|
Universal Round Mounting Pad. 4.825” in diameter. Useful for mounting GPS, Fish Finder, Speakers, etc. with larger round or square bases. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
23.00 |
|
|
Universal Round Mounting Pad. 3 ½” in diameter. Useful for mounting GPS, Fish Finder, Speakers, etc. with smaller round or square bases. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
21.00 |
|
|
A practical, cost effective, general-purpose 4” diameter mounting pad. Perfect for mounting your GPS receiver, fish finder, spotlight, fan, speakers, etc. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.
|
21.00 |
|
|
A practical, cost effective, general-purpose 4” diameter mounting pad. Perfect for mounting your GPS receiver, fish finder, spotlight, fan, speakers, etc. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
21.00 |
|
|
SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder
The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.
|
75.00 |
|
|
SnapIt! Marine T008 Sailboat Winch Handle Pocket
End the search for that elusive winch handle! Snap this unique holder to the pedestal guard where it can easily be reached from either side of the boat or get two and mount them on a stanchion near the winch. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
34.00 |
|
|
The most economical general-purpose 4” diameter mounting pad available. Perfect for mounting your GPS receiver, fish finder, spotlight, fan, speakers, etc. The perfect gift when you don’t know the diameter of the tubing. Comes with mounting hardware for 7/8, 1, 1 1/8 and 1 1/4" round tubing. Plus offers the option of bulkhead mount with enclosed screws. Designed for permanent mounting.
|
21.00 |
|
|
A unique permanently mounted mounting pad that utilizes the wasted space at the top of your pedestal guard specifically designed for mounting small electronic holsters with round bases. Brings your instrument where it can easily be seen. Pad diameter is 3". Comes with mounting hardware for 1, 1 1/8 and 1 1/4" round tubing.
|
11.00 |
|
|
Universal Mounting Pad. 3”x6”. Useful for mounting GPS, Fish Finder, Speakers, etc. with rectangle bases. Mounting angle is adjustable. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
23.00 |
|
|
SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder
This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc.
Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White
|
62.00 |
|
|
SnapIt! Marine P005 Top Mount Pontoon Quad Drink Holder
Quad Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Mug Opening Diameter 3.625”. Interior Dimension 3.895”(3.45” at narrowest point)x8.12”. Overall Height 3. 6”. Overall Width 18.4”. Top mount unit can be used in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
62.00 |
|
|
SnapIt! Marine P0011 Folding Lunch Table for Pontoon Boats
This Folding Lunch Table for Pontoon Boats measures 21”x13.5”. Lunch table mounts permanently to 1 ¼” square rail commonly found on pontoon boats. Self supporting it folds down and out of the way when not needed.
No drilling required. All mounting hardware included. Color: White.
Custom made at time of order, none returnable.
|
169.00 |
|
|
SnapIt! Marine P002 Pontoon Boat Double Drink Holder
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.86”. Cutout on top ring can be useful for hanging sunglasses, etc. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
SnapIt! Marine P001KR Pontoon Boat Single Drink Holder
Single Drink Holder sized to fit can drinks with insulated sleeves and many mugs. I.D. 3.625” Overall Height 3.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
23.00 |
|
|
SnapIt! Marine BRK Pontoon Boat Universal Mounting Bracket
Universal Mounting Bracket. The use of additional mounting brackets allows the option of utilizing the removable accessories at different locations on the boat. Color: White.
|
4.50 |
|