FINISH THOMPSON STTS-40 USDA SS PUMP 40" Sealed, Medium Viscosity/Flow TT Series pumps offer light to medium viscosity fluid handling.  Drum pumps in this series are ideal for liquids containing small particulate or solvents.   Features include: 316 stainless steel or CPVC tube materials Tubes interchangeable with motors Up to 2000 cP with M6X air motor   Available Lengths:  40 in (102 cm)  Tube Diameter:  1-1/2 in (3.81 cm)  Discharge Size:  1 in (2.54 cm)  Discharge Types:  Hose barb or tri-clamp  Hose Size:  1 in (2.54 cm)    Electric Motor  Air Motor  Maximum Flow:  10 gpm (38 lpm)  16 gpm (61 lpm)  Maximum Head:  10 ft (3 m)  30 ft (9 m)  Maximum Specific Gravity:  1.8  1.8  Maximum Viscosity:  500 cP  2000 cP  Tube Material:  FDA-compliant 316 stainless steel  Shaft Material:  FDA-compliant 316 stainless steel  Spacer Material:  FDA-compliant FEP  Impeller/Compressor Material:  FDA-compliant PTFE with stainless steel pin        Maximum Temperature:  150º F (66º C)   Minimum Temperature:  -10º F (-23º C)

FINISH THOMPSON DB10P PUMP END POLY/CARB/VIT/56C   Applications Water and wastewater Electronics Pharmaceuticals Wet scrubber Pulp and paper   Finish Thompson DB Series Pump FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.   Finish Thompson Pumps: Centrifugal - DB10 Model Motor @ 3450 RPM: 0.33 HP Motor @ 2900 RPM: 0.34 kW Max specific gravity: 1.8 Suction Port: 1.50 in Discharge Port: 1.50 in Impeller Diameter: 3 in (8.9 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 67.0 gpm 16.9 m3/hr Max head 28.0 ft 9.8 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 63, 71, 80, 90, w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW) Max pressure: 80 psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez® Bushing Material: Carbon, PTFE, Ceramic, silicon carbide PART NO. DESCRIPTION DB10P Pump End (PP) DB10PW Wet End (PP) DB10V Pump (PVDF) DB10VW Wet End (PVDF)

FINISH THOMPSON DB7P PUMP END POLY/CARB/VIT/56C Applications Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing Finish Thompson DB7P Pump End FTI DB7 Magnetic Drive Centrifugal DB Series Sealless Pumps, 1 1/2" Suction, 1 1/2" Discharge, FKM O-Ring, Polypropylene, 69 GPM, 80 PSI Max Pressure, 34 Max Feet of Head   BushingCarbonConnection TypeNPT     Discharge NPT (Inches)1 1/2"     Heads To (Feet)34     Impeller Size (Inches)3.18"     Magnet6-pole     MaterialPolypropylene     Maximum Flow (GPM)69      MaxImum Operating Temperature180°F (82°C)     Maximum Pressure (PSI)80 PSI     Motor Frame Size56C     Pressure Rating BAR5.5 bar     Spec. Gravityup to 1.8     Suction NPT (Inches)1 1/2"   Valve/Seat/O-RingFKM

FINISH THOMPSON M102051-2 AC8 MOTOR ADAPTER 21JM

FINISH THOMPSON DB11P PUMP POLY CARB/VIT 56C   Applications   Chemical processing Electronics Pump cleaning solutions Printed circuit boards Pulp and paper     Finish Thompson Pumps: Centrifugal - DB11 Model Motor @ 3450 RPM: 0.72 HP Motor @ 2900 RPM: 0.73 kW Max specific gravity: 1.8 Suction Port: 2.00 in Discharge Port: 1.50 in Impeller Diameter: 3.63 in (10.8 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 78.0 gpm 21.4 m3/hr Max head 41.0 ft. 14.6 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW) Max pressure: 90, (50 for Gylon) psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket) Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB11P Pump (PP) DB11PW Wet End (PP) DB11V Pump (PVDF) DB11VW Wet End (PVDF) ZZZ0002 DB11/15, SP1115 ceramic bushing ZZZ0011 DB11, SP11 magnet upgrade 8-pole (pump end) ZZZ0012 DB11, SP11 magnet upgrade 8-pole (wet end) ZZZ0015 DB11, SP11 magnet upgrade 10-pole (pump end) ZZZ0016 DB11, SP11 magnet upgrade 10-pole (wet end) ZZZ0025 DB11/15, SP11/15 union fitting polypropylene

