Haight Pump 40U Pump Vit Sl No R/V Specifications Construction Material:  Ductile Iron Capacity (max):  40 gpm Discharge Pressure (max):  250 psi Temperature:  625 degrees F Inlet Port: 1-1/2 inch NPT  Discharge Port: 1-1/2 inch NPT This is the Pump End Only less motor   40U - Series DIU Square Flange Internal Gear Pump   Compact, rugged, and easy to maintain, these positive displacement pumps are ideally suited to close-coupled mounting to the motor or footed mounting. Haight Pumps bolt-on footed brackets match standard NEMA motor height eliminating pump or motor shimming. Each bracket size is designed to align the pump and motor shaft heights without shim blocks.

Haight Pump 40U-VMS Pump Mech Seal No Rv Specifications Construction Material:  Ductile Iron Capacity (max):  40 gpm Discharge Pressure (max):  250 psi Temperature:  625 degrees F Inlet Port is 1-1/2 inch NPT  Discharge Port is 1-1/2 inch NPT Seal: Viton Mechanical Seal Pump End Only less motor     40U - Series DIU Square Flange Internal Gear Pump   Compact, rugged, and easy to maintain, these positive displacement pumps are ideally suited to close-coupled mounting to the motor or footed mounting. Haight Pumps bolt-on footed brackets match standard NEMA motor height eliminating pump or motor shimming. Each bracket size is designed to align the pump and motor shaft heights without shim blocks.

Haight Pump 40U-VLS-OT-SS Pump W/Vit Lp Sl Ss Plug Ot

Haight Pump 40UR-VMS Pump Vit Mech Sl Rv Specifications Construction Material:  Ductile Iron Capacity (max):  40 gpm Discharge Pressure (max):  250 psi Temperature:  625 degrees F Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT Seal: Viton Mechanical Seal Pump End Only less motor   40U - Series DIU Square Flange Internal Gear Pump   Compact, rugged, and easy to maintain, these positive displacement pumps are ideally suited to close-coupled mounting to the motor or footed mounting. Haight Pumps bolt-on footed brackets match standard NEMA motor height eliminating pump or motor shimming. Each bracket size is designed to align the pump and motor shaft heights without shim blocks.

We have added about 20,000 Quicksilver Marine Parts and Accessories.  These have been removed due to costs, please see Sierra for direct replacement parts at half the price   Along with a Drive Train Page that will help you find the information your looking for with How To instructions.  This page is a work in progress, if you know of anything you would like to see added let us know at CLR Marine.   We are also in the process of adding Osco Motors Corp. Manifolds and Parts to our web site.  

Haight Pump H52L 10-40U Lp Spring 20-40Psi

Haight Pump H52M 10-40U Mp Spring 50-80Psi

Haight Pump H52N 10-40U Mhp Spring 90-130Psi

Haight Pump H52P 10-40U Hp Spring 120-220Psi

Haight Pump RRK0034 Buna Mech Seal Kit 24-40U

Haight Pump RRK0037 Vit Mech Sl Kit 24-40U

Haight Pump Z213S Mounting Braket for 10-40U

Haight Pump Z56SO Brkt For 10U-40U

PT-40U Battery Charger Newmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life. A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance. Features: 12-volt model “Smart” circuitry provides three-stage charging – bulk, absorption, and float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current. (Except PT-7) The optional sensor adjusts the output voltage based on battery temperature. (Except PT-7) Current limitations prevent damage from overloading Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line Built to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 90-264 Input Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 3.4 Power Factor: .98 @ 115V and .95 @ 230V Max Output Amps: 40 Output Banks: 3 Battery Capacity (Amp-Hours): 80-400     Operating Temp. Rating Reference: T-5 Case Size Reference: A-3 Case Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth Weight Lbs./Kg: 11/6 Optional Temp. Sensor Model: TCS-12/24                 Remote Panel Model: EVM-12-2     Equalize Option: No Output Indicator Reference: M-3 Compliance Reference: CG Temperature Rating References: Temperature: -20 degrees C to +70 degrees C Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load Compliance References: CG: USCG CFR 183.410 (Ignition protected) CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options: Remote Panel, model EVM-12-2, for us with model PT-40 only (Enables monitoring of when the battery charger is “on” and the batteries’ state of readiness, at a glance of two (2) battery banks only) Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint! As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power. The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power. Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to! This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels. Order the NXL-M4 for insane power out on the water! Features: Hardware resistant to corrosion and UV Protection Coated 4 Layers PCB to prevent corrosion IPX5 Water Resistance Grade High Level Input For Radio Use Front cover to keep the controls safe to the elements LED Clip Indicator to easier adjustment Stable and Reliable Class D Circuit Design Sound Quality Verification Using AP Instruments Direct Insert Power and Speaker Terminals Short Circuit, Thermal, and Voltage Protection Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz  2 Ohm RMS Power Per Channel - 4 x 230W  4 Ohm RMS Power Per Channel - 4 x 150W  4 Ohm RMS Power Bridge Channel - 2 x 440W  Signal-to-Noise Ratio - >90dB  Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7" *Sold as an Individual