|
Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT Female
Outlet: 1/2" NPT Female and 3/4" NPT Male
Flow:
Up To 24 GPM Maximum
Pressure:
Up To 23 PSI, 53 feet of head
Impeller:
Bronze Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available.
Shaft:
416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use
Motor:
1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
|
1088.10 |
|
|
Oberdorfer 104M-06-10F36BJ Centrifugal Pump
FEATURES
Pump Body: Bronze
Ports: Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow: 24 GPM Max
Pressure: to 23 PSI, 53 feet of head
Impeller: Centrifugal
Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft
|
1298.70 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor
|
1167.30 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet.
A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump Head Only, Bronze
|
681.56 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump 1/3HP ODP 115 Volt Only
|
1301.40 |
|
|
Oberdorfer 172B Cent Pump Peo Brz 3/4" Prt
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
13 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seals - Type 6A/68 Buna Standard, Viton Optional
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP permanent Magnet 12V, 24V, 32V DC.
Rubber base grommets for vibration dampening
1/13 HP Permanent Magnet 12V DC Motor - 172L threaded shaft style.
1/8 HP Capacitor Start 50/60 HZ, 115V & 220V AC Motors with Ignition protection, Thermal overload protection, Power cord with plug.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump Head Only, Bronze, 3/4"NPT P
|
399.75 |
|
|
Oberdorfer 82PB Centrifugal Pedestal Pump
Pump Body:
Bronze
Ports:
Inlet: 1 1/2" NPT
Outlet: 1 1/4" NPT
Flow:
100 GPM Max
Pressure:
50 PSI Max, 118 feet of head
Impeller:
Centrifugal Closed Impeller
Shaft Seal:
Mechanical Seal Buna Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Shaft
Motor / Drive:
Designed for Pulley Drive Applications. We have many motor options available and can assemble for you.
BRONZE CENTRIFUGAL PEDESTAL PUMPS
The Oberdorfer 82BP special pump alloys used provide corrosion resistance to many liquids including water, water solutions, and a wide range of commercial chemicals. Field Convertible to Close Coupled Unit Using Standard Keyed Shaft “C” Flange Motor. Will Handle Contaminated Liquids. Extremely Quiet. May Be Operated with the Shaft Horizontal or Vertical.
|
2199.60 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfers Centrifugal Pump 1/3 HP ODP 115/230V 50/60hz
Aqua-Air AQPM-15, Cruisair PM1500BX
|
1160.10 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfers Centrifugal Pump 1/3HP ODP 115/230V Monel Shaft
|
1487.70 |
|
|
Oberdorfer 104M Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow:
24 GPM Max
Pressure:
to 23 PSI, 53 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump 1/2HP ODP 115/230V Monel Shaft
|
1486.80 |
|
|
Minor Repair Kit for Oberdorfer 501M-06
This kit contains the following items
JA 836-0003-P
1
IMPELLER KIT NITRILE
OB 32953
1
SEAL 501M-05
OB 8232
1
O'RING
This kit is put together at time of order.
|
228.51 |
|
|
Oberdorfer 104M Series Centrifugal Pump
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. Single phase motors are non-reversible and are wired for the proper pump rotation which is counter-clockwise looking at inlet end of pump. See the dimensional drawing. Three phase motors must be checked out for proper rotation when pump is installed. Interchanging of any 2 wires in a 3-phase system will reverse motor rotation.
The pump uses a mechanical type shaft seal with a Nitrile rubber element. It is limited to 212o F. Fluoroelastomer seals and polytetrafluoroethylene (PTFE) seals are available for severe solvents, difficult chemicals, and elevated temperatures.
FEATURES
Rugged bronze construction
A standard in the marine air conditioning industry
Extremely quiet operation
O-ring housing seal eliminates gasket problems
Polytetrafluoroethylene (PTFE) barrier seal to protect motor bearings
Handles contaminated liquids
Discharge port orientation flexibility - 8 positions
Mechanical seal - carbon/ceramic, Nitrile - standard, Fluoroelastomer (S10) optional Polytetrafluoroethylene (PTFE) (S11)
Pump heads mount to standard footed NEMA 56J jet pump motors
Shafts: 416 Stainless, Nickel Alloy or 316 Passivated Stainless
Multiple motor options available
DRIVE
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. Multiple motor options are available.
LIQUIDS & TEMPERATURES
The special pump alloys used provide corrosion resistance to many liquids including water, water solutions, and a wide range of commercial chemicals. Questions as to the chemical compatibility of special liquids should be referred to the factory.
Viscous liquids with a maximum viscosity of 2000 Saybolt Seconds Universal can be pumped. However, when pumping viscous liquids as compared with water, a reduction in flow and pressure occurs and the required horsepower rate increases. Liquids heavier than water require additional horsepower in direct proportion to the increase in specific gravity. Liquids contaminated with small solids or abrasives can be handled, but a reduction in mechanical seal life must be expected.
SUCTION LIFT
These centrifugal pumps are not self-priming. They must be installed below the liquid level so that the liquid flows to the pump by gravity (flooded suction). However, if a foot valve is used at the beginning of the suction line, and all air is bled from the pump by manual priming, the pump will lift on the suction side up to 15 feet.
Such a system relies entirely on the non-leaking foot valve for starting capability. The flow of a centrifugal pump can be conveniently controlled by a throttling valve in the discharge line without the need for a relief valve. In centrifugal pumps, the horsepower demand will decrease as the pressure increases. Maximum horsepower occurs with a wide open discharge.
|
655.31 |
|
|
Oberdorfer 109MB-10J36BJ-50/60 Dometic Low Profile AC Pump
|
1755.94 |
|
|
Oberdorfer 300B-10J36BJ-50/60- Mpu W/316SS Shaft
This item is 'build to order'. Please contact us for lead time.
|
1556.57 |
|
|
Oberdorfer 501M-06 Pump 1 1/4 Brz Buna
|
1925.10 |
|