FINISH THOMPSON DB15P PUMP POLY CARBON VITON 56C   Applications   Bio-filtration Electroplating DI water Electronics Mining   Finish Thompson Pumps: Centrifugal - DB15 Model Motor @ 3450 RPM: 1.40 HP Motor @ 2900 RPM: 0.00 kW Max specific gravity: 1.8 Suction Port: 2.00 in Discharge Port: 1.50 in Impeller Diameter: 4.25 in (50 Hz N/A for this model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 112.0 gpm n/a Max head 63.0 ft. n/a Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW) Max pressure: 90, (50 for Gylon) psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket) Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB15P Pump (PP) DB15PW Wet End (PP) DB15V Pump (PVDF) DB15VW Wet End (PVDF) ZZZ0017 DB15, SP15 magnet upgrade 10-pole (pump end) ZZZ0018 DB15, SP15 magnet upgrade 10-pole (wet end)

FINISH THOMPSON DB6P PUMP END POLY/CARB/VIT/56C Applications Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing Finish Thompson Centrifugal DB6 Model Pump Motor @ 3450 RPM: 0.17 HP Motor @ 2900 RPM: 0.18 HP Max specific gravity: 1.8 Suction Port: 1.00 in Discharge Port: 1.00 in Impeller Diameter: 2.5 in (7.6 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 31.0 gpm 7.9 m3/hr Max head 21.0 ft. 7.5 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 63, 71, 80, 90, w/B14 or B5 Connection type: NPT or BSPNPT, BSP, Flange, Union Magnet set: 6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW) Max pressure: 80 psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez® Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB6P Pump (PP) DB6PW Wet End (PP) DB6V Pump (PVDF) DB6VW Wet End (PVDF) J101460-1 DB6 - 22 Spare Part J102789 DB6 - 22 Spare Part J103617-1 DB6 - 22 Spare Part J103637 DB6 - 22 Spare Part J103638 DB6 - 22 Spare Part J103780 DB6 - 22 Spare Part

FINISH THOMPSON EFP-40 KIT POLY PUMP-MOTOR COMBO

FINISH THOMPSON EFV-40 KIT PVDF PUMP-MOTOR COMBO

FINISH THOMPSON AC4STS1V350B015C 3/4 X 1/2 316SS VTN PUMP HEAD ONLY Applications Chemical processing Printed circuit boards Pharmaceutical Waste water treatment Port Sizes   (Suction x Discharge) &  Connection Types:    0.75 in x 0.5 in NPT/BSP  0.75 x 0.5 in ANSI 150# Flanges  1 in x 1 in ANSI 150# Flanges  1.5 x 0.75 electropolished Tri-clamps    Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  100 psi (6.9 bar)      @3450 RPM  @2900 RPM  Flow Range*:  3 to 39.1 gpm  0.68 to 7 m3/h  Maximum Head:  59.6 ft  11.7 m  Power Range**:  0.25 to 1 hp  0.1 to 0.21 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.    Type:  Stainless Steel Mechanically Sealed  Configuration:  Horizontal  Construction Materials:  316 Stainless Steel  O-ring Materials:  FKM, EPDM, Buna, or PTFE Encapsulated Silicone  Seal Type:  Bellows Type 21  Seal Materials:  Carbon, Ceramic, SiC, FKM, EPDM, Buna, or Kalrez®  Maximum Temperature:  300º F (149º C)  

