|
Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope Diameter
Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load.
Features:
360° Rotation
Small T-Cleat & Fairlead
Applications:
Sheet leads and halyards on dinghies and catamarans
Materials:
Alloy cleating arms
Grade 316 Stainless Steel fittings
|
50.53 |
|
|
C-Cleat Cam Cleat - Small - Black w/Black Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.64 |
|
|
C-Cleat Cam Cleat - Small - Grey w/Grey Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
21.16 |
|
|
C-Cleat Cam Cleat - Small - Blue w/Black Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.64 |
|
|
T-Cleat Cam Cleat - Small - Red w/Grey Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. T-cleats have tough glass fiber reinforced cams providing outstanding value for most cleating applications.
Features:
Outstanding value for most cleating applications
High strength
Superior holding power
Lightweight
Corrosion resistant
Self lubricating, self-cleaning bearings
Low line entry effort, easy to release
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.72 |
|
|
Swivel Cleat & Base
Swivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from below
Comes complete with a 28mm(1-1/4") ball bearing sheave, small 'T-Cleat and the 'Fast Track' fairlead.
Applications:
Typically fitted to dinghy and catamaran spars for halyard, cunningham or outhaul control.
Material:
Fiber reinforced Nylon body
Specifications:
Rope Ø: 2 - 8mm(3/32" - 5/16")
M.W.L.: 150kg(330lbs)
B. L.: 300kg(660lbs)
Weight: 100g(3.5oz)
|
51.41 |
|
|
V-Cleat Fairlead - Medium - 4-8mm(3/16" - 5/16") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
10.45 |
|
|
V-Cleat Open - Medium - 4-8mm(3/16" - 5/16") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
9.58 |
|
|
Series 19 C-Track with Slide, Swivel Fairlead, Cleat & Stop
Features:
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing positions
Features a small cam cleat and fairlead - suits line sizes 2-8mm (3/32-5/16")
Applications:
Dinghy and small catamaran jib sheet leads
Dinghy outhauls
Specifications:
Length: 2-13/16"
|
61.73 |
|
|
F25 Splicing Needle w/Puller - Large 6mm-8mm(1/4"-5/16") Line
A range of specialised rope splicing needles for sailors and riggers.
They are specifically designed for use with modern synthetic fibres and rope
constructions, in particular small line sizes where conventional fids/needles don't work.
Features:
"Pull-through" operation
Unique double needle clamps the line making it easy to pull through
Ideal for making "soft shackles"
Ideal for pulling cover plaits into the core for making tapered sheets
Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter
Fixed handle with wire running around full length for maximum strength
|
23.68 |
|
|
Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter
Used to create eyes in both rope and wire rope
|
13.75 |
|
|
Anchor Rode 25' - 8mm Chain - 300' - 9/16" Rope
An anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life.
|
461.72 |
|
|
Chain Grip for 5/16" (8mm) Chain
Perfect to ensure safe anchoring by easing the tension on the anchor chain. Protects the boat by reducing the chafe of the chain on the rub rail and roller chock. Positioned between two links of the chain (single-handed operation). Optimized design to avoid accidental release of the chain.
Features:
One-piece with nonmoving parts
Forged in Duplex stainless steel grade (increased mechanical & corrosion resistance)
Made in France
Rope size: 22 mm
Specifications:
Chain diameter: 8 mm (5/16")
Rope diameter: 17 mm (5/8")
Working load: 480 kg (1,050 lbs)
Breaking load: 890 kg (1,960 lbs)
Weight: 88 g (0.194 lbs)
Length: 85 mm ( 3-11/32")
Applications:
Mouillage
|
43.02 |
|
|
Neoprene Impeller Kit with Cover, Gasket or O-Ring - 6-Blade - 5/16 Shaft Diameter
Jabsco's Neoprene Impeller Kit is used specifically in Jabsco's Water Puppy, Part #6617.
Included:
Cover
Gasket
O-Ring
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.14 |
|
|
Primer Bulb - 5/16" Inner Diameter Hose
This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.
Features:
It is intended for use with a 5/16-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
|
18.89 |
|