Oberdorfer 5930 Machine Screw 5/16 X 1"  

MP Pump 27474 S130Ppk 2X1.5 Cfr 5/8 MP Pumps 27474, Series 130 Standard End Suction Centrifugal Pump End Only, 2" x 1-1/2" NPT Ports, Capacity up to 160 GPM, Total Head up to 60 feet. S130PPK C: 2X1.5 CFR 5/8 3.38 BI

Quick Release Pin - 5/16" x 1" Grip Quick Release Pin, 5/16" x 1.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs.

Quick Release Pin - 5/16" x 1.5" Grip Quick Release Pin. 5/16" x 1.5" Grip. 316 Stainless Steel. Safe Working Load 4600 lbs.

Material: 304 Stainless Steel Stock: 5/16" Eye Ring Diameter: 1" Thread Length: 1-3/8" Wall Plate Size: 3/4" x 2-1/4"

Little Giant& Sub. Sump Pump 526003 Little Giant NK-1 Submersible Pump Motor 115 Volt 60 Hz 1/150 HP Permanently Lubricated Oil Filled Motor, 210 GPH at 1 Foot Head, Shutoff Head 10.2 Feet, Inlet: Screened, Outlet: 1/4" MNPT or 1/2" Tubing with Elbow Fitting, Nylon Body, Fluid Temperature Up to 120F (49C), 6 Foot Power Cord   526003 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions and fertilizers.

Little Giant Sub. Pump 518200 Little Giant PE-1 Submersible Pump Motor 115 Volt 60 Hz 1/125 HP Epoxy Encapsulated Oil-Less Direct Drive Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Smooth Volute with Snap Off Screen, Outlet: 1/4" MNPT or 1/2" Tubing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 6 Foot Power Cord   518200 Small submersible, epoxy-encapsulated pump for commercial, industrial, and home use. Applications include statuary fountains, water displays, air conditioners, machine tools, and many other applications where liquid must be transferred or recirculated.   Not recommended for fuel oil transfer, aquariums, and swimming pools.

MP Pump 28059 Stud 5/16 X 1.19

MP Pumps 22244 WEAR PLATE MP Pumps Replacement Parts for the Flomax 15 Pump Model 21381 Wear Plate - Steel 

MP Pumps 22240 GASKET MP Pumps Replacement Part for the Flomax 15 Pump Model 21381 Gasket .032    N-2085

MP Pump 21937 Sq Key Stl 3/16 X 3/16 X3/4

MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part #: MP21381 Size: 3 in. NPT Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine OEM  

MP Pumps 21588 SEAL BUNA 5/16

MP Pump 23241 Pump Series 110 Ci Gas Eng MP Pumps 23241 Series 110 End Suction Centrifugal Pump Cast The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron, bronze or aluminum construction to suit a wide variety of liquids. All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.

MP Pumps 21383 FM 15 BRONZE PUMP MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   3" X 3" NPT Ports Capacity up to 320 GPM Total Head up to 145 feet Bronze construction 5.75 inch diameter impeller