Polished Stainless Steel Table Pedestal 3" OD x 25-1/2" L All of TACO's Z76-Series table pedestal columns are tapered on the bottom for a secure fit into the base while also allowing for easy removal and storage. Features: Available in satin anodized aluminum rib design or polished stainless steel  Available in three different lengths Custom heights available based upon minimum order quantities 5-year limited warranty Specifications: Finish: Polished Taper: Single Material: Stainless Steel Length: 25-1/2"

Stainless Steel Bow Eye - 3/8" x 4-1/4" These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.

Compression Handle Stainless Steel Non-Locking 3" OD - 1/4 Turn Features: Stainless Steel Non-Locking 3" OD Compression Handle 1/4 Turn

304 Stainless Steel Basket Strainer Only Size 4 for 1/2" Strainer Features: Perko 049300499D 304 stainless steel strainer basket for #4 (1/2"-NPT) Basket Measures 1-13/16"- DIA. X 4-1/16"-High Overall height with a hoop on top is 5-5/8"

Compression Handle - 316 Stainless Steel - Non-Locking - 3" OD Compression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for compartments or hatches. Outer Diameter: 3" Cut-Out:2-1/2" Surface Depth: 1/8" - 5/8" Fastener: Included

Polished Stainless Steel 2-19/64’’ Rub Rail End Cap Caps rub rail to finish end of rail and ensure that inserts stay intact. Features: Caps rub rail to finish end of rail Ensures inserts stay intact Offers a finished look Stainless Steel Marine Grade 316 Polished 5-Year limited warranty

RH5165 Standard Angle 30° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with 1/2 inch stainless steel lock nut at the bottom of the rod holder.

RH5167V Vertical 0° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

Swivel Base Rod Holders RH5169 Half Angle 15° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

12x12 Polished Stainless Steel Trim Tab Kit Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions. Uflex trim tabs have been specifically designed for easy installation using a quick connect bracket actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.

Polished Stainless Steel Vault Pro - Center Drain Plug & Garboard Assembly The revolutionary stainless steel Vault center drain plug with a gasket and stainless steel garboard. Specifically designed to replace the shorter and far more expensive T-handle center drain plug.  Features: Triangular ergonomic cap - no tools required 8” total length for better reach NPT thread and a backup O-ring for a water-tight fit The matching garboard utilizes a gasket in place of messy silicone sealants *Sold as an Individual

Stainless Steel Retractable Transom Tie-Down - 40" - Pair This stainless steel retractable transom tie-down is one of the best ways to secure your boat to the trailer. The RT40 swivels to ensure that webbing is pulled in a straight line to the boat transom eye. It also features an easy squeeze release mechanism which enables you to quickly and conveniently secure the boat. The optional mounting bracket may be required depending on your trailer. Adjustable up to 48". Sold in pairs.

Stainless Steel Table Base w/Locking Pin Stainless Steel Table Support with Locking Pull Pin Tube Size: 1-5/8'' Flange Dia.: 6-1/4"

Flush Pull Latch Pull to Open - Non-Locking - Polished Stainless Steel Features: Material: 316 Stainless Steel Finish: Electropolished Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 12.000-17.000 mm (0.47-0.67 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Flush Pull Latch - Pull To Open - Non-Locking Polished Stainless Steel Specifications: Material: 316 Stainless Steel Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 17.000-22.000 mm (0.67-0.87 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.