Teak Louvered Insert Height:16" Width:9-1/8" Depth:3/4" Cut Out Height:15" Width:8-1/8" Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Teak Louvered Insert Height:9-3/8" Width:18" Depth:3/4" Cut Out Height:8-3/8" Width:17" Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Teak Louvered Insert Height:6-3/8" Width:11-3/16" Depth:3/4" Cut Out Height:5-3/8" Width:10-3/16" Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Teak Louvered Insert Height:7-1/2" Width:9-1/8" Depth:3/4" Cut Out Height:6-1/2" Width:8-1/2" Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Stainless Steel Louvered Vent - 5" x 9"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Louvered Vent - 5" x 2-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Quick Release Pin - 3/16" x 9/16" Specifications: Diameter: 3/16" Grip Length: 9/16" Use with: 15-212

Groco Ibv-750 3/4 Bronze Ball Valve  

Myers Pumps 05014A167 Gasket Rubber Gasket, 8-3/4" OD

Bosworth 74-B-3/4   3/4" Barb   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Hose Barb

SystemPod Pre-Cut f/Simrad NSS9 evo³ & B&G Zeus³ 9 & 1 Instrument - 3.6" Hole f/9.5" Wide Guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

SystemPod Pre-Cut for Raymarine AXIOM 9 & 1 Instrument (3.6″ hole) for 9.5″ Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets)  This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit.  A SystemPod for Sail is best mounted on a Single Bend AngleGuard.  SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit. Structural Rigidity  The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal  All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel  We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

BURKS 350GA6-2-5 1/8, PUMP AND MOTOR UNSPSC Code: 40150000