|
Teak Louvered Insert
Height:7-1/2"
Width:9-1/8"
Depth:3/4"
Cut Out
Height:6-1/2"
Width:8-1/2"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
28.00 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
4028 AC Isolation Cover - 7-1/2 x 10-1/2x3
Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.21 |
|
|
Teak Louvered Insert
Height:9-3/8"
Width:18"
Depth:3/4"
Cut Out
Height:8-3/8"
Width:17"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
52.09 |
|
|
Teak Louvered Insert
Height:6-3/8"
Width:11-3/16"
Depth:3/4"
Cut Out
Height:5-3/8"
Width:10-3/16"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
29.40 |
|
|
Teak Louvered Insert
Height:16"
Width:9-1/8"
Depth:3/4"
Cut Out
Height:15"
Width:8-1/8"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
46.56 |
|
|
Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75
|
1668.60 |
|
|
Ampco Pumps CB+114M14T-S-3.75 Peo 1 1/2 X 1 1/2 Kit
|
1837.08 |
|
|
iPad Rack
Outside: 8"W x 9-5/8"H x 1-1/16"D
Inside: 7-1/2W x 9-5/16"H x 9/16"D
Charging cable cut-out
Can be mounted horizontally or vertically
Pre-drilled mounting holes
|
55.75 |
|
|
Groco Ibv-750 3/4 Bronze Ball Valve
|
34.22 |
|
|
Myers Pumps 05014A167 Gasket
Rubber Gasket, 8-3/4" OD
|
11.34 |
|
|
Bosworth 74-B-3/4 3/4" Barb
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Hose Barb
|
24.21 |
|
|
GP1518 SystemPod Pre-Cut for Simrad GO7/B&G Vulcan 7 & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuard.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 |
|
|
GP1500-17 SystemPod Pre-Cut for Simrad GO7/B&G Vulcan 7 & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuard.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 |
|
|
GP1516 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|