|
Cast Stainless Steel Handle/Latch - 3-3/4" x 3"
The Hatch Handle Latches feature a handle that pivots out to open hatches and lays flush when not in use for a clean appearance. Ideal for use on doors, hatches, lazarettes, and dock boxes. Adjustable locking arm adds additional security. Once installed, the locking arm can be trimmed to length. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).
|
57.07 |
|
|
Stainless Steel Bow Eye - 3/8" x 4-1/4"
These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.
|
15.60 |
|
|
Double Braided Nylon Dock Line - 3/4" x 25' - White
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
38.14 |
|
|
Double Braided Nylon Dock Line - 3/4" x 35' - White
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
57.20 |
|
|
Double Braided Nylon Dock Line - 3/4" x 25' - Black
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
43.74 |
|
|
Double Braided Nylon Dock Line - 3/4" x 30' - Black
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
44.16 |
|
|
Double Braided Nylon Dock Line - 3/4" x 35' - Black
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
61.69 |
|
|
Double Braided Nylon Dock Line - 3/4" x 50' - Black
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
69.65 |
|
|
Polished Stainless Steel Table Pedestal 3" OD x 25-1/2" L
All of TACO's Z76-Series table pedestal columns are tapered on the bottom for a secure fit into the base while also allowing for easy removal and storage.
Features:
Available in satin anodized aluminum rib design or polished stainless steel
Available in three different lengths
Custom heights available based upon minimum order quantities
5-year limited warranty
Specifications:
Finish: Polished
Taper: Single
Material: Stainless Steel
Length: 25-1/2"
|
93.25 |
|
|
Stainless Steel Cushion Clamp - 3/4" - 10-Pack
Nominal Diameter:3/4" (19mm)
Thickness: 0.06
Width: 1/2" (13mm)
Screw Size: #10
Prevents corrosion
Resistant to oils, acids, saltwater
Temperatures range from -50° to 300°F
Absorbs shock and vibration
Reduces unwanted noise
1/4" clearance mounting hole
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.94 |
|
|
Stainless Steel Baby Snap 3/4" - 2-Pack
Features:
Expertly crafted, stainless steel
Designed to match rigorous quality standards
2 per pack, 3/4"
|
9.28 |
|
|
Stainless Cast Steel Flush Mount Rod Holder with Cap - 30°
The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).
|
49.14 |
|
|
Bosworth 74-B-3/4 3/4" Barb
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Hose Barb
|
24.21 |
|
|
Hatch Handle Latch - 3-1/8" x 2-11/16"
Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.57 |
|
|
Hatch Handle Latch - 3-3/4" x 3"
Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
81.91 |
|