Stainless Heavy Duty Hasp - 2-11/16" This heavy-duty hasp is designed with a slotted plate that fits over a fixed post. Prevents removal when used in conjunction with a padlock. For added security, all mounting screws are concealed when the hasp is closed. Ideal for securing lockers, cupboards, chests, or hatch doors. Constructed of corrosion-resistant stamped 304 stainless steel. Installs with seven #6 FH fasteners (not included).  Specifications: Length (inch): 2-11/16" Width (inch): 1-3/16" Depth (inch): 7/8" Hasp Eyelet Width (inch): 1/2" Hasp Eyelet to Hasp Pin (inch): 1-7/8" Fastener: #6 FH Weight: .07 lb.

Stainless Heavy Duty Top Cap - 1" Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.

BURKS GA6-1.5MV-5-11/16, PUMP END ONLY with VITON SEAL UNSPSC Code: 40150000

Hatch Handle Latch - 3-1/8" x 2-11/16" Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Deck Step 2-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.  

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 25-Pack Cable Gauge: 2 Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 100-Pack Cable Gauge: 2 Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Lugs - 2 Gauge Wire - 3/8" & 5/16" Post - Combo Pack Cable Gauge: 2 Screw Size: 3/8" & 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Lugs - 2/0 Gauge Wire - 5/16" Post - 25-Pack Cable Gauge: 2/0 Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Lugs - 2/0 Gauge Wire - 5/16" Post - 100-Pack Cable Gauge: 2/0 Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Waterproof 2-Speed Wiper Motor - 1.5" Shaft - 12V High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade. Features: Torque of 15 N-m Two speeds Accepts up to 24 x 24" arm and blade Self-parking gear to left or right Adjustable sweep angle 12V Improved waterproof rating to IP66 Rigid aluminum housing Insulated grounding EMC protected CE Approved Additional Features: Two sweep speeds of 35 or 55 sweeps per minute The sweep angle can be adjusted from 40 to 110 degrees High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life The aluminum construction also provides better stability when mounted The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats Guaranteed for 3 years

Heavy Duty Waterproof 2-Speed Wiper Motor - 3.5" Shaft - 12V High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade. Features: Torque of 15 N-m Two speeds Accepts up to 24 x 24" arm and blade Self-parking gear to left or right Adjustable sweep angle 12V Improved waterproof rating to IP66 Rigid aluminum housing Insulated grounding EMC protected CE Approved Additional Features: Two sweep speeds of 35 or 55 sweeps per minute The sweep angle can be adjusted from 40 to 110 degrees High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life The aluminum construction also provides better stability when mounted The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats Guaranteed for 3 years

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 2-Pack Cable Gauge: 2 Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 25-Pack Cable Gauge: 2 Screw Size: 3/8" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 100-Pack Cable Gauge: 2 Screw Size: 3/8" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.