you have the right to use the right supplies and tactics to keep your vinyl upholstery sparkling and free of mildew stains.
Don’t allow your investment to go to waste. Keeping up with boat maintenance is essential for keeping your boat safe, functioning, and attractive. Coming up with a schedule and a checklist can make the difference between enjoying a long-lasting boat and paying for expensive repairs.
Would you like to read more helpful content or browse our wide selection of marine supplies? Visit CLRMarine.com today!
Written By Kelli Brewer
|
|
|
WeatherLink for Vantage Pro2™ & Vantage Vue®
For the ultimate in weather monitoring, add WeatherLink to your Vantage Pro2™ or Vantage Vue®. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when its not connected to your PC. Later, download the data and use the software to create graphs, generate summaries, and more.
Expanded Reporting:
See current conditions at a glance on the instant weather bulletin. Graph data on a daily, weekly, or yearly basis. Or view multiple weather variables at the same time to see their relationships.
Create Weather Watcher Reports in NOAA National Climatic Data Center Format
View special reports on heating degree days, cooling degree days, and fuel-oil demand. With optional sensors, see reports on evapotranspiration, leaf wetness, soil moisture, soil temperature, sunburn risk for each skin type, and solar energy.
Sharing Your Weather Data
Help the National Weather Service develop improved weather prediction models by submitting your data to the Citizen Weather Observer Program via APRS or the Internet.
Create your own weather website or post weather conditions to a LAN using our included HTML templates. Upload other files (such as images from a webcam) along with your weather data.
Participate in The GLOBE Program, an international weather-related science program for students from elementary through high school, supported by NASA and NSF.
|
225.00 |
|
|
WeatherLink®, Windows, Serial Port
Add WeatherLink to your Vantage Vue or Vantage Pro2. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when it's not connected to your PC.
Add this popular model of WeatherLink to any Vantage station or Weather Envoy. Suitable for everyone from the home weather buff to the most demanding scientific user. Store weather data even when it's not connected to a computer. Later, download the data and use the software for detailed analysis and graphing. Our popular WeatherLink with standard data logger is ideal for most purposes, while other models add special features designed for specific user groups.
Features
Expanded Reporting
Graphs Graph data on a daily, weekly, or yearly basis
Compare Data See current conditions at a glance with an instant weather bulletin or view multiple weather variables at the same time for comparison
NOAA Create Weather Watcher Reports in NOAA National Climatic Data Center Format
More Weather Data View weather information not available on the console, including heating degree days, cooling degree days, and fuel-oil demand
Optional Sensor Reporting With optional UV and solar radiation sensors, get details on sunburn risk and solar energy
Moon Phase With Vantage Pro2 and Vantage Vue, you can see the phase of the moon right on the console.But now even Perception and Weather Wizard III owners can view the phases of the moon using WeatherLink
Sharing Your Weather Data
Create Your Own Reports Data can be exported to most popular spreadsheets, databases, and word processing programs
Weather Website Create a weather website or post weather conditions to a LAN. Add graphs, text lines, or scrolling ticker tapes, and upload other files (such as webcam images) along with weather data
Citizen Weather Observer Program Submit your data to the National Weather Service to help develop improved weather prediction models
The GLOBE Program Participate with other schools in the Global Learning and Observations to Benefit the Environment program, an international weather-related program for students from elementary through high school. Supported by NASA and NSF
Includes
Data logger
Software on CD
Download cable to connect the data logger to your computer
Getting Started Guide and Online Help
Specifications
Compatibility
Data logger fits neatly into all of the following models: Vantage Pro, Vantage Pro2, Vantage Vue, and Weather Envoy.
Data Storage & Transfer
User-Selectable Storage Interval. Choose 1, 5, 10, 15, 30, 60, or 120 minutes. Store up to six months' worth of data depending on the storage interval. (Up to four months for Perception or Weather Wizard III.)
Standard Data Logger. Log and store data, even when the data logger is not connected to your PC. Transfer the data as often as you like, or leave the software running to transfer it automatically each day
System Requirements
Requires Windows XP and above with an available USB port
|
225.00 |
|
|
RAM® X-Grip® Phone Mount for Wheelchair Armrests
This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the armrest on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included long double socket arm, double ball adapter, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.
Specifications:
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
|
86.65 |
|