RAM-ROD 2000 Fishing Rod Holder with 1.5" Ball The RAM-117BU consists of the RAM-ROD 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Universal X-Grip® II Tablet Holder with 1.5" Ball for 7'' Tablets including the iPad mini 1-3 The RAM-HOL-UN8BCU consists of a spring loaded holder and 1.5" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BCU expands and contracts for perfect fit of most 7" tablets. The X-Grip® holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 2.25" Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Rustproof 7. Lifetime warranty 8. Made in U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1.5" Rubber Ball Size

Triple Suction Cup Base with 1.5" Ball The RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the RAM-224-3U on a glass or non-porous plastic surface. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.14 lbs.

Universal X-Grip® Holder w/1" Ball Base The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-202-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. The included 1" ball base includes hardware to attach directly to the back of the cradle and is compatible with all "B" size double socket arms. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® holder is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of cradle allows for attachment to many 1" socket arms Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Made in the U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite

RAM 3" Diameter Suction Cup w/1" Plastic Ball Part #: RAP-B224-2U Color: Black Ball Size: 1" Material:: High Strength Composite

RAM 3.68" Diameter Base w/Ball The (RAM-240U), marine grade aluminum base, consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has pre-drilled holes that connects to RAM Tough-Dock Powered Docking Stations. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Long Double Socket Arm for 1.5" Ball Bases The RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 9.125" Socket-To-Socket Length: 8.75" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM Short Double Socket Arm for 1.5" Ball Bases The RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 3.5" Socket-To-Socket Length: 2.25" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM 2" x 4" Rectangle Base with 1.5" Ball The RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 2" Square Base with 1.5" Ball The RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 3" Rectangle Base with 1.5" Ball The RAM-202U-23 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

100 x 100mm VESA Plate w/1.5" Ball This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.  Square plate features the VESA hole pattern for connection to a wide variety of devices Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Material:  Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Plate Size: 4.75" x 4.75" Note: The "U" in the part number reflects product packaged in poly bag.

Triple Suction Cup Base with 1.5" Diameter Ball The RAP-365-224-1U, triple suction cup base, consists of a 1.5" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases at each end. This base has a suction grip, allowing for the connection with 1.5" double socket arms to any non-porous surface, like a windshield, with confidence. Specifications: Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.93 lbs.

RAM Mount Universal X-Grip Holder Diamond Base Surface Mount Part #: RAM-B-102-UN7U The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount Part #: RAM-B-149Z-UN7U The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung Galaxy S7 Samsung Galaxy S7 Edge All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.