|
RAM 14" Long Extension Pole with 1" and 1.5" Single Open Sockets
The RAP-CB-201-14U consists of a SHORT extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in any direction.
Dimensions:
Pole Length (Socket End to Socket End): 14"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
23.15 |
|
|
RAM 18" Long Extension Pole with 1" and 1.5" Single Open Sockets
The RAP-CB-201-18U consists of a LONG extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in any direction.
Dimensions:
Pole Length (Socket End to Socket End): 18"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
28.12 |
|
|
RAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket Arm
The RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm.
Dimensions:
Overall Length (Arm Socket to Ball End): 14"
Pole Length (Ball End to Ball End): 12.75"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
21.56 |
|
|
RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket Arm
The RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm.
Dimensions:
Overall Length (Arm Socket to Ball End): 18"
Pole Length (Ball End to Ball End): 16.75"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
26.04 |
|
|
RAM 12.75" Long Extension Pole with 2 1" Diameter Ball Ends
The RAP-BB-230-14U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms.
Dimensions:
Pole Length (Ball End to Ball End): 12.75"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
13.96 |
|
|
RAM 16.75" Long Extension Pole with (2 qty) 1" Diameter Ball Ends
The RAP-BB-230-18U consists of a LONG extension pole with 2 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms.
Dimensions:
Pole Length (Ball End to Ball End): 16.75"
Features:
1. Extension poles are buoyant, will float if dropped in the water
2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications
3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use
4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch
5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments
6. Lifetime warranty
7. Made in USA
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
18.96 |
|
|
RAM 3" Diameter Suction Cup w/1" Plastic Ball
Part #: RAP-B224-2U
Color: Black
Ball Size: 1"
Material:: High Strength Composite
|
12.62 |
|
|
RAM 12" Long Double Swing Arm with Open Swivel Single Socket
The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size.
Swing Arm Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
59.90 |
|
|
BURKS GA6-1.5MV-5-11/16, PUMP END ONLY with VITON SEAL
UNSPSC Code: 40150000
|
2297.58 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
Double U-Bolt Base w/1" Ball f/Rails from 0.75" to 1.25" Diameter
The RAM-B-235U consists of a double u-bolt base with 1" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.
|
19.79 |
|
|
Ram Pin-Lock™ Security Kit f/ 1" B Size Mounts and Gimbal Brackets
You make a significant investment in the equipment you purchase to make your job or hobby easier or more enjoyable. Whether it's a high end piece of marine electronics, a GPS for your motorcycle, or a tablet used for business purposes, you need to protect your investment. RAM® Mounts protect your device from harmful shock and vibration, but what about theft and tampering? RAM® offers a full suite of security products which protect your device while mounted on your RAM® mount from theft and unwanted tampering. Simply add a security knob or nut to your RAM Mount to deter would-be thieves from targeting your equipment. RAM® security solutions are also a great way to add tamper resistance to your RAM® Mount in situations where there is a desire to prevent end-users from adjusting the mount or removing the device. High strength composite and brass construction assures a long life of trouble free use in a wide variety of environments including marine and salt water.
|
19.33 |
|
|
RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 |
|
|
Universal X-Grip® Holder w/1" Ball Base
The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-202-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. The included 1" ball base includes hardware to attach directly to the back of the cradle and is compatible with all "B" size double socket arms. Please verify dimensions of your tablet below for compatibility with the X-Grip®.
The X-Grip® holder is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
Features:
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of cradle allows for attachment to many 1" socket arms
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Multiple mounting access points on the back of the cradle
Additional support keeper at the bottom of the cradle
Full access to all ports
Lifetime warranty
Made in the U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
|
79.69 |
|
|
Small Tough-Claw™ Base w/1" Ball & M6 x 30 SS Hex Head Bolt f/Raymarine Dragonfly-4/5 & WiFish
The RAM-B-400-379-M616U consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM-B-400-379-M616U reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.
|
48.68 |
|