|
Set Spare 6 Blade Prop D 185mm for BOW 50, 60, 75, 80 & 95
Propeller 6 blade, diameter 178mm, shaft 13.7mm, for 50/60/75/80/95 kgf bow thrusters.
|
106.56 |
|
|
Set spare 6 blade prop D 185mm f/BOW45/80, until '98
This is a 6 bladed propeller suitable as replacement for the BOW45/80, until '98 Working in close collaboration with the Maritime Research Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimised the performance of its thrusters. This has been achieved by utilising a unique propeller blade profile, which creates little or no cavitation.
As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this new propeller has reduced the current consumption by up to 10%.
|
106.56 |
|
|
Drive Pin Set for BOW 50/60/75/80/95
Replacement Stainless Drive pin for the VETUS BOW 50/60/75/80/95 (5x27.5mm) propeller shaft.
|
47.05 |
|
|
Gasket Tailpiece - 2mm
Features:
Gasket Tailpiece
2mm
Specifically for Bow 35, 55, 60, 75, 80 & 95
|
4.72 |
|
|
6 Blade for 35/55 kgf Bow Thrusters
Propeller 6 blade, diameter 146mm, for 35/55 kgf bow thrusters. Set includes all mounting hardware for propeller. Zinc sold separately.
Working in close collaboration with the Maritime Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller blade profile, which creates little or no cavitation.
As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this propeller has reduced the current consumption by up to 10%.
|
67.68 |
|
|
Zinc 3 Part Folding Prop Ring Anode for Volvo Penta Saildrive 2 & 3 Blade Propellers
Tecnoseal Zinc 3 Part Folding Ring Anode for Volvo Penta Saildrive for Volvo Penta Saildrive 2 and 3 blade folding props for S-Drive range. Fits folding propellers with part numbers 3858506 – 3858512. 3 segments, pre-drilled, comes without fixing bolts.
Volvo part number 3858399 zinc. For use in Salt Water.
|
7.15 |
|
|
Solenoid Switch - 12V
12V solenoid for the BOW50/55/60/75 bowthrusters
|
329.40 |
|
|
MP Pump 25926-30N28BT-50 Mpu Series 80 Brz 50 Hz
This item is 'build to order'. Please contact us for lead time.
|
3360.13 |
|
|
Oberdorfer 104M-06-10F36BJ Centrifugal Pump
FEATURES
Pump Body: Bronze
Ports: Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow: 24 GPM Max
Pressure: to 23 PSI, 53 feet of head
Impeller: Centrifugal
Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft
|
1298.70 |
|
|
Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT Female
Outlet: 1/2" NPT Female and 3/4" NPT Male
Flow:
Up To 24 GPM Maximum
Pressure:
Up To 23 PSI, 53 feet of head
Impeller:
Bronze Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available.
Shaft:
416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use
Motor:
1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
|
1088.10 |
|
|
Oberdorfer 109MB-10J36BJ-50/60 Dometic Low Profile AC Pump
|
1755.94 |
|
|
Oberdorfer 300B-10J36BJ-50/60- Mpu W/316SS Shaft
This item is 'build to order'. Please contact us for lead time.
|
1556.57 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
March 809 PL HS 115V 50/60 115V 50/60 Pump/Base 6'
|
359.45 |
|
|
March 809 SS HS C 115V 50/60 115V 50/60 Beer Pmp/Base 6'
|
444.99 |
|