4.75" Square Base with VESA (4 x 75mm) (4 x 100mm) Hole Patterns & 1.5" Ball Plate Hole Patterns: 100 x 100 VESA Pattern 75 x 75 VESA Pattern 100 x 50 Half VESA Pattern Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Features: Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.59 lbs.

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 2.25" Rubber Ball "D" Size The RAM-D-101U-246, heavy duty universal assembly, includes a universal base piece to mount heavy devices to a flat surface and a 4.75" x 4.75" face plate. It is recommended for mounting heavy devices such as monitors and flat screen electronics. Features a hole pattern for 100mm and 75mm VESA standards. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 1.5" Rubber Ball Size The RAM-101U-246 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball The RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

The RAM-101U-D-246 consists of a long double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

The RAM-101U-B-246 consists of a short double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

2.5" Round Base with 3/8"-16 Female Threaded Hol & 1.5" Ball The RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display Weight: 0.23 lbs.

RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A dapter The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 2.25" Clamping Range (Flat Surfaces): 0" to 2.2"

RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for Cameras The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 3/8"-16 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 3/8"-16 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for Cameras The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 1.7" Base w/AMPs Hole Pattern The powder coated marine grade aluminum base consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal AMPs hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & Round Base Adapter that contains the AMPs Hole Pattern Part #: RAM-B-149Z-202U The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.50" to 1.25" in diameter. The RAM marine grade aluminum base and ball contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2.5" Round Base with the AMPs Hole Pattern, 1.5" Ball & Hardware for Garmin's echo™ 200, 500c & 550c The RAM-202-G4U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8" PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo. Compatible Devices: Garmin echo 200 Garmin echo 500c Garmin echo 550c Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series Fishfinders The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Compatible Devices: Lowrance Elite-5 Lowrance Elite-5 DSI Lowrance Elite-5 Gold Lowrance Elite-5x Lowrance Elite-5x DSI Lowrance Elite-5m Lowrance Elite-5m Gold Lowrance Mark-5x Lowrance Mark-5x DSI Lowrance Mark-5x DSI Portable Lowrance Mark-5x Pro Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders. RAM Double Socket Arm for 1.5" Ball Bases The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size