Spinnaker Pole End - Fits 32mm(1-1/4") OD Pole Suit external mounting on solid or tubular sections. Push-on beak design allows attachment to the pole ring without manually opening the pin. Attachment point for pin release lines. Materials: Chrome plated forged bronze body Stainless steel plunger pin and straps

Series 25 T-Track - Spinnaker Pole - Composite Slide & Stop - 102mm (4") For small keel boats and sports boats, T-Track jib lead and spinnaker pole slides are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on an anodized aluminium track, and allow quick and easy manual adjustment. Specifications: Length: 102mm M.W.L.: 400 kg B.L.: 800 kg Weight: 215 g

Parrel Bead - 32mm(1-1/4") OD - Green - (Single) Max. Rope Ø: 6mm(1/4") Convenient way to terminate control lines while also providing a textured grip for pulling. Recess in one side to contain the stop knot. Impact resistant, U.V. stabilized Nylon

Genoa Car - Fits 32mm (1-1/4") T Track Feature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is through-bolted and riveted for extra strength. A popular range of Genoa cars and sliders designed to run on a 32mm (1-1/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection. Molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion. Features: 'Spectro' grey anodized finish The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 32mm 'T' Section Track Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths. Specifications and Dimensions: Length: 109mm (4.3") Width: 52mm (2.05") Height: 102mm (4.02") Sheave Ø: 50mm (1.97) Max Rope Ø; 2 x16mm (2 x 0.63") Break Load: 3,280kg (7,231.7lbs) SWL: 1,640kg (3,615.6lbs) Weight: 469g (1.03lbs)

Flojet 20381-057 Ports 1/4"Od Straight Push Flojet Snap-In Quad Port Kit with Viton O-Ring 1/4"OD Tube Straight JG John Guest Push-in (pair)

BURKS 9911, GASKET FLAT COMP 1 1/4" OD UNSPSC Code: 40150000

BURKS 9933, FLAT GASKET COMP 1 1/4 OD UNSPSC Code: 40150000

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us

BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are Inches NPT Inlet, Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.   UNSPSC Code: 40150000

Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports

BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.