V-Cleat Fairlead - Medium - 4-8mm(3/16" - 5/16") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

V-Cleat Open - Medium - 4-8mm(3/16" - 5/16") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

Halyard Shackle - 4.8mm(3/16") Pin Halyard Shackles have a lever action for easy opening and closing, with a keyed pin for positive locking Features: High strength to weight ratio Grade 316 stainless steel bodies and pins

S-Hook - 4.8mm(3/16") Diameter S-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release. Grade 316 stainless steel

Standard Dee Shackle - 4.8mm(3/16") Pin Features: High strength to weight ratio Grade 316 stainless steel bodies and pins

V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications: Control lines on dinghies and catamarans Material: PTFE impregnated, glass and carbon fiber composite cleats

Snatch Block Acetal Sheave - Single - 11mm(7/16") Max. Rope Diameter Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when the load is released. The standard snap shackle head allows the block to swivel through 360°. Soft resilient cheeks reduce clatter and protect gelcoat and painted surfaces. Attachment point provided for shock cord hanger. Features: Easily operated latch mechanism Lightweight Soft resilient cheeks Applications: Temporary sheeting point while changing sheets for boats up to 10M (33') Temporary reefing block for boats up to 10M (33') Spare or replacement block for general use on larger boats depending on line angle and load Materials: U.V. stabilized Acetal sheaves Grade 316 stainless steel frame and load strap Soft thermoplastic rubber cheeks Investment cast Grade 15-5PH stainless steel snap shackle Specifications: Sheave Ø: 51mm(2") Max. Rope Ø: 12mm(1/2") M.W.L.: 500kg(1,100lbs) B.L.: 1,000kg(2,200lbs) Weight: 250g(8.8oz)

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope Diameter Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load. Features: 360° Rotation Small T-Cleat & Fairlead Applications: Sheet leads and halyards on dinghies and catamarans Materials: Alloy cleating arms Grade 316 Stainless Steel fittings

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for 7-8" Tablets Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8” – 5/8” in diameter with a B-sized standard length arm the dynamic X-Grip® for 7”-8” tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Socket technology allows for multiple adjustment angles and articulation of your tablet 4. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 5. Includes Tether for open cockpit and extreme environments 6. Lifetime warranty 7. Rustproof 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for Phones Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" - 5/8" in diameter with a B-sized standard length arm and the dynamic X-Grip® for phones. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded cradle expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Includes Tether for open cockpit and extreme environments 7. Lifetime warranty 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.56 lbs.

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for Larger Phones Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" to 5/8” in diameter with a B-sized standard length arm and the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded cradle expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Includes Tether for open cockpit and extreme environments 7. Lifetime warranty 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size 

Clevis Pin - 4.7mm (3/16") x 19mm (3/4") Grade 316 Stainless Steel

Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball The RAM® Torque™ handlebar and rail mounting base has a 1" rubber ball and accommodates bars 3/8" to 5/8" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Specs & Features Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.21lbs

Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump 80gpm, 1-1/4" Outlet 3/4HP 3PH