|
Haight Pump 3U Pump Vit Lip Sl No Rv
Specifications
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 3 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
3U - DIU Series Round Hub Positive Displacement Pumps
The Universal Pump Design combines the innovation of our UniverSeal shaft seal, the rugged simplicity of Haight's proven "gear within a gear" internal gear configuration, with the flexibility of a bolt-on, integral Relief Valve assembly. This combination of pump features offers pump users unsurpassed flexibility to adapt their pumps to changing system requirements.
All UniverSeal Shaft Seal Pumps features:
* reduce maintenance expenses - simple, quick seal changes
* less production disruption and downtime - perform maintenance in place rather than in the shop
* reduce maintenance inventory - one pump can be adapted to meet many application requirements
* provide future adaptability - easily change the pump as your needs change
* reduce replacement parts costs, no special custom design parts
* interchangeable with existing Haight pumps without modification
* pumps specified with an integral relief valve can be quickly and easily changed to perform in either suction return, or tank return mode. The relief valve can be readily changed to operate in either clockwise or counterclockwise flow direction.
|
579.23 |
|
|
Haight Pump 3U-VMS Pump Viton Mech Seal No Rv
Specifications
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 3 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
Seal: Viton Mechanical Seal
3U - DIU Series Round Hub Positive Displacement Pumps
The Universal Pump Design combines the innovation of our UniverSeal shaft seal, the rugged simplicity of Haight's proven "gear within a gear" internal gear configuration, with the flexibility of a bolt-on, integral Relief Valve assembly. This combination of pump features offers pump users unsurpassed flexibility to adapt their pumps to changing system requirements.
Universal Relief Valve - the relief valve assembly can be added at any time, in the field, with no special tools. The valve can function in either the return to suction mode, or return to tank mode. Available with three different tension springs, the relief valve operates smoothly and effectively over a broad range of setting values.
|
694.43 |
|
|
We have added about 20,000 Quicksilver Marine Parts and Accessories. These have been removed due to costs, please see Sierra for direct replacement parts at half the price
Along with a Drive Train Page that will help you find the information your looking for with How To instructions. This page is a work in progress, if you know of anything you would like to see added let us know at CLR Marine.
We are also in the process of adding Osco Motors Corp. Manifolds and Parts to our web site.
|
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
13mm High-Load Trolley with 2X M4 Tapped Holes
This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.
Features:
High-load trolley with two M4-tapped holes on top
Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail
Retaining clips keep ball bearings captive when the trolleys are removed for maintenance
Specifications:
Length (mm): 56 mm
Length (in): 2-3/16 in
Width (mm): 40 mm
Width (in): 1-9/16 in
Weight (g): 57 g
Maximum Rated Load (kN): 1.4 kN
Height (mm): 19 mm
Height (in): 3/4 in
Weight (oz): 2.01 oz
Breaking Load (kN): 6.7 kN
|
87.73 |
|
|
Throttle Actuator Linkage Parts
These linkage parts connect the Reactor™ 40 Kicker autopilot throttle actuator to Honda, Yamaha®, Mercury, and Tohatsu carburated outboards. Suzuki outboards require a Suzuki linkage part (sold separately). Yamaha EFI outboards require Yamaha EFI Linkage Parts (sold separately).
|
67.49 |
|
|
SUPRAX Parts Kit - 12-Bolts, 3 Sizes of Inserts, 2-Allen Wrenches
Replacement parts to repair SUPRAX. All the parts needed to mount SUPRAX. Mounting bolts and a full set of inserts. Includes allan wrench tool.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.63 |
|
|
Winch Spare Parts Kit - Size 6 to 40
Service your Lewmar winch with all the parts you need in this one it.
Compatible With:
Ocean Standard winches - size 6 to 40
Ocean 14CST and 16CST (self-tailing)
EVO 15ST
*Sold as an Individual
|
50.63 |
|
|
Winch Spare Parts Kit - Size 50 to 60
Service your Lewmar winch with all the parts you need in this one it.
Compatible With:
Ocean Standard winches - size 50 to 60
Ocean 50CST and 60CST (self-tailing)
EVO 50ST - 65ST
*Sold as an Individual
|
40.75 |
|
|
Winch Spare Parts Kit - Size 66 to 70
Service your Lewmar winch with all the parts you need in this one kit.
Compatible With:
Ocean Standard winches - size 66 to 70
*Sold as an Individual
|
98.22 |
|
|
Winch Spare Parts Kit - Ocean 30 - 48ST/EVO 30 - 50ST
Service your Lewmar winch with all the parts you need in this one kit.
Compatible With:
Ocean Standard winches - size 30 to 48
EVO ST/SPT 30 to 50
*Sold as an Individual
|
40.75 |
|
|
AISLink Man Overboard Beacon Parts Kit
Replacement parts kit.
Compatible With:
AISLink Man Overboard Beacon
In the Box:
Mounting bracket
Activation tape
Antenna rewind tool
Programming adapter
Tether
Life-jacket fixing buckle
Fixing buckle patch
Reflective strip x 2
*Sold as an Individual
|
95.47 |
|
|
Premium Spare Parts Kit for Kohler
This spare parts kit is for Engine Reference Kohler 4-6 Cylinder Diesel, 4-6,5 kW Gas, and 12,5 kW Gas.
|
128.48 |
|
|
Little Giant Submersible Pump 518020
Little Giant 1-EAYS Submersible Partswasher Pump
Motor 115 Volt 60Hz 1/125 HP Epoxy Encapsulated Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Screened, Outlet: 1/4" MNPT, Nylon Body, Viton Seal, Fluid Temperature Up to 100F (38C), UL Listed, 6 Foot Power Cord
518020 Epoxy encapsulated, centrifugal pump is designed to be used in submerged parts washer applications only. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point no lower than 100 degrees F
|
180.96 |
|
|
Cotter, Ring & Clevis Pin Parts Kit
Kit Contents:
(30) Clevis Pin Dia. 3/16", Grip 9/32"
(30) Clevis Pin Dia. 3/16", Grip 13/32"
(10) Clevis Pin Dia. 3/16", Grip 17/32"
(6) Clevis Pin Dia. 1/4", Grip 13/32"
(30) Clevis Pin Dia. 1/4", Grip 1/2"
(6) Clevis Pin Dia. 5/16", Grip 9/16"
(6) Clevis Pin Dia. 5/16", Grip 11/16"
(2) Clevis Pin Dia. 3/8", Grip 5/8"
(6) Clevis Pin Dia. 3/8", Grip 13/16"
(2) Clevis Pin Dia. 7/16", Grip 7/8"
(1) Clevis Pin Dia. 1/2", Grip 3/4"
(2) Clevis Pin Dia. 1/2", Grip 1"
(50) Circular Pins, 3/16" & 1/4"
(10) Safety Pins, 3/16" & 1/4"
(100) Cotter Pin, 1/16" x 1/2"
(50) Cotter Pin, 3/32" x 3/4"
(25) Cotter Pin, 1/8" x 1"
(10) Cotter Pin, 5/32" x 1-1/4"
|
376.75 |
|