|
Yamada NDP-15BST 1/2" SS Teflon Pump
NDP-15BST AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® NDP-15BST series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 13.5 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction, with a wide variety of diaphragm materials.
Inlet (in)1/2
Outlet (in)1/2
Max Flow (gpm)13.5
Max Temp212
Max Solid (in)1/32
Valve Type (in)1/4
Air Motor MaterialRyton
Body MaterialStainless Steel
Elastomer MaterialPTFE
|
1516.80 |
|
|
March 1A-MD-1/2 Mag Drive Pump
March Pump's industrial 1A-MD-1/2 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-1/2 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 115V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-1/2 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1A-MD-1/2 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-1/2 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.
Inlet: 1/2"OD
Outlet: 1/2"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses:Submersible or Open Air
When submerged, the following is also in contact with the solutionEpoxy, Noryl, SJT Cord
P/N:0115-0007-0200 (115V)
|
317.85 |
|
|
March 1A-MD-1/2 Mag Drive Pump
March Pump's industrial 1A-MD-1/2 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-1/2 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-1/2 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1A-MD-1/2 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-1/2 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.
Inlet: 1/2"OD
Outlet: 1/2"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses:Submersible or Open Air
When submerged, the following is also in contact with the solutionEpoxy, Noryl, SJT Cord
P/N 0115-0007-0700 (230V)
|
320.78 |
|
|
Yamada 770933 Diaphragm
For Series NDP-15, NDP-15BST
|
49.34 |
|
|
Yamada NDP-20BPT-PP FLANGE Poly Teflon Pump Flanged
Yamada NDP-20BPT-PP-FLG Air Operated Double Diaphragm Pump - 3/4" Flange with Polypropylene Body and PTFE Diaphragms
NDP-20 series 3/4"" AODD pumps provide a maximum flow rate of 31.7 GPM and are available in Aluminum, Stainless steel (316), and Polypropylene.
NDP-20 SPECIFICATIONS
Fluid Port3/4"" NPT
GPM31.7
Discharge Volume Per CycleRubber 0.163 Gallons PTFE 0.143 Gallons
Air MotorMetal Pump - Aluminum Air Motor Plastic Pump - Non-Metallic
Intake & Discharge Connections
Polypropylene (PPG)3/4"" Female NPT or 3/4"" ANSI Flange B16.5 #150
Aluminum (ADC-12)3/4"" Female NPT
Stainless Steel (316)3/4"" Female NPT
Air Inlet 3/8"" Female NPT (includes ball valve)
Air Exhaust3/4"" Female NPT (includes silencer)
|
1161.60 |
|
|
Yamada NDP-15VD Drm Pmp Kit Ndp-15Fv Series
|
804.78 |
|
|
Yamada NDP-20 SD Drm Pmp Kit Ndp-20Bs Series
|
993.48 |
|
|
Yamada NDP-80BPT 3" Poly/Tef Pump
NDP-80BPT AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® NDP-80BPT series is the flagship of the NDP line of Air Powered Double Diaphragm (AODD) pumps, providing a maximum flow rate of 214 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, and polypropylene construction, with a wide variety of diaphragm materials.
Inlet (in) 3
Outlet (in) 3
Max Flow (gpm) 215.0
Max Temp 212
Max Solid (in) 13/32
Valve Type (in) 3/4
Air Motor Material Aluminum
Body Material Polypropylene
Elastomer Material PTFE
|
8252.40 |
|
|
Yamada NDP-80BAN 3" Alum/Buna Pump
NDP-80BAN AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® 80BAN series is the flagship of the NDP line of Air Powered Double Diaphragm (AODD) pumps, providing a maximum flow rate of 214 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, and polypropylene construction, with a wide variety of diaphragm materials.
Inlet (in)3
Outlet (in)3
Max Flow (gpm)215.0
Max Temp180
Max Solid (in)13/32
Valve Type (in)3/4
Air Motor MaterialAluminum
Body MaterialAluminum
Elastomer MaterialBuna N
|
2442.60 |
|
|
Yamada NDP-20BAN-D Drum Pump
Yamada Pumps NDP-20BAN Type, Model 851515 NDP-20 Series, Air Operated Double Diaphragm Pump, Buna N Diaphragm, Buna N Flat Check Valve / O-Rings, Aluminum (ADC-12) Material, 31.7 GPM Max Flow, 3/4" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
|
1228.80 |
|
|
Yamada NDP-20BPC Polypropylene Pump
Yamada NDP-20BPC Air Operated Double Diaphragm Pump - 3/4" NPT with Polypropylene Body and Neoprene Diaphragms
NDP-20 series 3/4"" AODD pumps provide a maximum flow rate of 31.7 GPM and are available in Aluminum, Stainless steel (316), and Polypropylene.
NDP-20 SPECIFICATIONS
Fluid Port3/4"" NPT
GPM31.7
Discharge Volume Per CycleRubber 0.163 Gallons PTFE 0.143 Gallons
Air MotorMetal Pump - Aluminum Air Motor Plastic Pump - Non-Metallic
Intake & Discharge Connections
Polypropylene (PPG)3/4"" Female NPT or 3/4"" ANSI Flange B16.5 #150
Aluminum (ADC-12)3/4"" Female NPT
Stainless Steel (316)3/4"" Female NPT
Air Inlet 3/8"" Female NPT (includes ball valve)
Air Exhaust3/4"" Female NPT (includes silencer)
|
1060.80 |
|
|
Yamada NDP-20BPS-T1-BSPT-PP 3/4 Diaphragm Pump
|
1406.40 |
|
|
Yamada NDP-25BVS Pump Diaphragm
|
2132.16 |
|
|
Yamada NDP-20BPT-PP 3/4" Poly Teflon Pump
NDP-20BPN-PP AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® NDP-20BPN-PP series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 28 gallons per minute. Pumps are available in aluminum, stainless steel (316), and polypropylene construction, with a wide variety of diaphragm materials.
Inlet (in)3/4
Outlet (in)3/4
Max Flow (gpm)31.7
Max Temp212
Max Solid (in)1/16
Valve Type (in)3/8
Air Motor MaterialPolypropylene
Body MaterialPolypropylene
Elastomer MaterialPTFE
|
1084.80 |
|
|
Yamada NDP-20BAT 3/4" Alum Teflon Pump
Yamada® NDP-20BAT series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 28 gallons per minute. Pumps are available in aluminum, stainless steel (316), and polypropylene construction, with a wide variety of diaphragm materials.
Inlet (in): 3/4
Outlet (in): 3/4
Max Flow (gpm): 31.7
Max Temp: 212
Max Solid (in): 1/16
Valve Type (in): 3/8
Air Motor Material: Aluminum
Body Material: Aluminum
Elastomer Material: PTFE
|
1032.00 |
|