MP Pump 50418 Swx125Pmp B:1/3-1 56J 2.95

MP Pumps 34741 FRX50 Series 316 Stainless Steel 12V DC Circulator 1/2 " NPT Pump   MP Pumps FRX50 Stainless Steel Circulator Pump # 34741. Ideal for Marine, Industrial and Commercial, Flows about 12.5 GPM, pressures 16.5 feet head, 3/4" suction & discharge, 316 stainless steel construction.   Specifications Construction: Stainless steel Housing and Cover, 304 Stainless Steel Base with viton O-rings, 316 stainless steel impeller semi open (sintered PM).  Mechanical Seal: carbon/ceramic/viton bellows  Motor: 12 Volt DC.  Suction & Discharge Connections: 1/2" NPT, 1" Hose  

Get 10% OFF an N76-46P Pump Body Today!   Flotec N76-46P Pump Body   This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass. The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.  For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN. N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN   Get Your Coupon Code Today!

MP Pump 50416 Swx125Pmp B:1/2-3 56J 3.25

MP Pumps 22376 Wear Plate Assembly MP Pumps Replacement Parts for the Flomax 15 For Pump Model 34650 Wear Plate Assembly  

MP Pumps 22358 FLANGE GASKET DISCHARGE MP Pump Replacement Parts for the Flomax 15 for Pump Model 34650

MP Pumps 22361 SHAFT SEAL MP Pumps Replacement Parts for the Flomax 15 For Pump Model 21381

MDM Pumps G201 B ASM Imp Cap Assy W/Buna Oring

MDM Pumps G203 B Buna Case Oring

MDM Pumps G200 B ASM Impeller Cap Assembly

MP Pump 23241 Pump Series 110 Ci Gas Eng MP Pumps 23241 Series 110 End Suction Centrifugal Pump Cast The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron, bronze or aluminum construction to suit a wide variety of liquids. All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.

MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part #: MP21381 Size: 3 in. NPT Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine OEM  

MP Pump 29342 Flomax 15 Hydro-Drive MP Pumps 29342, FLOMAX 15 Self Priming Centrifugal Hydraulic Pump, 3" X 3" NPT Ports, Capacity up to 320 GPM, Total Head up to 145 feet. FM15PMP B: PED/HYD 5.75

MP Pumps 21372 Flomax 15 Self Priming Centrifugal Pump for Water & Fertilizer FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part# 21372 Configuration: Pumpak PORTS: 3 in. Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine

MP Pumps 21259 CAPSCREW SS HH 3/8-16X1 3/8