|
MP Pump 23221 Series 30 Standard End Suction Centrifugal Pump End Only
1" x 3/4" NPT Ports, C
apacity up to 45 GPM
Total Head up to 40 feet
S30PPK C: RR 1X3/4 CFR 5/8 3.25 IMP
|
559.69 |
|
|
MP Pump 23220 S30 Pumpak
MP Pumps 23220
Series 30 Standard End Suction Centrifugal Pump End Only
1" x 3/4" NPT Ports
Capacity up to 45 GPM
Total Head up to 40 feet
S30PPK B: RR 1X3/4 CFR 5/8 3.25 IMP
|
1449.00 |
|
|
MP Pumps 21248 Gasket
Gasket Size 1/2 x 5/16 x 1/16
|
0.95 |
|
|
MP Pump 29852 Ped Pump Series 200
MP Pumps 29852, Series 200 Standard End Suction Centrifugal Pump, 2-1/2" x 2" NPT Ports, Capacity up to 300 GPM, Total Head up to 115 feet. S200PMP B: R 2.5X2 PED/CL 5.5 IMP
|
4484.10 |
|
|
MP Pumps 29809 HTO 120 2" x 1-1/2" End Suction Centrifugal Hot Oil Pump
Ductile Iron, Pumped, Closed Coupled without motor 145TC, 5.96" Impeller, Horizontal Discharge
Please Note: Photo DOES NOT represent actual item
HTO120 is a patented, unique centrifugal pump designed for high temperature applications, such as the plastics, chemical, food and processing industries. The pump can be used in horizontal or vertical positions.
It is designed to greatly reduce the temperature at the seal by utilizing ambient air temperature which greatly increases seal life.
|
2388.26 |
|
|
MP Pumps 36382 CFB3 CHEMFLO NIAB 56C PEO
CHEMFLO 1 CFB End Suction Centrifugal Pump End Only, 316 Stainless Steel, 1-1/2" x 1" NPT Ports, Capacity up to 103 GPM, Total Head up to 128 ft. CFB3PPK B: 2-1.5 56C 5.25
|
1101.60 |
|
|
MP Pump 25669 Ser 80 Pmp For 145Tc 5.9Imp
An open adaptor protects the motor on this Series 80 industrial liquid pump. This end suction centrifugal pump is available in a cast iron, aluminum, or bronze construction to fit application specific needs. A NEMA “C” face motor is used to drive this pump, guaranteeing efficiency levels stay high. Stainless steel fasteners are fitted into the Series 80 centrifugal pump to prevent any corrosion from happening.
Specifications
SUCTION AND DISCHARGE1-1/2" x 1-1/4" NPT
APPLICATIONAgricultural, Commercial, Industrial, OEM
MATERIALS OF CONSTRUCTIONBronze, Cast iron
FLOWUp to 80 GPM
HEAD FEETUp to 139'
IMPELLER5.9" enclosed
MOTORUp to 3 HP
DRIVE OPTIONSClose coupled 56J, Hydraulic motor .37 cu. in., Hydraulic motor .45 cu. in., Hydraulic motor .58 cu. in., Close coupled 145TC, Pedestal, PumPAK® (without motor)
SEALSpecial seal material combinations available (consult factory), Standard carbon / ceramic / Viton
MAX SOLID SIZE.13"
|
943.20 |
|
|
MP Pumps 23234
Series 200 Standard End Suction Centrifugal Pump End Only, 2-1/2" x 2" NPT Ports, Capacity up to 300 GPM, Total Head up to 115 feet. S200PPK C: RR 2.5X2 CFR 1.12 4.62 IMP
|
1580.40 |
|
|
MP Pumps 21301 Flomax 5 Pump Pak Bronze 3/4 Eng Mnt, 1-1/2" x 1-1/2"
FLOMAX 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line. A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and more.
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
|
2747.93 |
|
|
Door Hinge
Size:1-1/2" x 4"
Fastener: #8(6)
Material: 316 Stainless Steel
|
18.89 |
|
|
MP Pumps 25979 FM5-CI-56C PUMP
Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 56C NEMA motors less feet.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI
Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer.
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" driver shaft; viton mechanical seal.
Pump water end only less motors.
Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz
Motor Frames Required 56C NEMA motors less feet
|
790.20 |
|
|
MP Pumps 26074 Flomax 5 C/I MT 7/8"
Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 184C/145TC NEMA motors with feet.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI
Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT
Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.
Pump water end only less motors
Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz
Motor Frames Required 56C NEMA motors less fit or 184C/145TC NEMA motors with feet.
|
810.00 |
|
|
Stainless Steel Door Hinge - 1-1/2" x 4-1/8"
The Door Hinges are constructed of corrosion resistant investment cast 316 stainless steel. Installs with six #10 FH fasteners (not included).
|
25.40 |
|
|
Description: Plate: 3/4" x 3"
Stock: 1/2"
Eye Ring Diameter: 1-1/2"
Thread Length: 4-3/4"
|
30.34 |
|
|
Ampco AC114 Beverage Beer Pump Cart
Ampco beverage beer pump cart is suitable for AC114 sanitary centrifugal pump
Can be used for all wort and beer transfer, as well as CIP (clean in place) functions
Ampco sanitary AC114 pump with 10-1/2 x 1-1/2 in tri-clamp connections
Rated for 70 gpm at 45 ft TDH 1.5 hp, 115 VAC 1 ph 20 A circuit
Manual dial VDF in waterproof enclosure
Pre-wired with 25 ft extension cord with 3-prong 115 VAC wall plug
Sanitary design compact stainless steel cart with solid urethane wheels and cord hanger
Please allow a lead-time of about 7-10 days.
|
3283.09 |
|