|
Oberdorfer Cent Pump Ped Mnt 3/4 X 1/2
Ag Pump for Heat and Humidity Control
Oberdorfer Ag pumps are the right product for the job. Our Ag pumps can pump fuel oil to the oil burner and heat water. Water Is heated to approximately 120 degrees Fahrenheit, and sprayed into the cotton batt, making it suitable for any need. Your company’s processing, bailing, and shipping efforts will be much more efficient after being outfitted with these hard working ag pumps.
Max Flow 25 GPM
Max Pressure 29 PSI
Rugged Bronze Construction
Quiet Operation
O-Ring Housing seal eliminates gasket problems
Mechanical Seal - Carbon/Ceramic, Nitrile - standard, Fluoroelastomer (S10) or Polytetrafluoroethylene (PTFE) (S11) - options
Designed for Pulley Drive
Heavy Duty Integral Steel Shaft and Ball Bearings
Handles Contaminated Liquids
No bearing lubrication required
|
674.06 |
|
|
Oberdorfer N4000-S3 Gear Pmp Ped Mt Bun Lipseal
|
603.75 |
|
|
Oberdorfer N3000L Gear Pump Ped Mt 1/2 Brz
|
584.06 |
|
|
Oberdorfer N4000R Gear Pump Ped Mt Rv Carbon
|
696.56 |
|
|
Oberdorfer N3000-S3 Gear Pump Ped Mnt 3/8" Buna
|
555.94 |
|
|
Oberdorfer N3000 Gear Pump Ped Mnt 3/8" Brz
|
584.06 |
|
|
Oberdorfer N3000R Gear Pump Ped Mnt 3/8" Rv
|
670.31 |
|
|
Oberdorfer N301M-04 Pump Base Mt 3/4 Buna Buna
Two Sealed Ball Bearings Spaced for Maximum Load Ability. Extra Capacity Ball Bearings plus Rugged Construction for Prolonged Service Life. Impeller Easily Replaced. Buna N O-ring Between Body and Cover Eliminates Gasket Problems. Machined-in cam for reduced impeller wear. Suction lift of 15 feet is possible when impeller is wet.
FEATURES
Pump Body:Bronze
Ports:3/4" NPT
Flow:22 GPM Max
Pressure:49 PSI Max, 110 feet of head
Impeller:Neoprene Standard, Buna Optional
Shaft Seal:Buna Mechanical Standard, Buna Lip Optional
Shaft:High Chrome Nickel Stainless Steel Shaft 5/8"
Motor / Drive:Either direct drive with flexible coupling or pulley drive can be used. We have many motor options available and can assemble for you.
|
741.56 |
|
|
Oberdorfer N301M-01 Pump Base Mt 3/4 Neo Imp Bun
Two Sealed Ball Bearings Spaced for Maximum Load Ability. Extra Capacity Ball Bearings plus Rugged Construction for Prolonged Service Life. Impeller Easily Replaced. Buna N O-ring Between Body and Cover Eliminates Gasket Problems. Machined-in cam for reduced impeller wear. Suction lift of 15 feet is possible when impeller is wet.
FEATURES
Pump Body:Bronze
Ports:3/4" NPT
Flow:22 GPM Max
Pressure:49 PSI Max, 110 feet of head
Impeller:Neoprene Standard, Buna Optional
Shaft Seal:Buna Mechanical Standard, Buna Lip Optional
Shaft:High Chrome Nickel Stainless Steel Shaft 5/8"
Motor / Drive:Either direct drive with flexible coupling or pulley drive can be used. We have many motor options available and can assemble for you.
|
816.30 |
|
|
Oberdorfer N994Rh-M26 Gear Pump 1/2" 3/4 Hp Rv
|
2123.10 |
|
|
Oberdorfer 600 Cent Pump Peo Brz 3/4 X 1/2
|
536.25 |
|
|
Oberdorfer 172B Cent Pump Peo Brz 3/4" Prt
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
13 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seals - Type 6A/68 Buna Standard, Viton Optional
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP permanent Magnet 12V, 24V, 32V DC.
Rubber base grommets for vibration dampening
1/13 HP Permanent Magnet 12V DC Motor - 172L threaded shaft style.
1/8 HP Capacitor Start 50/60 HZ, 115V & 220V AC Motors with Ignition protection, Thermal overload protection, Power cord with plug.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump Head Only, Bronze, 3/4"NPT P
|
399.75 |
|
|
Oberdorfer 170M-A81 Cent Pump 12V Brz 3/4 Ports
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
12 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Buna Lip Seal Standard, Optional Viton lip
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP Permanent Magnet 12V, 24V, 32V DC Motors.
Rubber base grommets for vibration dampening.
Available with 1/13 HP Permanent Magnet 12V DC Motor (A95).
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump, Bronze, 12V Motor, 3/4"NPT Ports
|
712.50 |
|
|
Oberdorfer 170M-A82 Cent Pump 24V Brz 3/4 Ports
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
12 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Buna Lip Seal Standard, Optional Viton lip
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP Permanent Magnet 12V, 24V, 32V DC Motors.
Rubber base grommets for vibration dampening.
Available with 1/13 HP Permanent Magnet 12V DC Motor (A95).
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump, Bronze, 24V Motor, 3/4"NPT Ports
|
774.00 |
|
|
Oberdorfer 170M-A87 Cent Pump 32V Brz 3/4 Ports
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
12 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Buna Lip Seal Standard, Optional Viton lip
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP Permanent Magnet 12V, 24V, 32V DC Motors.
Rubber base grommets for vibration dampening.
Available with 1/13 HP Permanent Magnet 12V DC Motor (A95).
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump, Bronze, 32V Motor, 3/4"NPT Ports
|
793.80 |
|