FINISH THOMPSON AC5STS1V400B015C 1 1/4X3/4 316SS PUMP HEAD ONLY VTN Applications Chemical processing Printed circuit boards Pharmaceutical Waste water treatment  Sizes   (Suction x Discharge) &  Connection Types:    1.5 in x 1.25 in NPT or BSP  1.25 in x 0.75 in NPT or BSP  2 in x 1.5 in NPT or BSP  1.25 in x 0.75 in ANSI 150# Flanges  1.5 in x 1 in ANSI 150# Flanges  1.5 in x 1.5 in ANSI 150# Flanges  2 in x 1.5 in ANSI 150# Flanges  1.5 in x 1 in Electropolished Tri-clamps  1.5 in x 1.5 in Electropolished Tri-clamps  2 in x 1.5 in Electropolished Tri-clamps  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  100 psi (6.9 bar)    @3450 RPM  @2900 RPM  Flow Range*:  5 to 145 gpm  1.14 to 26.3 m3/h  Maximum Head:  88.5 ft  19 m  Power Range**:  0.5 to 3.1 hp  0.21 to 1 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.  Type:  Stainless Steel Mechanically Sealed  Configuration:  Horizontal  Construction Materials:  316 Stainless Steel  O-ring Materials:  FKM, EPDM, Buna, or PTFE Encapsulated Silicone  Seal Type:  Bellows Type 21  Seal Materials:  Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®  Maximum Temperature:  300º F (149º C)

FINISH THOMPSON AC5STS3V478B015C 2X1 1/2 SS PUMP 56C VITON Applications Chemical processing Printed circuit boards Pharmaceutical Waste water treatment   Port Sizes   (Suction x Discharge) &  Connection Types:    1.5 in x 1.25 in NPT or BSP  1.25 in x 0.75 in NPT or BSP  2 in x 1.5 in NPT or BSP  1.25 in x 0.75 in ANSI 150# Flanges  1.5 in x 1 in ANSI 150# Flanges  1.5 in x 1.5 in ANSI 150# Flanges  2 in x 1.5 in ANSI 150# Flanges  1.5 in x 1 in Electropolished Tri-clamps  1.5 in x 1.5 in Electropolished Tri-clamps  2 in x 1.5 in Electropolished Tri-clamps  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  100 psi (6.9 bar)    @3450 RPM  @2900 RPM  Flow Range*:  5 to 145 gpm  1.14 to 26.3 m3/h  Maximum Head:  88.5 ft  19 m  Power Range**:  0.5 to 3.1 hp  0.21 to 1 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.  Type:  Stainless Steel Mechanically Sealed  Configuration:  Horizontal  Construction Materials:  316 Stainless Steel  O-ring Materials:  FKM, EPDM, Buna, or PTFE Encapsulated Silicone  Seal Type:  Bellows Type 21  Seal Materials:  Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®  Maximum Temperature:  300º F (149º C)

FINISH THOMPSON DB8P PUMP END POLY/CARB/VIT/56C Applications Wet scrubber Pulp and paper Heat exchanger Waste water treatment Suction Port Size:  1.5 in  Discharge Port Size:  1 in  Connection Types:  NPT, BSP, Flange, or Union  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  80 psi (5.5 bar)    @3450 RPM  @2900 RPM  Flow Range*:  0.5 to 61 gpm  0.114 to 15 m3/h  Maximum Head:  45 ft  14.1 m  Power Range**:  0.10 to 0.48 hp  0.13 to 0.47 kW

FINISH THOMPSON DB9P PUMP END POLY/CARB/VIT/56C Applications Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing Suction Port Size:  1 in  Discharge Port Size:  1 in  Connection Types:  NPT, BSP, Flange, or Union  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  80 psi (5.5 bar)    @3450 RPM  @2900 RPM  Maximum Flow:  46 gpm  n/a  Maximum Head:  67 ft  n/a  Power Range**:  0.43 to 0.66 hp  n/a *Based on 1.0 s.g.  Type:  Sealless Mag Drive  Configuration:  Horizontal  Construction Materials:  Polypropylene or PVDF  O-ring Materials:  FKM, EPDM, Simriz®, or Kalrez®  Bushing Materials:  Carbon, PTFE, Ceramic, or SiC  Shaft Materials:  Ceramic, Hastelloy® C, or SiC      Polypropylene  PVDF  Maximum Temperature:  180º F (82º C)  220º F (104º C)

FINISH THOMPSON KC10PCEN385C PUMP POLY CARBON EPDM 56C